CKD FLCR-G Series User manual
/ 2023-02-24 SM-A40842-A/4
FLCR-G Series
Electric Actuator
Table Type
INSTRUCTION MANUAL
Read this Instruction Manual before using the product.
In particular, read the safety notes carefully.
Keep this Instruction Manual safe for use at any time.
22023-02-24 SM-A40842-A/4
PREFACE
Thank you for purchasing CKD's “FLCR-G Series” electric actuator.
The FLCR series (table type) is ideal for workpiece transfer and multi-point positioning
under short-stroke conditions. A motor built in the actuator allows acceleration and
deceleration to be adjusted as desired, eliminating the need of a shock absorber and
saving space.
This Instruction Manual describes basic matters related to the operation of this product
in order to fully demonstrate its performance. Please read this Instruction Manual
thoroughly and use the product properly.
Keep this Instruction Manual in a safe place and be careful not to lose it.
Product specifications and appearances presented in this Instruction Manual are
subject to change without notice.
32023-02-24 SM-A40842-A/4
SAFETY INFORMATION
When designing and manufacturing any device incorporating the product, the
manufacturer has an obligation to ensure that the device is safe. To that end, make
sure that the safety of the machine mechanism of the device and the electric system
that controls such mechanism is ensured.
Ensure to observe organization’s standards, laws and regulations etc. for safety related
to design and management of the equipment.
In order to use our products safely, it is important to select, use, handle, and maintain
the products properly.
Observe the warnings and precautions described in this Instruction Manual to ensure
device safety.
Although various safety measures have been adopted in the product, customer's
improper handling may lead to an accident. Thoroughly read and understand this
Instruction Manual before using the product.
To explicitly indicate the severity and likelihood of a potential harm or damage,
precautions are classified into three categories: "DANGER", "WARNING", and
"CAUTION".
DANGER
Indicates an imminent hazard. Improper handling will
cause death or serious injury to people.
WARNING
Indicates a potential hazard. Improper handling may
cause death or serious injury to people.
CAUTION
Indicates a potential hazard. Improper handling may
cause injury to people or damage to property.
Precautions classified as "CAUTION" may still lead to serious results depending on the
situation.
All precautions are equally important and must be observed.
42023-02-24 SM-A40842-A/4
< Warning symbol type >
A general purpose mark
indicating prohibited (not
allowed) actions.
A mark that prohibits touching
equipment.
A mark that prohibits the act of
putting a finger.
A general purpose mark
indicating the danger such as
electric shock and burn.
A mark indicating the danger
that occurs when an automatic
equipment is started.
A general purpose mark
indicating what you must do.
A mark instructing you to
carefully read the Instruction
Manual.
A mark instructing the
connection of the ground wire.
In addition, the following icons indicate general precautions, usage tips, or technical
information or glossary.
⚫Contains useful information such as general precautions, supplementary
information, and reference information.
⚫Contains detailed information and tips on how to use it in a practical way.
⚫Contains technical information and glossary that you should know when using
the function.
52023-02-24 SM-A40842-A/4
Precautions on Product Use
DANGER
Do not use this product for the following applications.
Medical equipment pertaining to sustainment and management of
human life and body
Mechanism and mechanical device for transferring and transporting
people
Critical parts for securing safety in a mechanical device
WARNING
Never modify or implement additional processing to the product.
Modification or additional processing may not only pose a risk of fire or
electric shock, but may not satisfy the specifications described in this
Instruction Manual.
Never handle the product, install or remove the equipment until safety
is confirmed.
Check and maintain the machinery and equipment only after confirming
that all systems related to the product are safe. In addition, be careful
not to get an electric shock by turning off the power of the device or the
power of the corresponding equipment.
Even after the operation is stopped, as there may be high-temperature
parts or charging parts, carefully handle the product, and install or
remove the equipment.
The product must be handled by the person who has sufficient
knowledge and experience.
This product is designed and manufactured as general industrial
machinery equipment and parts, so please handle with care.
Use the product within the specifications.
It cannot be used outside of product-specific specifications.
Since this product is used in general industrial machinery equipment
and parts, it is not applicable when used in the following conditions. If
you consult with our company and understand the specifications of our
company product, it will apply. However, even in such a case, take
safety measures to avoid danger in case of failure.
◎Use under conditions and environments other
than those specified, and outdoor use.
◎Use in equipment and applications that come
into direct contact with nuclear power, railways,
aviation, ships, vehicles, medical equipment,
beverages and food.
◎Use in applications requiring safety, such as
recreational equipment, emergency shut off
circuits, press machines, brake circuits, and
safety measures.
◎Use in applications that are expected to have a
significant impact on people and property and
require special safety.
