Comeup DV-18 User manual

This manual suits for next models

2

Popular Winch manuals by other brands

WARRIOR

WARRIOR Trojan 40PUS12 Assembly & operating instructions

SVERO

SVERO 16 User instructions

Warrior Winches

Warrior Winches C10000NH owner's manual

Badland Winches

Badland Winches 68146 Installation and operating instructions

Bush

Bush II Series quick start guide

Badland

Badland APEX 5500 user manual

Quadratec

Quadratec Q9000 Synthetic Operator's guide

C-Max

C-Max VIGO Installation & operation manual

Orvea

Orvea Italwinch 805 Installation and user manual

Prowinch

Prowinch PWJTHF300 user manual

Clas Ohlson

Clas Ohlson LD2000-A manual

Topex

Topex 97X080 Instructions for use

Eastbound

Eastbound MotoWinch 1707001 operating instructions

Runva

Runva EWD8000 Assembly & operating instructions

Ingersoll-Rand

Ingersoll-Rand LIFTSTAR FG 1500/CN Series Parts, operation and maintenance manual

Granit

Granit 11157675 operating instructions

TREX

TREX TB75 user manual

Badland

Badland ZXR 2500 user manual

Self-Recovery Winch

Model: D

V

-

18

PN: 851838 24V DC

851823 12V DC

Introduction

Feature

Line pull: 8,181 kg / 18,000 lb wire rope first layer

Wire rope: 12.7 mm × 25 m (1/2" × 82′) 6 × 29 - IWRC

Brake: Patented cone brake holds full load

Clutch: Turn the T-handle for rapid wire rope payout

Control: Handheld pendant switch powers the winch

Unpacking

．Winch assembly……………………………………………………… 1

p

c

．Detachable control box……………………………………………… 1

p

c

．Remote control………………………………………………………. 1 pc

．Wire rope with clevis hook………….………………………………. 1 pc

．Roller fairlead………………………………………………………… 1 pc

．1.8 m ( 6′) 2 gauge battery lead…………………………………… 1 pc

Read this manual carefully

You should carefully read and understand this manual before operating it.

Careless winch operation may result in personal injury hazards or property

damage.

Installation

Before using the winch, make sure all electrical components have no

corrosion or damaged; the environment should be clear and dry.

Winch and roller fairlead mountings

．

It is very important that the winch will be mounted

on a flat and hard surface of mounting channel

in order to make sure the motor, drum and

gearbox housing are aligned correctly.

．Roller Fairlead does not mount to the winch

directly.

．The wire rope shall be wound in an under-wound orientation only.

．

Eight (8) M12 x 1.75 pitch 8.8 grade high tensile steel bolts must be used in

order to sustain the loads imposed on the winch mounting.

．Two (2) M12 x 1.75 pitch 8.8 grade high tensile steel bolts must be used for

fastening the roller fairlead into the mounting channel.

Wiring Diagram

Attach the black lead firmly to the negative (–)battery terminal and red lead

to the positive (+) battery terminal. The voltage drop for the winch motor

must not exceed 10% of the nominal voltage of 12/24V DC.

Nut fastening for motor & contactor

1.Holding the lower nut on the stub and fastening the upper nut clockwise.

2.The torque setting for nut is 14 N-m/124 lb-in.

Warning

．The winch is not intended to be used in any manner for the movement or

lifting of personnel.

．The rated line pull shown is based on the first layer of rope on the drum.

．The rope winding on the drum shall remain 5 wraps from the drum.

Parts List

Item No. Description Part No. Qty

1 Motor 24V 881927 1

Motor 12V 882502

2 Tie bar kit 880045 3

3 Motor support rack 880046 1

4 Motor coupling 880047 1

5 Drum bushing 880048 2

6 Drum kit 881928 1

7 Gearbox support rack 880050 1

8 Grounding lead 880009 1

9 Wire rope 881929 1

10 1s

t

shaft 881930 1

11 3r

d

ring gear kit 880054 1

12 3r

d

stage carrier 881944 1

13 2n

d

stage carrier 881943 1

14 1s

t

stage carrier 880107 1

15 Retaining ring 880058 1

16 1s

t

& 2n

d

ring gear 880059 1

17 1s

t

pinion 880060 1

18 Clutch kit 880061 1

19 Gear box kit 880062 1

20 Brake base 880063 1

21 Cone brake disc kit 880021 1

22 Brake cover kit 880065 1

23 Roller fairlead 880066 1

24 Mounting hardware 880067 1

25 Remote control 880126 1

26 Handsaver strap 880026 1

27 Control box 12V 881164

Control box 24V 881165 1

27-1 Remote socket kit 12V 881373

Remote socket kit 24V 881374 1

27-2 Control pack 12V 881400

Control pack 24V 881401 1

28 Brake clutch base 881434 1

29 Clevis hook 881996 1

Winch Assembly