CompAir A TX Series User manual
Adsorption dryer
A190-930TX
Operating Instructions
Revision 03—2006/EN
Declaration of Conformity
COMPAIR Drucklufttechnik GmbH
Argenthaler Straße 11
55469 Simmern / Hunsrück
Germany
hereby declares with sole responsibility, that the products
compressed air adsorption dryer
series A190TX–A930TX
assembly type: assembly acc. to Art. 3 No. 2.2,
which this declaration refers to, conform to Directive 97/23/EC and were
subjected to a conformity assessment according to Annex III Modules B + D (for
assembly assessment).
For the assembly, the EC type approval certificate SIG 0271665/2 by Lloyd’s
Register Quality Assurance GmbH, Hamburg, is available.
The quality assurance system is monitored by the service provider stated below
Lloyd’s Register Quality Assurance GmbH (identification number 0525)
Mönckebergstraße 27, D - 20095 Hamburg.
The assembly consists of pressure appliances according to the classification list
(attached to the technical documentation provided by the manufacturer).
The following standards / technical specifications were used:
harmonized standards: DIN EN 292-1, DIN EN 292-2, DIN EN 1050,
DIN EN 50081, DIN EN 50082, DIN EN 60204
The following other EC directives were used:
98/37/EC
89/336/EEC
73/23/EEC
Signature
Stefan Pilath
Quality Manager
Machine passport
Type designation A____TX
Order no.
Project no.
Serial no.
Vessel no.
Vessel no.
Year of manufacture 2009
Issue date of these operating instructions 2009-02 EN
It is the responsibility of the owner,
to enter for the first time any appliance data not stated above,
to keep these appliance data up to date.
The above-stated appliance data provide for a clear identification of the dryer and
its components, and significantly facilitate any service measures.
Further important data on the dryer such as the details on the permissible
operating pressure and the electrical connection are found on the type plate (for
position of the type plate see page 9).
A190-930TX_EN_03_2009-02-06
Table of contents
General information ............................................................................................6
Manufacturer's details ..............................................................................................................6
Details on the dryer ..................................................................................................................7
About these operating instructions...........................................................................................8
For your own safety ............................................................................................9
Signs, instruction plates and danger zones at the dryer ..........................................................9
Intended use of the dryer .......................................................................................................11
General safety notes ..............................................................................................................11
Safety notes on specific operating phases.............................................................................12
Technical product description......................................................................... 15
Summary drawing ..................................................................................................................15
Function description ...............................................................................................................16
Available options ....................................................................................................................18
Transportation, installation and storage.........................................................21
Information on transportation packaging ................................................................................ 21
What to do in the case of transport damage occurring?......................................................... 21
Transporting and installing the dryer ...................................................................................... 22
Anchoring the dryer ................................................................................................................24
Storing the dryer.....................................................................................................................24
Installation..........................................................................................................26
Preconditions for installation ..................................................................................................26
Connect piping ....................................................................................................................... 26
Installing the electrical connection.......................................................................................... 27
Start-up............................................................................................................... 30
Requirements for initial start-up ............................................................................................. 30
Setting times of the operating phases .................................................................................... 31
Overview of operating and control elements .......................................................................... 31
Emergency shutdown.............................................................................................................34
Start up dryer..........................................................................................................................34
Changing cycle mode (optional).............................................................................................36
Monitoring dryer operation...............................................................................38
With dewpoint-sensing control (optional) ............................................................................... 38
Shutdown and restart dryer..............................................................................39
Emergency shutdown.............................................................................................................39
A190-930TX_EN_03_2009-02-06
Depressurising and shutting down the dryer ..........................................................................39
If work is to be carried out on the electrical system................................................................40
Restart ....................................................................................................................................40
Maintenance and repair of the dryer................................................................42
Notes on maintenance............................................................................................................42
Regular maintenance intervals ...............................................................................................43
Instructions for use of the dongle............................................................................................44
Daily maintenance tasks.........................................................................................................44
Weekly maintenance tasks.....................................................................................................45
Monthly maintenance tasks ....................................................................................................45
Maintenance work to be completed every 12 months ............................................................46
Maintenance work to be completed every 24 months ............................................................48
Maintenance work to be completed every 48 months ............................................................50
Identify and eliminate faults .............................................................................54
Summary of faults...................................................................................................................54
Index ...................................................................................................................58
Annex with technical documentation..............................................................61
Technical data ........................................................................................................................62
Replacement and wear parts list ............................................................................................63
Logic control diagram .............................................................................................................64
Flow diagram ..........................................................................................................................66
Dimensional drawings.............................................................................................................67
Manufacturer's details
6 A190-930TX_EN_03_ 2009-02-06
General information
Manufacturer's details
Name and address
COMPAIR Drucklufttechnik GmbH
Argenthaler Straße 11
55469 Simmern / Hunsrück
Germany
Telephone: +49 (0)6761 832 0
Telefax: +49 (0)6761 832 409
Internet: www.compair.com
Service and spare part order
You can also use these telephone numbers to order consumables such as
drying agents etc. as well as replacement parts. When ordering replacement
parts, always state the type and serial no. of the dryer. Both are shown on the
type plate attached to the control cabinet of the dryer.
