Clear-Com DX410 User manual

Quick Reference Guide

DX410

1. Channel A (Intercom 1) button - Includes 2-wire

and 4-wire connections

2. ISO (Isolate) button - To All Wireless Headsets

and Belt Packs, Base, ISO Relay and AUX OUT

(if activated)

3. Increase Volume button (˄)

4. Decrease Volume button (˅)

5. Channel B (Intercom 2) button - Includes 2-wire

and 4-wire connections

6. Power/Mode lights

7. Microphone

8. Power button (On/Off)

9. Battery

10. Battery-release latch

1. Battery

2. Increase Volume button (▲)

3. Decrease Volume button (▼)

4. PWR (Power) button

5. Headset cable connector

6. Battery-release latch

7. Power/Mode lights

8. Channel A (Intercom 1) button - Includes 2-wire

and 4-wire connections

9. ISO (Isolate) button - To All Wireless Headsets

and Belt Packs, Base, ISO Relay and AUX OUT

(if activated)

10. Channel B (Intercom 2) button - Includes 2-wire

and 4-wire connections

1 2

4 7

All-In-One Headset Belt Pack

7 78 9 10

21 64 3 5

Settings & Adjustments

All-In-One Headset Lights Off:

• Make certain the headset power is Off.

• Press and hold the B button while pressing and releasing the Power button.

Note: "Lights Off" is temporary. Lights return when power is cycled.

Belt Pack Sidetone Adjustment:

• Press and hold the A button while you repeatedly press up (▲) to increase or press down (▼) to decrease audio levels.

For technical support

In The Americas and Asia – Tel: +1.510.337.6600 or 1.800.462.4357 Menu option 1 • Hours: 8:00am-5:00pm Pacic Time • Email: [email protected]

In Europe, Middle East and Africa – Tel: +44.1223.815000 • Hours: 8:00am-5:00pm GMT • Email: [email protected]

Part Number: 399G164 Rev A

Date: 12/4/15

Clear-Com, the Clear-Com logo and Clear-Com Concert are trademarks or registered trademarks of HM Electronics, Inc.

Quick Reference Guide

DX410

Power Switch

STATUS AUTO NULLREG

COMMUNICATOR®

Registration

Audio Channel and

Auto-Null Controls

Local Headset

Controls

• Make certain the Belt Pack or Headset is turned Off.

• Press REG button on base station.

– STATUS display on the base station shows “o” for registration mode.

• On the Belt Pack and Headset, press and hold ISO while pressing POWER and then release all buttons.

– The power lights blink red, then green and then turn off. One power light remains green.

– The registration number will appear on the base station STATUS display.

AUTO NULL Adjustment (only if using 2-wire interface)

If echo is heard in wireless Belt Packs or All-In-One Headsets on A or B:

• Use pointed object (e.g. pen) to press and hold the A or B AUTO NULL button for 2 seconds.

CAUTION: Before pressing an AUTO NULL button, be certain there are no open microphones on the wired

system. Notify wired system users that a loud noise may occur in their headsets during the auto null adjustment.

The system may be out of operation for approximately 50 seconds during this adjustment.

Local Headset Communication

• SEL button selects communication with A, Bor ISO.

– A, Bor ISO lights indicate selection.

• TALK button

– Press and release quickly to “latch on” for open communication.

– Press and hold while talking for momentary communication – release when nished.

• VOLUME control adjusts the audio level in local headset ear piece.

• MIC LEVEL control adjusts the audio level going out from local headset microphone.

Table of contents

Other Clear-Com Intercom System manuals

Clear-Com

Clear-Com RS-700 Series User manual

Clear-Com

Clear-Com EclipseHX User manual

Clear-Com

Clear-Com FreeSpeak II User manual

Clear-Com

Clear-Com WBS User manual

Clear-Com

Clear-Com HBP-2X Quick start guide

Clear-Com

Clear-Com Eclipse Median User manual

Clear-Com

Clear-Com MS-222 User manual

Clear-Com

Clear-Com HelixNet Partyline User manual

Clear-Com

Clear-Com Eclipse HX series User manual

Clear-Com

Clear-Com ENCORE MS-702 User manual

Clear-Com

Clear-Com FreeSpeak Edge User manual

Clear-Com

Clear-Com ICS-102 User manual

Clear-Com

Clear-Com Eclipse ICS 1016E User manual

Clear-Com

Clear-Com LQ series User manual

Clear-Com

Clear-Com Tempest 2400 MasterBelt User manual

Clear-Com

Clear-Com HME DX210 User manual

Clear-Com

Clear-Com TEMPEST 2400 User manual

Clear-Com

Clear-Com RM-220 Troubleshooting guide

Clear-Com

Clear-Com WBS-670 User manual

Clear-Com

Clear-Com Encore User manual

Clear-Com

Clear-Com TEMPEST 2400 User manual

Clear-Com

Clear-Com RS-201 Troubleshooting guide

Clear-Com

Clear-Com ECLIPSE-32 MATRIX User manual

Clear-Com

Clear-Com RS-602 User manual

Popular Intercom System manuals by other brands

Bticino

Bticino LINEA 3000 Installation

MSI

MSI MSI-140 owner's manual

golmar

golmar Stadio Plus instruction manual

CyberData

CyberData 011211 series Installation quick reference

Vidos

Vidos duo M1021 user manual

Vimar

Vimar ELVOX 7539/E Installation and operation manual

SSS Siedle

SSS Siedle BTSV 850-03 operating instructions

Dahua

Dahua VTO Series quick start guide

Elvox

Elvox 5651 Wiring instructions

Videx

Videx VIDEOKIT Series owner's manual

Rocom

Rocom Doortello Business FW T2.05W2.04 user guide

Viking

Viking E-35-EWP product manual

Safeguard Supply

Safeguard Supply LRA-EX1000 user manual

SSS Siedle

SSS Siedle BFCV 850 Series operating instructions

GRD

GRD MAX V2 user manual

Alecto

Alecto ADI-250 user manual

Aiphone

Aiphone IE-8MD Installation & operation manual

Perel

Perel EDB4 user manual