CDA HC6621FR Specification sheet
Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY
T : 01949 862 012 F : 01949 862 003 E : customer.care@cda.eu W : www.cda.eu www.cda.eu
HC6621FR
Ceramic Hob
Installation, Use and Maintenance
2
Important
The CDA Group Ltd cannot be held responsible for injuries or losses
caused by incorrect use or installation of this product. Please note that
CDA reserve the right to invalidate the guarantee supplied with this
product following incorrect installation or misuse of the appliance or
use in a commercial environment.
This appliance is not designed to be used by people (including
children) with reduced physical, sensorial or mental capacity, or
who lack experience or knowledge about it, unless they have had
supervision or instructions on how to use the appliance by someone
who is responsible for their safety.
Under no circumstances should any external covers be removed for
servicing or maintenance except by suitably qualified personnel.
Appliance information:
Please enter the details on the appliance rating plate below for
reference, to assist CDA Customer Care in the event of a fault with
your appliance and to register your appliance for guarantee purposes.
Appliance Model
Serial Number
CE Declarations of Conformity
This appliance has been manufactured to the strictest standards and
complies with all applicable legislation, including Electrical safety
(LVD) 2006/95/EC and Electromagnetic interference compatibility
3
(EMC) 2004/108/EC. Parts intended to come into contact with food
conform to 89/109/EC.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must be taken to a special
local authority waste collection centre or to a dealer providing
appliance recycling services.
Disposing of a household appliance separately avoids possible
negative consequences for the environment and health. It also
enables the constituent materials to be recovered, saving both energy
and resources. As a reminder of the need to dispose of household
appliances separately, the product is marked with a crossed-out
wheeled dustbin.
Please note:
•Ceramic hobs become hot and remain hot during and immediately
after use. Do not touch the hob until it has been allowed to cool.
•Keep children away from the appliance when in use.
•Never use the hob top for storage.
•Pan handles should never stand out beyond the edge of the
worktop. This will help to avoid children reaching them.
•Do not lean over the hob when it is in use.
•Follow the cleaning instructions carefully.
•Ensure the base of the saucepan is clean and dry before placing it
on the hob.
•Avoid hard shocks from cookware – the vitroceramic glass surface
is highly resistant but not unbreakable.
4
•Do not place hot lids flat on the hob top. A “suction” eect could
cause damage to the hob.
•Do not drag cookware across the hob top: in the long term, this
could cause damage to the hob.
•Do not store cleaning or flammable products in the unit below the
hob.
•Always use appropriate cookware.
•Do not cook unopened tins of food directly on the hob.
•Never put cooking foil or plastic materials on the ceramic surface
when the hob is hot. These materials could melt and cause
damage to the hob.
•This hob (Class 3) has been designed for use only as a cooking
appliance. Any other use should be considered incorrect and
therefore dangerous.
Important
•Do not use the hob if the glass surface is cracked or damaged to
prevent the risk of electric shock. Disconnect it from the power
supply.
•Ensure that the power cable of a connected electrical appliance
near the hob is not in contact with the cooking zones.
Please note: When connecting the hob to the power and switching it
on for the first time the cooking zone displays may show the letter " ".
This is not a fault and the letter " " should disappear after each zone’s
use. Please see page 11 for more information.
5
Using your hob
Zones:
1. Front left 2.3kW 210 mm
2. Back left 1.2kW 145 mm
3. Front right 1.2kW 145mm
4. Back right 1.8kW 180 mm
Control panel:
1. On/o sensor 4. Plus setting selector
2. Safety key lock sensor with LED 5. Minus setting selector
3. Cooking zone sensors 6. Cooking zone indicators
fig. 1
1
2
3
4
fig. 2 12
3
4
35
66
6
Using Your Hob
To switch the hob on
•To switch the power on, touch and hold the "On/o sensor" (1) for
approximately two seconds. The hob will beep and all four cooking
zone indicators will show “0”.
Please note: When switching the hob on after the appliance has
been switched o at the mains, the cooking zone indicators may
show, an " " and the safety key lock may activate. This is normal.
Simply press and hold the safety key lock sensor for approximately 2
seconds to disengage the lock and continue with normal operation.
The indicators should disappear with each zone's usage (but will show
after use if a zone is still hot to the touch).
To activate a zone and set a power level
•Simply switch the hob on and select the desired zone using the
relevant cooking zone sensor (3). Then, use the plus or minus
setting selectors to set the desired power level. The standard
power levels range from 1 (minimum) to 9 (maximum). The hob will
then begin heating.
Please note: If a power level is not set within ten seconds of switching
the hob on, the hob will switch o automatically.
To deactivate a zone
•Simply touch the plus and minus setting selectors simultaneously.
Alternatively, you can use the minus setting selector (5) to return the
power level to 0. The cooking zone indicator will display a "0" to
confirm that the zone is now inactive.
7
• If switching o multiple zones, the above step needs to be taken
for each zone. When all the zones are at "0", the hob will switch
o automatically after approximately ten seconds.
