CYP CSC-6012TX User manual

CSC-6012TX & CSC-6012RX

4K UHD+ HDMI over HDBaseT

Scaling Transmitter and Receiver

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE (DD/MM/YY) SUMMARY OF CHANGE

RDV1 30/08/16 Preliminary release

VS1 20/06/17 Updated text/diagrams

CONTENTS

1. Introduction......................................................1

2. Applications.....................................................2

3. Package Contents ..........................................2

4. System Requirements......................................3

5. Features............................................................4

6. Operation Controls and Functions.................5

6.1 Transmitter's Front Panel ........................... 5

6.2 Transmitter's Rear Panel............................ 5

6.3 Receiver's Front Panel............................... 7

6.4 Receiver's Rear Panel ............................... 7

6.5 IR Cable Pin Assignment........................... 9

6.6 OSD Menu................................................ 10

6.6.1 Transmitter's OSD Menu................. 10

6.6.2 Receiver's OSD Menu .................... 16

6.6.3 Common Conversion Rules .......... 22

6.6.4 Transmitter's Conversion Rules ...... 23

6.6.5 Receiver's Conversion Rules ......... 25

7. Connection Diagram ....................................28

8. Specications ................................................29

8.1 Technical Specications ........................ 29

8.2 Video Specications............................... 31

8.3 Audio Specications............................... 32

8.4 Cable Specications .............................. 32

8.4 HDBaseT Features.................................... 33

9. Acronyms .......................................................34

1. INTRODUCTION

Transmitter

This HDMI to HDMI/HDBaseT Scaling Transmitter can send

uncompressed audio/video along with control, Ethernet, and extra

audio data over a single run of Cat.5e/6/7 cable up to 100m. Both

the HDMI input and local HDMI output support video signals up to

4K@60Hz (4:4:4, 8-bit). For transmission over the HDBaseT output the

signal can be converted to 4K@60Hz (4:2:0, 8-bit) or 1080p@60Hz, if

necessary, in order to t within HDBaseT bandwidth limitations. Simple

18Gbps HDMI test patterns are also available to be output. Control of

remote devices is possible via bi-directional RS-232 or IR as well as via

a LAN connection. A balanced analog audio output provides users

with additional audio exibility. The 48V PoH design can power the

connected Receiver (PD), eliminating the need for an extra power

supply while the Transmitter itself is powered through the local 24V

power supply.

Receiver

This HDBaseT to Dual HDMI Scaling Receiver can receive

uncompressed audio/video along with control, Ethernet, and extra

audio data over a single run of Cat.5e/6/7 cable up to 100m. While

the HDBaseT input is limited to a maximum of 4K@60Hz (4:2:0, 8-bit),

this unit can automatically convert or scale the input to output at

4K@60Hz (4:4:4, 8-bit) depending on the detected capability of

the connected display. Simple 18Gbps HDMI test patterns are also

available to be output for easy testing of local equipment. Control

of remote devices is possible via bi-directional RS-232 or IR as well as

via a LAN connection. Digital OAR (Optical Audio Return) support

at 48kHz and a balanced analog audio output provides users with

additional audio exibility. The 48V PoH design can receive power

from the connected Transmitter (PSE), eliminating the need for a local

power supply, however power via 5V power supply is also supported if

needed.

2. APPLICATIONS

• Live events needing dual output formats and signal extension

• Hotel ballroom with extension and audio breakout

• Long distance extension with no local power available at the Rx

side

• On-site equipment testing

3. PACKAGE CONTENTS

Transmitter

• 1×HDMI over HDBaseT Scaling Transmitter

• 1×IR Blaster Cable

• 1×IR Extender Cable

• 1×Terminal Block (3-pin)

• 1×Terminal Block (5-pin)

• 1×Power Cord

• 1×24V/2.7A DC Power Adaptor

• 1×Operation Manual

Receiver

• 1×HDMI over HDBaseT Scaling Receiver

• 1×IR Blaster Cable

• 1×IR Extender Cable

• 1×Terminal Block (3-pin)

• 1×Terminal Block (5-pin)

• 1×5V/3A DC Power Adaptor

• 1×Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI source equipment such as media players, video game

consoles or set-top boxes.

• HDMI receiving equipment such as HDTVs, monitors or audio

ampliers.

• Transmitter requires a compatible HDBaseT™ receiver with 48V PoH

support. An HDBaseT™ receiver equipped with Optical Audio Return

(OAR) channel support are strongly recommended.

• Receiver requires a compatible HDBaseT™ transmitter as a

video source. An HDBaseT™ transmitter equipped with Optical

Audio Return (OAR) channel support and 48V PoH is strongly

recommended.

