Clarke CVPW Quick guide

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

MODEL NO: CVPW

PART NO:

PART NO: 6499644

Weak Chemical Vane Pump

INTRODUCTION

Thank you for purchasing this CLARKE vane pump,

Suitable for use with weak corrosive chemicals such as weak acid, alkali and water based chemicals

Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully.

SAFETY

To ensure safe and efficient operation, it is essential to read and follow each of these warnings and precautions.

1. When used to pump flammable liquids, improper use or installation of this product can cause serious bodily injury or

death.

2. Do NOT smoke near the pump or use the pump near an open flame. Fire could result.

3. When pumping flammable liquids, all equipment must be grounded to prevent the build up of static electricity

which may ignite vapours or gases.

SPECIFICATIONS

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 months from the date of

purchase. Please keep your receipt which will be required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not

used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be returned to us without prior

permission.

This guarantee does not effect your statutory rights.

WARNING: THIS PRODUCT IS NOT SUITABLE FOR USE WITH FLUIDS FOR HUMAN CONSUMPTION OR AQUEOUS FLUIDS.

THIS PRODUCT SHOULD NOT BE USED FOR FLUID TRANSFER INTO AIRCRAFT.

Barrel Adaptor Size 2" BSP Outlet Tube Diameter 19 mm

Max Flow 0.35l per rotation Dims (WxDxH) 215 x 270 x 1325 mm

Inlet Tube Diameter 27 mm Product Weight 1.9 kg

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ASSEMBLY

FITTING THE PUMP TO A BARREL

1. Assemble the pump using the required number of inlet tubes. Use the PTFE tape at all connections

• The tube which contains the black fiter + mesh should be at the bottom.

2. Screw the collar into the threaded opening of the barrel.

3. Raise or lower the inlet tube so that it is just off of the bottom of the barrel when fitted.

USING THE PUMP

1. Make sure all connections are secure and place a suitable container under the spout.

2. Rotate the handle to draw fluid from the barrel.

• The first time you use the pump, liquid should begin flowing after several turns of the handle

MAINTENANCE

CLEANING THE INLET FILTER

1. Unscrew the inlet filter from the bottom of the inlet tube and clear away any debris it has trapped.

2. Replace the filter.

WHAT IS SUPPLIED ASSEMBLED

CAUTION: DO NOT USE THE PUMP WITHOUT THE FILTER IN PLACE.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

CHEMICAL RESISTANCE TABLE

• Room Temperature

•%SayMassConcentration

WATER ACIDS ALKALI PETROLEUM

BASED

HALOGENS ALCOHOL THINNER

Sea Water Acetic Acid

20%

Potassium

Hydroxide

25%

Silicone Oil Calcium

Chloride 10%

Ethanol 96% Acetone

Boric Acid

10%

Sodium

Hydroxide

solution 50%

Copper

Sulphate

Glycerine

Citric Acid

10%

Potassium

Dichromate

10%

Isopropanol

Hydraulic

Acid 35%

Soap Solution Methanol

Lactic Acid

80%

Sodium

Chloride 10%

Propanol

Nitric Acid

10%

Sodium

Nitrate 10%

Oxalic Acid

50%

Sodium

Thiosulphate

Phosphoric

Acid 50%

Zinc Chloride

10%

Sulphuric

Acid 70%

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

This manual suits for next models

Other Clarke Water Pump manuals

Clarke

Clarke CHF2 Installation and operation manual

Clarke

Clarke CPE20A3 Instruction Manual

Clarke

Clarke CPPRSS User manual

Clarke

Clarke CBM100SS Installation and operation manual

Clarke

Clarke ISP10A Installation and operation manual

Clarke

Clarke HSEC651A Instruction Manual

Clarke

Clarke PTP100 Instruction Manual

Clarke

Clarke IVP14A Instruction Manual

Clarke

Clarke PS75 Instruction Manual

Clarke

Clarke CBM240E Instruction Manual

Clarke

Clarke SWP900A Instruction Manual

Clarke

Clarke CRWP1 User manual

Clarke

Clarke CPE30A3 Instruction Manual

Clarke

Clarke TAM101 Installation and operation manual

Clarke

Clarke CDDFTP User manual

Clarke

Clarke HSE Series Installation and operation manual

Clarke

Clarke CPP3000B User manual

Clarke

Clarke PW80A Instruction Manual

Clarke

Clarke CSE400A Instruction Manual

Clarke

Clarke PSV3A Installation and operation manual

Clarke

Clarke PSV5A Instruction Manual

Clarke

Clarke CSE2 Instruction Manual

Clarke

Clarke Strong Arm CS10PRH Installation and operation manual

Clarke

Clarke CPRP560 Instruction Manual

Popular Water Pump manuals by other brands

Neptun

Neptun NPHW 5500 operating instructions

Sensidyne

Sensidyne Gilian BDX-II Operation & service manual

Draper

Draper 47808 instructions

Trolla

Trolla 12820 manual

Sunfab

Sunfab SVH Series installation guide

WilTec

WilTec 50740 Operation manual

Fieldmann

Fieldmann FVC 5015 EK user manual

Everbilt

Everbilt EFSUB5-122HD Use and care guide

Graco

Graco Husky 3300e manual

esotec

esotec 101018 operating manual

moyno

moyno 2000 CC Service manual

Becker

Becker BASIC VASF 2.80/1-0.AC230 operating instructions

Sykes AmeriPumps

Sykes AmeriPumps GP100M Operation and maintenance instructions

DUROMAX

DUROMAX XP WX Series user manual

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 operating instructions

Franklin Electric

Franklin Electric IPS Installation & operation manual

Xylem

Xylem e-1532 Series instruction manual

Milton Roy

Milton Roy PRIMEROYAL instruction manual