Commell FS-97D User manual

FS-97D

User’s Manual

Edition: 1.1

2009/03/16

FS-97DUser’sManual

reserved. The information in this document is subject to change without prior notice to make

improvements to the products.

This document contains proprietary information and protected by copyright. No part of this

document may be reproduced, copied, or translated in any form or any means without prior

written permission of the manufacturer.

All trademarks and/or registered trademarks contains in this document are property of their

respective owners. Disclaimer

The company shall not be liable for any incidental or consequential damages resulting from

the performance or use of this product.

The company does not issue a warranty of any kind, express or implied, including without

limitation implied warranties of merchantability or fitness for a particular purpose.

The company has the right to revise the manual or include changes in the specifications of

the product described within it at any time without notice and without obligation to notify any

person of such revision or changes.

Trademark

All trademarks are the property of their respective holders.

Any questions please visit our website at TUhttp://www.commell.com.twUT.

FS-97DUser’sManual

Packing List

Please check package component before you use our products.

Hardware:

FS-97D Full-Size CPU card x 1

Cable Kit:

4-pin to 3-pin ATX cable x 1

PS/2 Keyboard & Mouse Cable x 1

SATA Cable x 2

Floppy flat cable x 1

Audio Port Cable x 1

DVI module with bracket x 1

(FS-97DDG Only)

COM Port Cable x 1

(FS-97DDG2/XG2 Only)

Printer Port Cable x 1

(FS-97DDG2/XG2 Only)

USB Cable x 2

DVI module with bracket x 1

(FS-97DDG2/D2G2 Only)

FS-97DUser’sManual

Other Accessories:

Divers CD (including User’s Manual) x 1

RAID drivers Disc for Windows 2000, Windows XP and Windows Server 2003

Comport Printer Cable x 1

(FS-97DXG & FS-97DG Only)

Comport Cable x 1

(FS-97DDG2 FS-97DXG2 FS-97DD2G2 Only)

FS-97DUser’sManual

Index

Chapter1 <Introduction>............................................................8

1.1 <Product Overview> ......................................................................8

1.2 <Product Specification>.................................................................9

1.3 <Block Diagram>.........................................................................11

1.4 <Mechanical Drawing >...............................................................12

Chapter 2 <Hardware Setup>.................................................13

2.1 <Connector Location>..................................................................13

2.2 <Jumper Reference>.....................................................................14

2.3 <Connector Reference>................................................................15

2.3.1 <Internal Connectors> ..............................................................15

2.3.2 <External Connectors> .............................................................15

2.4 <CPU and Memory Setup>..........................................................16

2.4.1 <CPU installation>...................................................................16

2.4.2 <Memory installation>..............................................................17

2.5 <CMOS Setup>............................................................................18

2.6 <Serial ATA installation> .............................................................19

2.7 <LAN Interface>..........................................................................20

2.8 <Onboard Display Interface>.......................................................21

2.8.1 <Analog Display>....................................................................21

2.8.2 <LVDS Display FS-97DXG＆XG2 Only >...................................22

2.8.3 <DVI Display FS-97DDG/ DG2 Only >.......................................26

2.9 <Audio Installation>.....................................................................27

2.11 <GPIO interface> .......................................................................29

2.12 <USB2.0 Interface>....................................................................30

2.13 <Power and Fan Installation>.....................................................31

2.14 <Serial Port>...............................................................................33

2.15 <Switch and Indicator>..............................................................35

FS-97DUser’sManual

Chapter 3 <System Configuration>.......................................37

3.1 <SATA configuration>..................................................................37

3.2 <SATARAID Configuration>......................................................38

3.3 <Audio Configuration>................................................................43

3.4 <Video Memory Setup>...............................................................44

3.5 <Display Properties Setting>........................................................46

Chapter 4 <BIOS Setup>.........................................................48

Appendix A <I/O Port Pin Assignment>................................50

A.1 <Serial ATA Port>........................................................................50

A.2 <IrDA Port>.................................................................................50

A.3 <VGA Port>.................................................................................50

A.4 <LAN Port>.................................................................................51

A.5 <Floppy Port>..............................................................................51

A.6 <Parallel Port>.............................................................................52

Appedix B <System Resources>...........................................53

Appedix C <Flash BIOS>.........................................................56

C.1 <BIOS Auto Flash Tool>.............................................................56

C.2 <Flash Method>...........................................................................56

Appendix D <Programming GPIO’s>....................................57

Appendix E <Watch Dog timer Setting >..............................58

Contact Information...................................................................59

FS-97DUser’sManual

(This Page is Left for Blank)

FS-97D User’s Manual Introduction

Product Specification8

Chapter1 <Introduction>

1.1 <Product Overview>

FS-97D is the Full-size single board computer with last Intel desktop technology with

PICMG form factor. Based on Intel®Q35 and ICH9DO, the board integrates a new Core 2

Quad/Duo/Celeron processor 775-pin socket, DDR2 memory socket, Intel®Graphic Media

Accelerator 3100 technology, Serial ATA II with RAID function for a powerful desktop

system.

Intel®LGA775 processor

The Intel®Core 2 Quad/Duo processor now comes with a new form factor with 775-pin LGA

package, for 800/1066/1333MHz front-side-bus, 12MB L2 cache, and for 65nm, 45nm

manufacturing technology, the LGA processor without pin header on solder side can make

user installing the processor on the socket easier.

Intel®Q35 and ICH9DO chipset

The Intel Q35 integrates DDR2 667/800MHz for memory, and Graphic Media Accelerator

(GMA) 3100 technology for new graphic engine. It can provide up to 384MB of frame buffer

when you install over 1GB of system memory. The ICH9DO integrates with up to 8 USB2.0

interfaces, and serial ATA II interface with RAID function.