Notes:

• When displaying 4K HDR, or an equivalent signal, an appropriate

display is required in order to obtain the best image.

• HDMI cable distance can be impacted by the materials and design

of the cable used. The use of “Premium High Speed HDMI” cables is

highly recommended.

5. FEATURES

• Supports the HDBaseT 1.0 specication

• HDBaseT 5Play™ convergence: High-Denition (HD) Video and

Audio, 100BaseT Ethernet, 48V PoH, and Control (Bi-directional IR/

RS-232 pass-through)

• Supports UHD resolutions up to 3840×2160@50/60Hz (YUV 4:4:4) &

4096×2160@50/60Hz (YUV 4:4:4)

• Supports pass-through of all standard digital audio: LPCM 2.0/5.1/7.1,

Bitstream & HD Bitstream

• Supports RS-232 baud rates from 110~115200bps

• 10/100 Ethernet network support

• Fully compliant with HDMI 1.4, and compatible with HDMI 2.0

(4K@60Hz, YUV 4:2:0)

• HDMI with 18Gbps (600MHz) 4K support and HDCP 2.2 compliant

• Supports Deep Color up to 1080p/12-bit

• Supports DVI to HDMI conversion

• Supports signal bypass on HDMI output (on the Transmitter)

• Transmitter can upscale 1080p signals to 4K over HDBaseT output or

downscale 4K signal to 1080p (same framerate is maintained)

• Receiver supports signal bypass on both outputs or output B can

upscale 1080p signals to 4K and output A can downscale a 4K

signal to 1080p (same framerate is maintained)

• Supports 4K UHD (4:4:4) to 4K UHD (4:2:0) conversion

• Supports OAR (Optical Audio Return) and DAC audio balance

conversion

• Test pattern generation at select resolutions for on-site display

testing

• Integrated EDID management

• OSD with instant I/O resolution display

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Transmitter's Front Panel

4K UHD+ HDMI to HDBaseT Scaling Tx

POWER 4K2K SYNC MENU ENTER

TEST PATTERN

SERVICE

1 2 3 4 5 6 7

1SERVICE: This slot is reserved for rmware update use only.

2POWER: This LED will illuminate to indicate the unit is on and

receiving power.

34K2K: This LED will illuminate to indicate the input source contains a

4K UHD signal.

4SYNC: This LED will illuminate when a live input source is detected.

5MENU: Press to enter the OSD menu, or to back out from menu

items. Press and hold this button together with the “-” button for 3

seconds to reset the unit back to factory defaults.

6DOWN & UP/TEST PATTERN: When the OSD menu is in use, press

these buttons to move within the menu. Outside of the OSD,

press these buttons together to instantly set the output timing to

1280×720@60Hz and display test patterns on both outputs.

7ENTER: Press to conrm a selection or to go deeper into a menu

item.

6.2 Transmitter's Rear Panel

DC 24V

LAN HDMI OUT HDMI INCAT5e/6/7 OUT

IR OUTIR IN LR

+ −

RX TX

+ −

AUDIO OUTRS232

1 2 3 4 5 6 7 8 9

1LAN: Connect to an Ethernet supporting device or to your local

network as appropriate. The yellow LED will illuminate to indicate a

successful LAN connection between the Transmitter and Receiver,

however, if the yellow LED blinks irregularly it indicates a data link

error. The green LED will illuminate when the connected Ethernet

This manual suits for next models

Table of contents

Popular Receiver manuals by other brands

Garmin

Garmin GA 23 Owner's manual and reference guide

Aiphone

Aiphone PS-12F instructions

IMES

IMES TCS-01CA-PMI Original Operating Instruction

BWI Eagle

BWI Eagle AIR-EAGLE SR Product information bulletin

AMIMON

AMIMON AMN12310 WHDI datasheet

Dual

Dual DMCPA79BT Installation & owner's manual

Sound Associates

Sound Associates SA652P Operation manual

Sherwood

Sherwood NewCastle R-772 Service manual

Audio

Audio A10-RX Series user guide

AllSee

AllSee PushShare PSRV1.1 user manual

DEMAG

DEMAG DRC-DR D2 operating instructions

Teleco

Teleco TVRCL868A02 manual

Bosch

Bosch RF3222E installation instructions

Kramer

Kramer 631R user manual

Xpress

Xpress xmc10 installation guide

JVC

JVC KD-MR1BTS instruction manual

Omega Engineering

Omega Engineering UWTC-REC3 user guide

e-survey

e-survey E300 Pro user manual