Clover WW2000 User manual
I. Receiver (WW3000R)
1. Components
① Channel /Scanning Selection Button
② Power Button
③ Channel Indicator Lamp
④ Scanning Interval Time Indicator Lamp
⑤ Scanning Indicator Lamp
⑥ Infrared Emitting Window
⑦ Rectangle Antenna
⑧ Pull-shaft Antenna
⑨ IR Jack
⑩ Audio Left Output Jack
○
11 Video Output Jack
○
12 Audio Right Output Jack
○
13 Power Input Jack
○
14 Power Indicator Lamp
○
15 Infrared Emitting Window
Re a r
Front
Remote Controlle
r
II. Transmitter --- Camera (WW2000)
1. Component
① Power Button
② Focus Adjustor
③ Camera Lens
④ Infrared Emitting Tube
⑤ Indicator Lamp
6.Crophone
7. RectangleAntenna
8. Input Jack of Power DC 12V
9. Channel Selector
1) Use the pin of power line with adaptor to insert into the jack ⑧, and plug the power
supply to connect the camera.
2) Press the Button ①to open the power then the indicator lamp ⑤will be bright.
3) Adjust the Channel Selector ⑨to the corresponding channel of monitor.
4) If the monitor is working, it will display the picture which camera was taken.
5) Adjust the Focus Adjustor ②to get the clearest image (when first time do it, then
afterward do not need to re-adjust it).
6) Place the camera in the far site, and synchronously adjust its antenna ⑦and monitorˊs
to get the clearest image.
7) You can also adjust the direction and the up-angle of camera when you need.
1) Connect the Video Output Jack ○
11 and Audio Output Jack ○
10 /○
12 to the Input jack of displaying
equipment (e.g. TV set, LCD, Overhead Projector, and Multimedia Computer, etc.) by an AV
signal line. Audio signal (L & R) can be singly connect to Stereo Device. Pull up the 2.4G
Rectangle Antenna ○
7, connect the power supply by a power line with adapter, and after press
down the Power Button ○
2, there will be appear a wonderful picture on screen, issue a pleasant
sound from the louder speaker.
2) If there is two-sets unit work on the same place, for erasing the interference from same channel,
you can respectively adjust the camera’s channel and press scanning button ○
1to difference
channel from another (Please note the Transmitter and Receiver must being wok in the same
channel). Carefully adjust the rectangle Antenna ○
7of both units can get the best receiving
effect.
This manual suits for next models
1
Table of contents
Other Clover Security Camera manuals
Clover
Clover HDC560 User manual
Clover
Clover HDC518 User manual
Clover
Clover DB350 User manual
Clover
Clover HDC238 User manual
Clover
Clover OC315 User manual
Clover
Clover HDC501 User manual
Clover
Clover CC5301 User manual
Clover
Clover HDC560 User manual
Clover
Clover HDC577 User manual
Clover
Clover CM105H User manual
Clover
Clover HDC100 User manual
Clover
Clover CCM630 User manual
Clover
Clover DC534 User manual
Clover
Clover WW8000 User manual
Clover
Clover OC990 User manual
Clover
Clover OC295 User manual
Clover
Clover HDC518 User manual
Clover
Clover HDC041 User manual
Clover
Clover CM800 User manual
Clover
Clover RD5354 User manual
