Cisco B200 M3 User manual

Americas Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Cisco B200 M3 Blade Server

Statement of Volatility

Publication Date: November 19, 2013

The Cisco B200 M3 blade server has multiple serial, electrically erasable, and programmable nonvolatile

memory components (EEPROM and Flash memory) that are used to store manufacturing hardware

identification and hardware configuration information. The majority of serial EEPROMs and flash

memories are not written by users and contain no customer information. Procedures for clearing the few

flash devices that can retain customer data are included in this document.

•Restoring the BIOS to the Factory Default Settings

•Restoring the LSI SAS Controller to the Factory Default Settings

•Restoring the CIMC to the Factory Default Settings

•Resetting the CMOS From UCS Manager

Restoring the BIOS to the Factory Default Settings

Use the following procedure to restore the BIOS to the factory default settings through the UCS Manager

remote KVM or a local KVM I/O cable that is connected directly to the blade server.

Step 1 Press F2 to access the BIOS setup.

Step 2 Click the Save and Exit tab.

Step 3 On the Save and Exit tab, click Load Default Values.

Step 4 Click Yes.

Step 5 Click Save and Exit or press F10.

Step 6 Click Yes to reboot the blade server.

Cisco B200 M3 Blade Server Statement of Volatility

Restoring the LSI SAS Controller to the Factory Default Settings

Use the following procedure to restore the LSI SAS controller to the factory default settings through the

UCS Manager remote KVM or a local KVM I/O cable that is connected directly to the blade server.

Step 1 Press Ctrl-H to log on to the web GUI.

Step 2 Click Start.

Step 3 Click the Controller Properties tab.

Step 4 Click Next.

Step 5 Click Set Factory Defaults.

Step 6 Click Yes.

Step 7 Click Submit.

Step 8 Press Ctrl-Alt-Delete to reboot the blade server.

Restoring the CIMC to the Factory Default Settings

Use the following procedure to restore the Cisco Integrated Management Controller (CIMC) to the

factory default settings.

Step 1 Shut down the blade server to power it down.

Step 2 Remove the blade server from the chassis for 30 seconds or longer to turn off the standby power.

Step 3 Insert the blade server back into the chassis to power it on, which will automatically reboot the CIMC

and restore it to its factory default settings.

Resetting the CMOS From UCS Manager

Use the following procedure to reset the CMOS from UCS Manager.

Step 1 In the UCS Manager navigation window, click the Equipment tab.

Step 2 On the Equipment tab, choose Equipment > Chassis > Chassis Number > Servers.

Step 3 Choose the server on which you want to reset the CMOS.

Step 4 In the Work pane, click the General tab.

Step 5 In the Actions area, click Recover Server.

Step 6 In the Recover Server dialog box, click Reset CMOS and then click OK.

Table of contents

Other Cisco Server manuals

Cisco

Cisco UCS M3 Series User manual

Cisco

Cisco UCS B250 M1 Manual

Cisco

Cisco UCS E Series User manual

Cisco

Cisco AS5200-PWR-AC Parts list manual

Cisco

Cisco C880 M5 User manual

Cisco

Cisco UCS C22 Installation and maintenance instructions

Cisco

Cisco PDS2000 User manual

Cisco

Cisco C220 M3 Manual

Cisco

Cisco ONS 15600 User manual

Cisco

Cisco UCS 6500 Series User manual

Cisco

Cisco Profile Series User manual

Cisco

Cisco UCS C210 Installation and maintenance instructions

Cisco

Cisco UCS C220 User manual

Cisco

Cisco UCS C240 M4 Installation and maintenance instructions

Cisco

Cisco 7835-H2 - Media Convergence Server User manual

Cisco

Cisco UCS E Series Operating and safety instructions

Cisco

Cisco UCS 5108 User manual

Cisco

Cisco CSACS-1121-K9 User manual

Cisco

Cisco ISE-3315 User manual

Cisco

Cisco UCS B200 M3 System manual

Cisco

Cisco UCS C250 Installation and maintenance instructions

Cisco

Cisco UCS C220 M3 Installation and maintenance instructions

Cisco

Cisco UCS C22 Installation and maintenance instructions

Cisco

Cisco TelePresence Service manual

Popular Server manuals by other brands

HP AlphaServer ES47 Cli reference manual

Dell

Dell PowerEdge R410 Getting started

PowerNAS

PowerNAS CMA quick start guide

Supero

Supero FatTwin F617R3-FT user manual

MSI

MSI P1-109N-L70 user manual

Dell

Dell PowerEdge XE9640 Installation and service manual

Dell

Dell PS4100 Hardware

EtroVISION

EtroVISION EV3151 user manual

NEC

NEC Express5800/T110j System configuration guide

HP ProLiant Gen9 user guide

Compaq

Compaq ProLiant 3000 Maintenance and service guide

Dell

Dell PowerEdge 3YPMN Getting started guide

iRobo

iRobo IPC2U user manual

Nortel

Nortel 1000 Con?guration guide user manual

Asus

Asus AP7500 Hardware reference guide

Avid Technology

Avid Technology AirSpeed 5000 manual

HP Integrity rx2600 overview

Milestone

Milestone Husky IVO 350T Getting started