General information
A190-930TX_EN_03_ 2009-02-06 7
Details on the dryer
Standard equipment
Dryer, comprising
2 vessels, filled with desiccant
Piping and muffler
Control system
Associated documents
Operating instructions (present)
Technical documentation (see annex)
Circuit diagrams (see separate document)
Warranty notes
In the following cases, the warranty shall be void:
If aggressive media in the compressed air and in the environment cause
corrosion damage and functional faults on the dryer.
If the dryer is used without prior approval and confirmation in writing by the
manufacturer for purposes other than those specified in these operating
instructions or contractually agreed.
If preset parameters (e. g. on the control system etc.) are changed without
prior approval and confirmation in writing by the manufacturer.
If the dryer is transported or stored incorrectly.
If the dryer is sited and installed incorrectly.
If the dryer is repaired or maintained incorrectly.
If the dryer is operated by personnel that does not have the requisite
qualifications.
If modifications are carried out on the dryer, the manufacturer did not
approve that.
In the event of non-compliance the manufacturer will not accept any liability for
any consequential damage whatsoever.
About these operating instructions
8 A190-930TX_EN_03_ 2009-02-06
About these operating instructions
These operating instructions contain basic information on the safe useof the
dryer.
Characters and symbols used
►Work steps that you have to carry out in the sequence stated are marked by
black triangles.
Lists are marked by a small box.
Note:
These notes provide you with hints and information on the safe and
efficient handling of machines and devices.
Warning!
These safety notes warn against damage to property and help you to
avoid such damage.
Danger!
These danger notes with a grey background warn against personal injury
and/or danger to life and limb; danger notes help you to avoid serious or
life-threatening situations for yourself and/or third parties.
Target group of these operating instructions
These operating instructions are intended for all persons working on and using
the dryer. We assume that all such persons are specialist personnel, e.g. fitters
or electricians.
Operating instructions: handling
These operating instructions must be continuously available at the site where the
dryer is used. We recommend to prepare a copy and to keep the same in a safe
and freely accessible place next to the dryer. Keep the original document in a
safe place.
For your own safety
A190-930TX_EN_03_ 2009-02-06 9
For your own safety
The dryer has been built in accordance with the state of the art and the
recognized technical safety regulations. Nevertheless, there is a risk of personal
injury and damage to property when the dryer is used, if
it is operated by non-qualified personnel,
not used within its intended design specifications,
is repaired or maintained incorrectly.
Note:
For your own safety and to prevent machine damage, please note the
information and safety notes in these operating instructions when
working with the dryer.
Signs, instruction plates and danger zones at the dryer
Signs and instructions
Vessel plate Vessel plate
Type plate of the dryer
Front view
Please note the above plates and instructions attached to the dryer. Ensure that
they are not removed and are always readable.
Signs, instruction plates and danger zones at the dryer
10 A190-930TX_EN_03_ 2009-02-06
Hazard areas on the dryer
Hazard caused by electrical voltage
Hazard caused by overpressure
Hazard caused by sudden air ejection during
expansion
Hazard area
Symbol in
operating
instructions
Warning against hazardous electrical voltage
Different parts of the dryer carry electrical current. These parts may be
connected, opened, and maintained by authorized specialist personnel only.
Warning against overpressure
The entire dryer is under pressure. Before commencing any work, the plant
must be depressurised.
Warning against sudden air ejection
When the vessels are depressurised, air flows suddenly out of the sound
absorber:
This causes a sudden loud cracking noise.
Due to particles carried in the air flow, there is a very considerable risk of
eye injury.
When working on the dryer, always wear eye and ear protection equipment.
Skid risk
When emptying and filling the vessels with drying agent, there is a risk of
skidding caused by spilt drying agent.
This manual suits for next models
8
Table of contents
Popular Dryer manuals by other brands
Bosch
Bosch WTA79200GB Installation and operating instructions
Amana
Amana W10233410A Use and care guide
Miele
Miele TWH 780 WP operating instructions
Asko
Asko T760 user guide
Alliance Laundry Systems
Alliance Laundry Systems 25 Series Original instructions
Bosch
Bosch Logixx 10 WTB76556GB Instruction manual and installation instructions
Indesit
Indesit IDV 75 instruction manual
Infiniton
Infiniton SD-DG85C manual
BOMANN
BOMANN WT 5019 instruction manual
Alliance Laundry Systems
Alliance Laundry Systems TMB795C Installation
Asko
Asko T793C operating instructions
Kenmore
Kenmore 8041 - 5.8 cu. Ft. Capacity Electric Dryer installation instructions