Clarke CVP1000 Quick guide

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

MODEL NO: CVP1000

PART NO:

PART NO: 6499640

Rotary Vane Pump

INTRODUCTION

Thank you for purchasing this CLARKE vane pump.

Suitable for use with water, petrol, diesel and xylol, (not suitable for use with acid, alkali and chemicals which are

corrosive to aluminium

Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully.

SAFETY

To ensure safe and efficient operation, it is essential to read and follow each of these warnings and precautions.

1. When used to pump flammable liquids, improper use or installation of this product can cause serious bodily injury or

death.

2. Do NOT smoke near the pump or use the pump near an open flame. Fire could result.

3. When pumping flammable liquids, all equipment must be grounded to prevent the build up of static electricity

which may ignite vapours or gases.

SPECIFICATIONS

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 months from the date of

purchase. Please keep your receipt which will be required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not

used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be returned to us without prior

permission.

This guarantee does not effect your statutory rights.

WARNING: THIS PRODUCT SHOULD NOT BE USED FOR FLUID TRANSFER INTO AIRCRAFT. THIS PRODUCT IS NOT

SUITABLE FOR USE WITH FLUIDS FOR HUMAN CONSUMPTION.

Drum Connector Size 2" BSP

Max Flow Approx 24L/min

Inlet Tube Diameter 29 mm i/d (32mm o/d)

Outlet Tube Diameter 22 mm i/d (25mm o/d)

Dims (W x D x H) 190 x 240 x 1280 mm

Product Weight 2.6 kg

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ASSEMBLY

FITTING THE PUMP TO A DRUM

1. Assemble the pump using the handle, collar, spout and inlet tube supplied.

• The pump body is marked with IN for the inlet tube and with an arrow for the outlet tube.

• Use PTFE tape at all connections.

2. Fit the collar over the inlet tube before screwing the tube to the pump body.

3. Screw the collar into the threaded opening of the barrel.

4. Raise or lower the inlet tube so that it is just above the bottom of the drum when fitted. Set in position by tightening

the collar.

USING THE PUMP

1. Make sure all connections are secure and place a suitable container under the outlet tube.

2. Rotate the handle to draw fluid from the drum.

• The first time you use the pump, it may take several turns of the handle before liquid begins to flow.

COMPONENTS SUPPLIED ASSEMBLED

This manual suits for next models

Table of contents

Other Clarke Water Pump manuals

Clarke

Clarke CPRP560 Instruction Manual

Clarke

Clarke CSV1A Instruction Manual

Clarke

Clarke CD1 - 1 Installation and operation manual

Clarke

Clarke HSE Series Installation and operation manual

Clarke

Clarke CPE15A1 Instruction Manual

Clarke

Clarke ECP20A3 Instruction Manual

Clarke

Clarke EBP1100 Instruction Manual

Clarke

Clarke MSP12 User manual

Clarke

Clarke CPE Series Instruction Manual

Clarke

Clarke CPP3000B User manual

Clarke

Clarke LEP1A 7260060 Instruction Manual

Clarke

Clarke SPE800 Instruction Manual

Clarke

Clarke PS75A Instruction Manual

Clarke

Clarke CSE400A Installation and operation manual

Clarke

Clarke CHF2 Installation and operation manual

Clarke

Clarke IVP13A Installation and operation manual

Clarke

Clarke CBP900 Instruction Manual

Clarke

Clarke PW50 Instruction Manual

Clarke

Clarke BPT600 Installation and operation manual

Clarke

Clarke CBB75 Instruction Manual

Clarke

Clarke CBM100SS Installation and operation manual

Clarke

Clarke PW50A Instruction Manual

Clarke

Clarke CWP1000A Instruction Manual

Clarke

Clarke PSE1A Instruction Manual

Popular Water Pump manuals by other brands

Neptun

Neptun NPHW 5500 operating instructions

Sensidyne

Sensidyne Gilian BDX-II Operation & service manual

Draper

Draper 47808 instructions

Trolla

Trolla 12820 manual

Sunfab

Sunfab SVH Series installation guide

WilTec

WilTec 50740 Operation manual

Fieldmann

Fieldmann FVC 5015 EK user manual

Everbilt

Everbilt EFSUB5-122HD Use and care guide

Graco

Graco Husky 3300e manual

esotec

esotec 101018 operating manual

moyno

moyno 2000 CC Service manual

Becker

Becker BASIC VASF 2.80/1-0.AC230 operating instructions

Sykes AmeriPumps

Sykes AmeriPumps GP100M Operation and maintenance instructions

DUROMAX

DUROMAX XP WX Series user manual

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 operating instructions

Franklin Electric

Franklin Electric IPS Installation & operation manual

Xylem

Xylem e-1532 Series instruction manual

Milton Roy

Milton Roy PRIMEROYAL instruction manual