Clover WW2000 User manual
Transmitter --- Camera (WW2000)
Component
1.Power Button
2.Focus Adjustor
3.Camera Lens
4.Infrared Emitting Tube
5.Indicator Lamp
6.Crophone
7.Rectangle Antenna
8.Input Jack of Power DC 12V
9.Channel Selector
1) Use the pin of power line with adaptor to insert into the jack ⑧, and plug the power
supply to connect the camera.
2) Press the Button ①to open the power then the indicator lamp ⑤will be bright.
3) Adjust the Channel Selector ⑨to the corresponding channel of monitor.
4) If the monitor is working, it will display the picture which camera was taken.
5) Adjust the Focus Adjustor ②to get the clearest image (when first time do it, then
afterward do not need to re-adjust it).
6) Place the camera in the far site, and synchronously adjust its antenna ⑦and monitorˊs
to get the clearest image.
7) You can also adjust the direction and the up-angle of camera when you need.
Table of contents
Other Clover Security Camera manuals
Clover
Clover CW5700TX User manual
Clover
Clover HDC501 User manual
Clover
Clover C2724 User manual
Clover
Clover HDC365 User manual
Clover
Clover HDC150 User manual
Clover
Clover OC275 User manual
Clover
Clover OW0702 User manual
Clover
Clover DC534 User manual
Clover
Clover HDC560 User manual
Clover
Clover OC315 User manual
Clover
Clover HDC500 User manual
Clover
Clover RJ325 User manual
Clover
Clover WW2000 User manual
Clover
Clover HDC238 User manual
Clover
Clover USB01PT User manual
Clover
Clover ZEC470 User manual
Clover
Clover HDC577 User manual
Clover
Clover HDC211 User manual
Clover
Clover C1704DVR User manual
Clover
Clover HDC560 User manual
