Cisco UCS 5100 Manual
Set up Syslog for Cisco UCS
Document ID: 110265
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Configure
Network Diagram
Steps to Configure Syslog to a Local File
Steps to Configure Syslog to a Remote Syslog Server
Verify
Troubleshoot
Related Information
Introduction
Cisco Unified Computing System (UCS) provides several diagnostic tools to aid in troubleshooting and
monitoring the environment. These tools include: command line debug statements, syslog, and SNMP (Call
home is another diagnostic/reporting tool). Syslog is the mechanism for processes and scripts to write log
entries. The callers can fully specify all of the log entries' characteristics.
A syslog daemon in the system captures logs and saves them in a rotating buffer. These logs can be viewed
internally or exported to syslog collectors. Multiple syslog collectors can be specified through configuration.
Prerequisites
Requirements
Cisco recommends that you:
Have a working knowledge of Cisco UCS Server Blade software and hardware.• Be familiar with the UCS Manager application.• Understand the impact and implications of the different commands described in this document.• Be familiar with the UCS components and topology. Refer to the diagram below for a typical
solution.
•
Components Used
The information in this document is based on Cisco UCS System.
Conventions
Refer to the Cisco Technical Tips Conventions for more information on document conventions.
Configure
The Cisco UCS Manager starts the syslog daemon and makes certain that it is active in both UCS fabric
interconnects. Logs generated by the processes in the NXOS and UCS Manager are exported to the same
configured external collectors.
All UCS Manager events are stored in the same fabric they were generated. As expected the passive fabric
interconnect will generate less log entires than the active, but some events are still expected. In order to ease
the parsing of the logs, all entries by the UCS Manager include the UCS hostname while the NXOS entries
include the fabric hostname.
These are a few examples of situations that will generate a syslog entry:
DME lifecycle events• Faults• Ad−hoc messages• Events relayed by the BMC and CMC processes•
Network Diagram
This is a typical topology used with Cisco UCS:
Steps to Configure Syslog to a Local File
This is the procedure:
Log in to Cisco UCS Manager.1. In the navigation pane, choose the Admin tab.2. Expand Faults, Events and Audit Log, then choose Syslog.3. In the work pane to the right, under File, choose enabled for the Admin State.4. Choose the alarm level from the drop down menu.5. Click Save Changes.6.
Steps to Configure Syslog to a Remote Syslog Server
For this configuration procedure, it is assumed that a syslog server was configured and is operating in the
network.
Log in to Cisco UCS Manager.1. In the navigation pane, select the Admin tab.2. Expand Faults, Events and Audit Log, then choose the Syslog option.3. In the work pane to the right, enable Remote Server #, enter IP address of syslog server, select
appropriate Levels and Facility.
4.
Click Save Changes.5.
Verify
You should begin to see events logged on to your syslog server and local files on Cisco UCS.
Troubleshoot
There is currently no specific troubleshooting information available for this configuration.
Related Information
Technical Support & Documentation − Cisco Systems•
Contacts & Feedback | Help | Site Map
© 2012 − 2013 Cisco Systems, Inc. All rights reserved. Terms & Conditions | Privacy Statement | Cookie Policy | Trademarks of
Cisco Systems, Inc.
Updated: Apr 27, 2010 Document ID: 110265
Other manuals for UCS 5100
6
Table of contents
Other Cisco Server manuals
Cisco
Cisco Profile Series User manual
Cisco
Cisco CSACS-1121-K9 User manual
Cisco
Cisco UCS B460 M4 Manual
Cisco
Cisco UCS C460 User manual
Cisco
Cisco UCS B200 M3 User manual
Cisco
Cisco UCS B200 M4 User manual
Cisco
Cisco UCS B200 M4 Manual
Cisco
Cisco SNS-3515 series Manual
Cisco
Cisco B200 M3 User manual
Cisco
Cisco SNS-3415 series User manual
Cisco
Cisco UCS C240 M3 User manual
Cisco
Cisco TelePresence Video Communication Server Service manual
Cisco
Cisco APIC M3 Installation and maintenance instructions
Cisco
Cisco TelePresence Service manual
Cisco
Cisco UCS B200 Manual
Cisco
Cisco SNS-3515 series User manual
Cisco
Cisco UCS E Series Operating and safety instructions
Cisco
Cisco Cisco MeetingPlace Express Operating instructions
Cisco
Cisco UCS C220 M3 User manual
Cisco
Cisco UCS C220 M3 User manual
