Cisco LINKSYS AG241 User manual

Model No.

Quick Installation Guide

A Division of Cisco Systems, Inc.

WIRED

AG241 (EU/LA/UK)

with 4-Port Switch

ADSL2 Gateway

Package Contents

•ADSL2Gateway

•UserGuideonCD-ROM

• Ethernet Network Cable

• Phone Cable

• Power Adapter

• Microfilterorsplitter(notsuppliedwith

all models)

• Quick Installation

Connect the ADSL2 Gateway

In Step 1, you will connect the Gateway

to your ADSL line and to the computers

in your home or business.

First, make sure that all the devices that

you’ll be working with are powered

down, including your PCs and the

Gateway.

AConnect one end of the provided

phone cable to the wall jack with

ADSL service.

NOTE: To avoid interference, you

may need to place a

microfilter or splitter

between the phone

cable and wall jack.

Contact your service

provider for more

information.

BConnect the other end of the

phone cable to the LINE port that

is on the back of the Gateway.

CConnect one end of the provided

Ethernet cable to your PC’s

Ethernet adapter. Connect the

other end of the cable to one of

the Ethernet ports on the back of

the Gateway. Repeat this process

for every PC that you want to

connect to the Gateway.

If you are connecting more than

four PCs to the Gateway, you will

also need to connect a hub or

switch to the Gateway.

NOTE: If your PC’s Ethernet

adapter is not set up, refer

to the Ethernet adapter’s

user guide for more

information.

DConnect the power adapter to

the Gateway. Connect the power

adapter to the electrical outlet.

ETurn on the Gateway. Then, turn

on the first PC that you want to use

to configure the Gateway.

Proceed to Step 2: Configure the

ADSL2 Gateway.

IMPORTANT: Makesureyouonlyplacethe

microfilter or splitter between the phone

and the wall jack and not between the

Gateway and the wall jack. Otherwise your

ADSL will not connect.

In Step 2, you will configure the Gateway

to be able to gain access to the Internet

through your Internet Service Provider (ISP).

You will need the setup information

provided by your ADSL ISP. If you do not

have this information, please contact

them before proceeding.

The instructions from your ISP tell you how

to set up your PC for Internet access.

Because you are now using the Gateway

to share Internet access among several

computers, you will use the setup

information to configure the Gateway

instead of your PC.

NOTE: You only need to

configure the Gateway

once using the first

computer you set up.

AOpen your web browser. (You may

get an error message at this point.

Continue following these directions.)

Enter http://192.168.1.1 in the web

browser’s Address field. Press the

Enter key.

BAn Enter Network Password window

will appear (Windows XP users will

see a Connect to 192.168.1.1

window). Enter admin in lowercase

letters in the User Name field, and

enter admin in lowercase letters in

the Password field (admin is the

default user name and password.)

Then, click the OK button.

Configure the ADSL2 Gateway

Model No.

Dynamic IP Address

CThe Basic Setup screen will

appear with the Setup tab

selected. Based on the setup

instructions from your ISP, you may

need to provide the following

information.

ADSL Settings. The Gateway

supports five Encapsulations: RFC

1483 Bridged, RFC 1483 Routed,

RFC 2516 PPPoE, RFC 2364

PPPoA, IPoA, and Bridged Mode

Only. Each Basic Setup screen

and available features will differ

depending on what type of

encapsulation you select.

VC Settings. Virtual Circuits (VPI

and VCI): These fields consist of

two items: VPI (Virtual Path

Identifier) and VCI (Virtual Channel

Identifier). Your ISP will provide the

correct settings for these fields.

Multiplexing: Select LLC or VC,

depending on your ISP.

Your ISP will provide the correct

settings.

1 RFC 1483 Bridged

Dynamic IP Address

If your ISP says that you are

connecting through a dynamic IP

address, perform these steps:

aSelect RFC 1483 Routed for the

Encapsulation.

bSelect Obtain an IP Address

Automatically for the IP Setting.

Static IP Address

cClick the Save Settings button to

save the settings.

Static IP Address

If your ISP says that you are

connecting through a static or fixed

IP address, perform these steps:

aSelect RFC 1483 Bridged for the

Encapsulation.

bSelect Use the following IP

Address as the IP Setting.

cEnter the IP Address and the

Subnet Mask.

dEnter the Default Gateway

address.

eEnter the DNS in the Primary and/

or Secondary fields. You need to

enter at least one DNS address.

fClick the Save Settings button to

save the settings.

2 RFC 1483 Routed

If your ISP says that you are

connecting through RFC 1483

Routed using a static IP address,

perform these steps:

aSelect RFC 1483 Routed for the

Encapsulation.

bEnter the IP Address and the

Subnet Mask. RFC 1483 Routed

PPPoE

cEnter the Default Gateway

address.

dEnter the DNS in the Primary and/

or Secondary fields. You need to

enter at least one DNS address.

eClick the Save Settings button to

save the settings.