Flexible Extension Interface

The board provides one mini-PCI socket.

FS-97D User’s Manual Introduction

Product Overview 9

1.2 <Product Specification>

General Specification

Form Factor Full-size PICMG 1.0 CPU card

CPU Intel® Core 2 Quad/Duo Celeron processor with LGA775 socket

Package type: LGA 775

Front side bus: 800/1066/1333MHz

Support Intel®Hyper-Threading Technology and Quad/Dual core

Memory 2 x 240-pin DDR2 667/800MHz SDRAM up to 4GB

Unbufferred, none-ECC memory supported only

Chipset Intel® Q35 (Northbridge) and ICH9DO (Southbridge)

BIOS Phoenix-Award v6.00PG 8Mb SPI flash BIOS

Green

Function Power saving mode includes doze, standby and suspend modes.

ACPI version 1.0 and APM version 1.2 compliant

Watchdog

Timer System reset programmable watchdog timer with 1 ~ 255sec./min. of

timeout value

Real Time

Clock Intel® ICH9DO built-in RTC with lithium battery

Serial ATAII Intel® ICH9DO integrates 6 Serial ATA II interface

RAID 0, 1,5,10 Intel Matrix Storage Technology supported

Multi-I/O Port

Chipset Intel® 82801IO ( ICH9DO) with Winbond® W83627DHG controller

Serial Port One RS-232 and one RS232/422/485 serial ports

USB Port Eight Hi-Speed USB 2.0 ports with 480Mbps of transfer rate

Parallel Port One internal bi-direction parallel port with SPP/ECP/EPP mode

Floppy Port One internal Floppy port

IrDA Port One IrDA compliant Infrared interface supports SIR

K/B & Mouse External PS/2 keyboard and mouse port on bracket

GPIO One 12-pin Digital I/O connector with 8-bit programmable I/O

interface

Smart Fan One CPU fan connector for fan speed controllable

VGA Display Interface

Chipset Intel® Q35 GMA3100 (Graphic Memory Controller Hub)

Frame Buffer Up to 384MB shared with system memory

Display Type CRT, LCD monitor with analog display

Onboard 18/24-bit dual channel LVDS interface (FS-97DXG/ XG2

Only)

Onboard DVI interface (FS-97DDG / DG2 Only)

Connector External DB15 female connector on bracket

Onboard 40-pin LVDS connector(FS-97DXG/ XG2 Only)

Onboard 26-pin DVI Connector (FS-97DDG / DG2 Only)

FS-97D User’s Manual Introduction

Product Specification10

Ethernet Interface

Controller One or two Intel 82573L Gigabit Ethernet controller

Type Triple speed 10/100/1000Base-T

Auto-switching Fast Ethernet

Full duplex, IEEE802.3U compliant

Connector Two External LAN connectors with LED on bracket

Audio Interface

Chipset Intel® ICH9DO with Realtek ALC888 HD Audio

Intel High Definition Audio compliance

Interface 2 channels sound output

Connector Internal 10-pin header for line-in/-out, MIC-in, 4-pin header for CD-IN

Expansive Interface

Mini PCI One Mini-PCI socket TYPE III A (32-bit, 33MHz)

Power supply: +3.3V, +5V, 3VSB

Power and Environment

Power

Requirement +5V, +12 DC input & 5VSB Requirement

Dimension 338 (L) x 122 (H) mm

Temperature Operating within 0 ~ 60℃(32 ~ 140℉)

Storage within -20 ~ 85℃(-4 ~ 185℉)

Ordering Code

FS-97DDG Onboard VGA, Mini-PCI, 6 x SATA, HD Audio, 1 X IrDA 8 x USB,

Serial port, LPT, GPIO, FDD, DVI, Gigabit LAN

FS-97DXG Onboard VGA, Mini-PCI, 6 x SATA, HD Audio, 1 X IrDA, 8 x USB,

Serial port, LPT, GPIO, FDD, LVDS, Gigabit LAN

FS-97DDG2 Onboard VGA, Mini-PCI, 6 x SATA, HD Audio, 1 X IrDA,, 8 x USB, 2

x Serial port, LPT, GPIO, FDD DVI, 2 x Gigabit LAN

FS-97DXG2 Onboard VGA,, Mini-PCI, 6 x SATA, HD Audio, 1 X IrDA, , 8 x USB, 2

x Serial port, LPT, GPIO, FDD, LVDS , 2 x Gigabit LAN

The specifications may be different as the actual production.

For further product information please visit the website at TUhttp://www.commell.com.twUT

Table of contents

Popular Motherboard manuals by other brands

DFI

DFI SD170 user manual

ASROCK

ASROCK ROMED8-2T user manual

Asus

Asus P2L97A user manual

Winmate

Winmate IC70 user manual

Asus

Asus MES-B user manual

Grantech

Grantech SYS8F377VGGA-3OMN user manual

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR user guide

Gigabyte

Gigabyte GA-9IVDT user manual

Texas Instruments

Texas Instruments ADS8372EVM user guide

IBT Technologies

IBT Technologies MB860 user manual

Nvidia

Nvidia TEGRA DG-04927-001_V01 user guide

Biostar

Biostar M7VIT Bravo Description

Intel

Intel D33217CK specification

Asus

Asus F1A55-M LX PLUS R2.0 user manual

EPC

EPC EPC9147C quick start guide

Asus

Asus EX-B760M-V5 D4 quick start guide

EPOX

EPOX MU-8KHA0010 user manual

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 user guide