•To switch o the hob immediately, touch and hold the "On/o
sensor" (1) for approximately two seconds.
Please note: Any zones that are still hot to the touch will display an
" " or " " provided the mains power supply is not interrupted.
Operating time limiter
Each zone has an operating time limiter to increase overall eciency
and to prevent the hob from being left on indefinitely. If a zone's heat
setting is not changed for a specific duration then the associated zone
is automatically switched o and residual heat indicator activated.
Zones can still be used as normal in accordance with the operating
instructions. The operating time limiter is set according to the last
selected heat setting. The maximum operating times for each setting
can be found below.
10
1
Zone Power Level
Maximum
Operating Time
(hours)
234 5 6 7 8 9
6 5 5 4 1.5 1.5 1.5 1.510
8
Auto-heat Function
All zones are equipped with an auto-heat function, which reduces the
warming up time for the zone. Each power level has a limited time
for which the auto-heat function can be used. A table showing these
times is shown at the bottom of this page.
To activate the auto-heat function on a zone
•Switch the hob on, if not already so, and touch the relevant cooking
zone sensor. Next, touch the minus setting selector (5) to set the
power level to 9. Then, touch the plus setting selector (4) and the
cooking zone indicator should alternate between 9 and the letter
'A'. Finally, press and hold the minus setting selector (5) to set the
desired auto-heat power level.
Please note: You can use the plus setting selector (4) to adjust the
power level if you go too low but pressing the minus setting selector
a second time will cancel the auto-heat function and you will have to
start again.
To deactivate the auto-heat function
• Simply touch the desired zone's minus setting selector (6). The
display will return the preset power level.
1
1
Zone Power Level
Maximum
Operating Time
(minutes)
234 5 6 7 8 9
3 4.8 6.5 8.5 2.5 3.5 4.5 - -- -
9
Please note: The auto-heat function is not compatible with power
level 9 or the keep warm function.
Keep Warm Function
Each zone is equipped with a keep warm function that is designed to
keep food at a stable temperature. This allows the serving of food to
be delayed and also for the melting of butter or chocolate. The "Keep
warm" function is available between "0" and "1" heat settings and is
shown on a cooking zone indicator as " ".
To activate the keep warm function
• Switch the hob on if necessary and then simply touch the desired
cooking zone sensor (3) and set the power level to 1 using the plus
setting selector (4) and then use the minus setting selector (5) to set
the power level to " ".
• Due to the risk of the spread of bacteria it is not advisable to keep
food warm for too long. We recommend the keep warm function’s
use is limited to two hours in order to keep food as safe as possible.
To deactivate the keep warm function
• Touch the desired cooking zone sensor, unless adjustment is
already active (indicated by a decimal point next to the zone
indicator's power level), and then use the plus or minus setting
selectors to set the power to "0" or a higher heat setting if required.
10
Safety Key Lock
To prevent accidental use, the hob has a safety key lock which
switches controls o temporarily or completely. The safety key lock
can be activated when the hob is turned on but not when power has
been switched o at, or the appliance disconnected from, the mains.
The safety key lock is automatically activated after mains power
supply has been restored.
To activate the safety key lock
With the hob switched on, simply touch the safety key lock sensor (2)
for approximately 2 seconds. The hob will beep and the safety key
lock LED should illuminate. With either one or more zones actively
heating the lock can still be activated. Simply press and hold the
safety key lock sensor (2) for approximately 2 seconds. The hob will
beep and the safety key lock LED should illuminate.
To deactivate the safety key lock
Simply touch and hold the safety key lock sensor (2) for approximately
2 seconds. The hob will beep and the safety key lock LED should
extinguish.
Please note: The safety key lock may activate when the power supply
is activated for the first time. The safety key lock sensor LED will flash
when you try to operate the hob if so. Simply deactivate the safety key
lock as per the above step and proceed to use the hob as normal.
Other manuals for HC6621FR
1
Table of contents
Other CDA Hob manuals
CDA
CDA HN6111FR Quick start guide
CDA
CDA HC6212FR Quick start guide
CDA
CDA HG3601FR Reference manual
CDA
CDA HN6411 Quick start guide
CDA
CDA HC9626FR Quick start guide
CDA
CDA HVN93 Reference manual
CDA
CDA Matrix MHN101FR User manual
CDA
CDA HC6621FR Quick start guide
CDA
CDA HVN 32 Series Instructions for use
CDA
CDA HG7251 User manual
CDA
CDA HVG980 Quick start guide
CDA
CDA MATRIX MHC101FR Reference manual
CDA
CDA hn9610 Reference manual
CDA
CDA CERAMIC HOBS HVC65 Instructions for use
CDA
CDA HVG670 Quick start guide
CDA
CDA hg6300 Reference manual
CDA
CDA HN6731FR Installation and operating instructions
CDA
CDA HG9321SS Quick start guide
CDA
CDA CERAMIC HOBS HVC65 Reference manual
CDA
CDA HVC70 Reference manual
