Clear-Com FreeSpeak II User manual

FreeSpeak II™

Quick Start Guide for the stand-alone system

A FreeSpeak II (FS II) system consists of five main elements:

•Wireless beltpacks (FSII BP19)

•The Base station (FSII-BASE-19) that routes communication to and from the beltpacks and other

audio devices

•Antennas (FSII-TCVR-19) that provide custom coverage zones in which the beltpacks operate

•Optional antenna splitters (PD2203) that run up to 5 separate antennas.

•Suitable headsets such as the Clear-Com CC-300-X4

Note: For more information about the system see the FreeSpeak II User Guide.

1. Connecting the transceiver/antennas to the Base station

To connect the antennas to the Base station:

1) Using 4-pair shielded screened cable (CAT-5/5e/6) with RJ45 connectors, connect the antennas to the

Base station. Up to 5 antennas can be connected to each transceiver port using an antenna splitter, or

two antennas can be connected directly to the Base station. The Base station can power cable

lengths of up to 200m. Powering antennas or splitters individually can increase cable lengths to a

maximum of 1000m. See Wiring the antennas and splitters in the User Guide for more information.

2) When the transceiver/antennas are connected, turn on the Base station and wait for it to boot.

2. Using the Beltpacks

The system arrives with a default audio set-up and configuration so the system can simply be wired and

powered for basic use. The default set-up has two partyline (conference) audio channels (A & B). Each channel

talks to:

•All the beltpacks on that channel

•The wired partyline (see connectors above, PL CH-A and PL CHA-B)

•The head set on the Base station.

To customise an audio channel configuration please refer to the FreeSpeak II User Guide.

IEC power

connector

Transceiver/antenna ports

Wired partyline

connectors

1 399G106 Rev: B09/05/14

3. Enabling registration of beltpacks to the Base station

1) From the Base station menu, go to MAIN MENU ->SYSTEM ->REG ->START.Enable registration

mode has a two minute inactive time-out.

2) On the beltpack to be registered, hold down the menu key for 2 seconds, then enter SYSTEM

CONNECT using the rotary controllers and the C& Dkeys.

3) Select the system you want to pair to. The system will be visible (V) and in pairing mode (P).

4) Enter the four digit pairing code for the system using the rotary controllers and the menu select key

(D). The default is 0000.

5) Select an available role from the list displayed on the beltpack.

The Beltpack is now paired and ready for operation. To test, press and hold the channel A button while talking.

Others will hear you on channel A.

Battery

Compartment

Rotary control, audio

levels Channel A (also

menu navigation in

menu mode)

On/Off button (3

second press and

hold)

Rotary control, audio

levels Channel B (also

menu navigation in

menu mode)

Channel A Talk button

Channel A Call button (also

cancels menu selection

when in menu mode)

Beltpack information screen.

Also displays menu options

when in menu mode.

Channel B Talk

button

Channel B Call button (also

menu select when in menu

mode)

Menu button (2 second

press and hold)

Reply button

Menu display screen

Menu control. Push to

accesss menu or select

menu item. Turn to scroll

through menu items.

2 399G106 Rev: B09/05/14

Other manuals for FreeSpeak II

Other Clear-Com Intercom System manuals

Clear-Com

Clear-Com LQ-2W2 User manual

Clear-Com

Clear-Com Eclipse HX-PiCo User manual

Clear-Com

Clear-Com SB-704 User manual

Clear-Com

Clear-Com eclipse HX-Delta User manual

Clear-Com

Clear-Com HelixNet 2.1 User manual

Clear-Com

Clear-Com KB-702GM User manual

Clear-Com

Clear-Com KB-111A Troubleshooting guide

Clear-Com

Clear-Com Eclipse HX series User manual

Clear-Com

Clear-Com FreeSpeak II User manual

Clear-Com

Clear-Com Eclipse HX-Median User manual

Clear-Com

Clear-Com HelixNet Partyline User manual

Clear-Com

Clear-Com ECLIPSE MATRIX User manual

Clear-Com

Clear-Com WBS User manual

Clear-Com

Clear-Com Eclipse HX-Median User manual

Clear-Com

Clear-Com ECLIPSE ICS 92/52 User manual

Clear-Com

Clear-Com TEMPEST 2400 User manual

Clear-Com

Clear-Com EclipseHX Installation and operation manual

Clear-Com

Clear-Com HME DX210 User manual

Clear-Com

Clear-Com RS-700 Series User manual

Clear-Com

Clear-Com ECLIPSE-32 MATRIX User manual

Clear-Com

Clear-Com Eclipse ICS 1016E User manual

Clear-Com

Clear-Com Matrix Plus 3 User manual

Clear-Com

Clear-Com Eclipse Median User manual

Clear-Com

Clear-Com BP410 User manual

Popular Intercom System manuals by other brands

Bticino

Bticino LINEA 3000 Installation

MSI

MSI MSI-140 owner's manual

golmar

golmar Stadio Plus instruction manual

CyberData

CyberData 011211 series Installation quick reference

Vidos

Vidos duo M1021 user manual

Vimar

Vimar ELVOX 7539/E Installation and operation manual

SSS Siedle

SSS Siedle BTSV 850-03 operating instructions

Dahua

Dahua VTO Series quick start guide

Elvox

Elvox 5651 Wiring instructions

Videx

Videx VIDEOKIT Series owner's manual

Rocom

Rocom Doortello Business FW T2.05W2.04 user guide

Viking

Viking E-35-EWP product manual

Safeguard Supply

Safeguard Supply LRA-EX1000 user manual

SSS Siedle

SSS Siedle BFCV 850 Series operating instructions

GRD

GRD MAX V2 user manual

Alecto

Alecto ADI-250 user manual

Aiphone

Aiphone IE-8MD Installation & operation manual

Perel

Perel EDB4 user manual