62023-02-24 SM-A40842-A/4
CONTENTS
PREFACE ........................................................................................2
SAFETY INFORMATION ...................................................................3
Precautions on Product Use............................................................................ 5
CONTENTS......................................................................................6
1. PRODUCT OVERVIEW .................................................................8
System Structure..................................................................................... 8
Instruction Manuals Related to This Product .......................................... 12
Part Name ............................................................................................. 13
Model Number Indication ...................................................................... 14
2. INSTALLATION .........................................................................19
Installation Environment ....................................................................... 25
Unpacking ............................................................................................. 26
Installing............................................................................................... 27
3. USAGE .....................................................................................31
Using the Controller............................................................................... 34
Manual Operation .................................................................................. 35
4. MAINTENANCE AND INSPECTION .............................................36
Periodic Inspection................................................................................ 37
Precautions on Product Disposal ............................................................ 38
5. TROUBLESHOOTING.................................................................39
Problems, Causes, and Solutions ........................................................... 39
6. WARRANTY PROVISIONS .........................................................43
72023-02-24 SM-A40842-A/4
Warranty Conditions .............................................................................. 43
Warranty Period .................................................................................... 43
7. Reference Information .............................................................44
Specifications ........................................................................................ 44
Cable specifications ............................................................................... 46
Index ...........................................................................................47
Glossary.......................................................................................48
82023-02-24 SM-A40842-A/4
1. PRODUCT OVERVIEW
System Structure
⚫Connect this product to an ECG-B Series controller. It does not work when
connected to other controllers such as ECG-A and ECR Series controllers.
System structure
◼ECG-B Series
※The above diagram is a configuration diagram for the parallel I/O specification. For other interface
specifications, refer to the instruction manual for each interface specification.
Supplied by the customer
PLC
Surge protector
Ferrite core
Ferrite core
Ferrite core
Power supply
noise filter
DC power supply
Ferrite core
Ferrite core
I/O cable
USB cable (mini-B)
PC setting software (free)
Download from our company website.
(URL:https://www.ckd.co.jp
)
Controller ECG-B series
Motor/encoder relay cable
Connectable actuators
FLSH-G series
FGRC-G series
FLCR-G series
PC
92023-02-24 SM-A40842-A/4
The following items can be purchased from us in the system configuration.
Component
Product name/Model no.
This product
Actuator
FLCR-G series
Accessories
Motor/encoder
relay cable
EA-CBLME4-□□□Note 1
Sold separately
Controller
ECG-B Series
Power supply connector
DFMC1,5/3-STF-3,5(PHOENIX CONTACT)
I/O cable
EA-CBLNP2-□□
24 VDC power supply
EA-PWR-KHNA240F-24
Noise filter
AX-NSF-NF2015A-OD
Brake release unit Note 2
EA-BRK-UNIT
Provided for free
PC setting software
S-Tools
Note 1: The actuators shipped on or before September 2022 include the relay cable of which model number is "EA-
CBLME2-□□□". Refer to “7.2 Cable specifications” for details.
Note 2: Used only when the actuator and a controller are not connected during installation or maintenance of the
actuator (equipped with a brake).
⚫A “ferrite core” is a magnetic material that uses a ferrite material. It is used to
attenuate high frequency noise.
⚫A “surge protector” is a device that protects equipment and communication
equipment from transient abnormal high voltages such as lightning.
⚫A “noise filter” is an electric or electronic circuit for removing noise and a
device that contains it.
10 2023-02-24 SM-A40842-A/4
◼ECMG Series
Table of contents
Other CKD Controllers manuals
CKD
CKD KBX-30 User manual
CKD
CKD KBZ Series User manual
CKD
CKD LN Series User manual
CKD
CKD ERL2 Series User manual
CKD
CKD SC1-6N User manual
CKD
CKD SELEX F.R.L. Series User manual
CKD
CKD EBS-M Series User manual
CKD
CKD KBX-T5 User manual
CKD
CKD IO-Link FCM Series User manual
CKD
CKD EVD-1000 Series User manual
CKD
CKD ABSODEX AX1022 User manual
CKD
CKD FCM Series User manual
CKD
CKD KBX Series User manual
CKD
CKD GCKW Series User manual
CKD
CKD ESSD Series User manual
CKD
CKD KBZ Series User manual
CKD
CKD FFLD Series User manual
CKD
CKD PARECT MEVT Series User manual
CKD
CKD FP Series User manual
CKD
CKD KBX-30E-U Series User manual
Popular Controllers manuals by other brands
Digiplex
Digiplex DGP-848 Programming guide
YASKAWA
YASKAWA SGM series user manual
Sinope
Sinope Calypso RM3500ZB installation guide
Isimet
Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions
LSIS
LSIS sv-ip5a user manual
Rockwell Automation
Rockwell Automation 1769-L31 installation instructions