3 RFC 2516 PPPoE or RFC 2364

PPPoA

If your ISP says that you are

connecting through PPPoE or PPPoA,

or if you normally enter a user name

and password to access the

Internet, perform these steps:

aSelect RFC2516 PPPoE or RFC

2364 PPPoA as appropriate for the

Encapsulation.

bIf you selected PPPoE, enter the

Service Name (if required).

cEnter the User Name (if required).

dEnter the Password.

eSelect Keep Alive if you always

want to be connected to your ISP,

or select Connect on Demand if

you are charged for the time that

you are connected to your ISP.

fClick the Save Settings button to

save the settings.

PPPoA

NOTE:PPPoE users, who require a

second PPPoE by their ISP, can

select Enable for Second PPPoE

and enter the appropriate

information for the second account.

4IPoA

If your ISP says that you are

connecting through IPoA, perform

these steps:

aSelect IPoA for the Encapsulation.

bEnter the IP Address and the

Subnet Mask.

cEnter the Default Gateway

address.

dEnter the DNS in the Primary

and/or Secondary fields. You

need to enter at least one DNS

address.

eClick the Save Settings button to

save the settings.

DIf you haven’t already done so,

click the Save Settings button to

save your Setup settings. Close

the web browser.

ECongratulations! You’ve

successfully configured the

Gateway. Test the setup by

opening your web browser from

any computer and entering:

www.linksys.com/registration

FIf you are unable to reach our

website, you may want to review

the installation and configuration

sections in this Quick Installation or

refer to the Troubleshooting

section of the User Guide.

AG241-EU_LA_UK-QIG-41213NC JL

Linksys is a registered trademark or trademark of

Cisco Systems, Inc. and/or its affiliates in the U.S.

Foradditionalinformationortroubleshooting

help, refer to the User Guide on the CD-ROM

or the Technical Support Insert. You can also

e-mail for further support.

Website

http://www.linksys.com/international

Registrations

http://www.linksys.com/registration

IPoA

WIRED

A Division of Cisco Systems, Inc.

Modelnr.

Installationsvejledning

Modelnr.

AG241 (DK)

med 4-Port Switch

Pakkens indhold

• ADSL2-gatewayen

• Brugervejledning på cd-rom (kun på

engelsk)

• Ethernet-kabel

• Telefonledning

• Strømforsyning

• Mikrofilter eller fordeler (følger ikke

med alle modeller)

• Installationsvejledning

ADSL2-gatewayen

I trin 1 tilslutter du gatewayen til

ADSL-linjen og til computerne i dit

hjem/din virksomhed.

Kontroller først, at alle de involverede

enheder er slukket, herunder dine

pc'er og gatewayen.

ATilslut den ene ende af den

medfølgende telefonledning til

ADSL-vægstikket.

BEMÆRK: Det kan være

nødvendigt at placere

et mikrofilter eller en

fordeler mellem

telefonledningen og

vægstikket for at undgå

interferens. Kontakt din

tjenesteudbyder for at

få yderligere

oplysninger.

BTilslut den anden ende af

telefonledningen til LINE-porten

bag på gatewayen. (Figur B)

CTilslut den ene ende af det

medfølgende Ethernet-kabel til

pc'ens Ethernet-adapter

(Figur C1). Tilslut den anden

ende af kablet til en af Ethernet-

portene bag på gatewayen

(Figur C2). Gentag denne

fremgangsmåde for alle de

pc'er, du vil tilslutte til gatewayen.

Tilslutning af ADSL2-gatewayen

Popular Gateway manuals by other brands

LST

LST M500RFE-AS Specification sheet

Kinnex

Kinnex Media Gateway quick start guide

2N Telekomunikace

2N Telekomunikace 2N StarGate user manual

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Original instructions

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE user guide

Telsey

Telsey CPVA 500 - SIP Technical manual

RTA

RTA 460A-NNA4 Product user guide

Shaw

Shaw Gateway HDPVR user manual

ABB

ABB VSN900 Commissioning manual

Commander

Commander Pulse owner's manual

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E manual

NETGEAR

NETGEAR C6300BD installation guide

Amit

Amit CDW531AM user guide

HMS

HMS Netbiter EasyConnect EC150 user manual

Huawei

Huawei EchoLife HG620 user guide

AT&T

AT&T U-verse 3801 Replacement self-installation guide

Logic IO

Logic IO RTCU MX2 turbo Technical manual

Suttle

Suttle MediaMAX MXM-521 installation instructions