PREPARATION
Check care labels inside the garments.
CARE LABELS YOU MAY FIND ON YOUR FABRICS
Do not tumble dry woollen or wool mixture articles unless the article is labelled as being suitable .This
should avoid shrinkage.
Place delicate articles, e.g.tights, scarves, inside a pillowcase.
To avoid the need to iron easycare polyester/cotton items it is better to only dry small loads (i.e. half fill
drum) It is better to dry small and large articles together.
Fabric softeners, or similar products, should be used as specified by the fabric softener instructions. Do
not overload the dryer or dry large bulky items such as duvets or sleeping bags as it is important that the
airflow through the dryer is not obstructed.
Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot
removers, turpentine, waxes and wax removers should be washed in hot water with an extra amount of
detergent before being dried in the tumble dryer.
Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber backed articles and
clothes or pillows fitted with foam rubber pads should not be dried in the tumble dryer.
OPERATION
Open the door.
Load clothes loosely into the drum.
Load sheets first, starting with one corner.
Close the door.
Dry your hands.
Plug in the machine.
Choose the final dryness level.
Select the required heat setting.
Select the required energy setting and press start.
The drum will rotate in an anticlockwise direction, with the drying status light (if fitted) flashing once.
The drum will now begin to rotate clockwise and will stop automatically when your clothes are dry.
The drum will stop and rotate in the other direction for a short while every few minutes.
If a load is checked mid cycle restart the appliance by, closing the door and pressing the start button.
When drying large items such as sheets, we suggest you periodically stop the dryer to redistribute the
load.
When drying mixed loads, the dryer may stop when the lighter items are dry. These should be removed
and the dryer restarted to allow the heavier items to continue drying. There is an automatic 12 minute cool
down period at the end of every cycle, during which the heater is switched off. This helps to minimise
creasing.
