Clear-Com FreeSpeak II User manual

Page 1399G106 Rev C 08/07/15

A FreeSpeak II (FS II) system consists of five main elements:

•Wireless beltpacks (FSII-BP-19, FSII-BP-24).

•The Base station (FSII-BASE) that routes communication to and from the beltpacks and

other audio devices.

•Antennas (FSII-TCVR-19, FSII-TCVR-24) that provide coverage zones in which the

beltpacks operate.

•Optional antenna splitters (PD2203) that run up to 5 separate antennas.

•Suitable headsets such as the Clear-Com CC-300-X4.

Connecting the transceiver/antennas to the Base station

To connect the antennas to the Base station:

1) Clear-Com recommends using 4-pair shielded screened cable (CAT-5/5e/6) with RJ45

connectors to connect the antennas to the Base station. Up to 5 antennas can be

connected to each transceiver port using an antenna splitter, or two antennas can be

connected directly to the Base station. The Base station can power cable lengths of up to

650 ft (200m). Powering antennas or splitters individually can increase cable lengths to a

maximum of 3280 ft (1000m). See 3.2.1 Wiring the antennas and splitters in the

User Guide for more information.

2) When the transceiver/antennas are connected, turn on the Base station and wait for it to

boot.

Using the Beltpacks

The system arrives with a default audio set-up and configuration so the system can simply be

wired and powered for basic use. The default set-up has two Wireless Partylines, WPL01 and

WPL02 for beltpack channel A and B respectively. Each channel talks to:

•All the beltpacks on that channel

•The head set on the Base station.

To customize an audio channel configuration please refer to the FreeSpeak II User Guide.

IEC power

connector Transceiver/antenna ports

Wired partyline

connectors

Quick

Start

Guide

FreeSpeak II™ Stand alone

Base station system

Quick Start Guide |FreeSpeak II™ stand alone system

Page 2399G106 Rev C 08/07/15

Enabling registration of beltpacks to the Base station

1) From the Base station menu, go to MAIN MENU ->SYSTEM ->REG ->START. Enable

registration mode has a two minute inactive time-out.

2) On the beltpack to be registered, hold down the menu key for 2 seconds, then enter

SYSTEM CONNECT using the rotary controllers and the C& Dkeys.

3) Select the system to pair to. The system will be visible (V) and in pairing mode (P).

4) Enter the four digit pairing code for the system using the rotary controllers and the menu

select key (D). The default is 0000.

5) Select an available role from the list displayed on the beltpack.

The beltpack is now paired and ready for operation. To test, press and hold the channel A button

while talking. Others will hear you on channel A.

Battery

Compartment

Rotary control, audio

levels Channel A (also

menu navigation in

menu mode)

On/Off button (3 second

press and hold)

Rotary control,

audio levels

Channel B (also

menu navigation in

menu mode)

Channel A

Talk button

Channel A Call button

(also cancels menu selection

when in menu mode)

Beltpack information

screen (also displays

menu options when in

menu mode

Channel B

Talk button

Channel B Call button

(also menu select when in menu mode)

Menu button (2 second

press and hold)Reply button

Menu display screen Menu control. Push to access menu or select

menu item. Turn to scroll through menu items.

Other manuals for FreeSpeak II

Table of contents

Other Clear-Com Intercom System manuals

Clear-Com

Clear-Com RS-700 Series User manual

Clear-Com

Clear-Com Tempest 900 User manual

Clear-Com

Clear-Com FreeSpeak II FSII-TCVR-24 User manual

Clear-Com

Clear-Com WBS User manual

Clear-Com

Clear-Com KB-111A Troubleshooting guide

Clear-Com

Clear-Com FreeSpeak II User manual

Clear-Com

Clear-Com Eclipse Median User manual

Clear-Com

Clear-Com Encore User manual

Clear-Com

Clear-Com WBS User manual

Clear-Com

Clear-Com LQ series User manual

Clear-Com

Clear-Com Eclipse HX-PiCo User manual

Clear-Com

Clear-Com LQ-2W2 User manual

Clear-Com

Clear-Com WBS-680 User manual

Clear-Com

Clear-Com HMS-4X Quick start guide

Clear-Com

Clear-Com ECLIPSE MATRIX User manual

Clear-Com

Clear-Com HelixNet How to use

Clear-Com

Clear-Com WBS-670 User manual

Clear-Com

Clear-Com ECLIPSE-32 MATRIX User manual

Clear-Com

Clear-Com TEMPEST 2400 User manual

Clear-Com

Clear-Com KB-702GM User manual

Clear-Com

Clear-Com RS-201 Troubleshooting guide

Clear-Com

Clear-Com FreeSpeak II User manual

Clear-Com

Clear-Com ENCORE MS-702 User manual

Clear-Com

Clear-Com Eclipse HX series User manual

Popular Intercom System manuals by other brands

Bticino

Bticino LINEA 3000 Installation

MSI

MSI MSI-140 owner's manual

golmar

golmar Stadio Plus instruction manual

CyberData

CyberData 011211 series Installation quick reference

Vidos

Vidos duo M1021 user manual

Vimar

Vimar ELVOX 7539/E Installation and operation manual

SSS Siedle

SSS Siedle BTSV 850-03 operating instructions

Dahua

Dahua VTO Series quick start guide

Elvox

Elvox 5651 Wiring instructions

Videx

Videx VIDEOKIT Series owner's manual

Rocom

Rocom Doortello Business FW T2.05W2.04 user guide

Viking

Viking E-35-EWP product manual

Safeguard Supply

Safeguard Supply LRA-EX1000 user manual

SSS Siedle

SSS Siedle BFCV 850 Series operating instructions

GRD

GRD MAX V2 user manual

Alecto

Alecto ADI-250 user manual

Aiphone

Aiphone IE-8MD Installation & operation manual

Perel

Perel EDB4 user manual