Canon S600 User manual

QY8-1374-000

REVISION 0



2001 CANON INC. CANON S600 0101 AB 0.25-0 PRINTED IN JAPAN (IMPRIME AU JAPON)

JAN. 2001

012001 AB 0.25-0

Application

This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation,

maintenance, and repair of products. This manual covers all localities where the products are sold. For

this reason, there may be information in this manual that does not apply to your locality.

Corrections

This manual could include technical inaccuracies or typographical errors due to improvements or

changes in the products. When changes occur in applicable products or in the content of this manual,

Canon will release technical information as the need arises. In the event of major changes in the

contents of this manual over a long or short period, Canon will issue a new edition of this manual

The following paragraph does not apply to any countries where such provisions are

inconsistent with local law.

Trademarks

The product names and company names described in this manual are the registered trademarks of the

individual companies.

copied, reproduced or translated into another language, in whole or in part, without the written consent

of Canon Inc., except in the case of internal business use.



2001 by Canon Inc.

CANON INC.

BJ Printer Technical Support Dept. 11

16-1, Shimonoge 3-chome, Takatsu-ku, Kawasaki, Kanagawa 213-8512, Japan

This manual has been produced on an Apple Power Macintosh 7300/180 personal computer and OKI

MICROLINE 803 PSIIV laser beam printer; printing films were printed on Agfa SelectSet Avantra 25. All

page layouts, logos, and parts-list data were saved with Canon Optical Disc Subsystem mo-5001S™ and

Optical Disc Cartridge mo-502M™, and Interface Kit mo-IF2™ for Macintosh. All graphics were produced

with MACROMEDIA FREEHAND™ 7.0J. All documents and all page layouts were created with

QuarkXpress™ 3.3 Japanese version.

I. ABOUT THIS MANUAL

This manual consists of four parts containing information for servicing the product.

Part 1: Product Specifications

Product overview and specifications.

Part 2: Troubleshooting

A guide to troubleshooting the product and identifying parts needing replacement.

Troubleshooting solutions are listed according to the error indications displayed by the

status indicator and by problem descriptions.

Part 3: Technical Reference

Block diagrams and information on the hardware's new technologies.

Part 4: Appendix

Pin configurations.

Disassembly and reassembly procedures are not fully covered in this manual.

Refer to the illustrations in the separate Parts Catalog as well.

Product

Specifications Troubleshooting Appendix

Technical

Reference

II. TABLE OF CONTENTS

Page

Part 1:

PRODUCT SPECIFICATIONS

1 - 1 1. PRODUCT OVERVIEW

1 - 1 1.1 Product Overview

1 - 3 2. SPECIFICATIONS

1 - 3 2.1 Printer Specifications

1 - 3 2.1.1 Printer specifications

1 - 4 2.1.2 Printer service life

1 - 4 2.1.3 BJ cartridge service life

1 - 5 2.2 Paper Specifications

1 - 5 2.2.1 Paper sizes and weights

1 - 5 2.2.2 Paper types and settings

1 - 6 2.2.3 Printing area

1 - 7 2.3 BJ Cartridge Specifications

1 - 7 2.4 Printer and Scanner Drivers

1 - 8 3. PACKING CONFIGURATION

1 - 9 4. PARTS CODE LIST

Part 2: TROUBLESHOOTING

2 - 1 1. PRINTER OPERATION

2 - 1 1.1 Printer Operation Procedure

2 - 1 1.2 Status Indicator

2 - 2 1.3 Operating the Printer

2 - 2 1.3.1 Cleaning operation

2 - 2 1.3.2 Printing the nozzle check pattern

2 - 4 1.3.3 Roller cleaning operation

2 - 5 2. SERVICING

2 - 5 2.1 Before Troubleshooting

2 - 6 2.2 Detectable Problems from System Start to Exit

2 - 9 2.3 Troubleshooting Problems

2 -10 2.4 Troubleshooting Error Indications

2 -13 3. DISASSEMBLY AND REASSEMBLY

2 -13 3.1 Cautions for Disassembly and Reassembly

2 -13 3.1.1 Cautions for ink stains (Ink path/ink mist)

2 -13 3.1.2 Damage by static electricity

2 -13 3.1.3 Deformation of spur tips

2 -14 3.2 Exploded View

2 -15 3.3 Disassembly and Reassembly

2 -15 3.3.1 Carriage lock release

2 -16 3.3.2 Removing and installing tap screws

2 -16 3.3.3 Installing and removing the carriage encoder film

2 -17 3.3.4 Handling encoder film

2 -17 3.3.5 Removing and installing the control board

2 -18 3.3.6 Removal of red screws prohibited

2 -18 3.3.7 Installing the logic board cover

2 -19 3.3.8 Handling the purge unit

2 -20 3.3.9 Installing the control ROM cover

2 -21 3.4 Adjustments and Settings After Disassembly and Reassembly

2 -21 3.4.1 Adjustments

2 -22 3.4.2 Applying grease

2 -23 3.4.3 Print head position adjustment

2 -24 3.4.4 Print head seam stripe adjustment

Page

2 -25 3.4.5 Setting the EEPROM

2 -26 4. OPERATION CHECK AFTER DISASSEMBLY AND REASSEMBLY

2 -26 4.1 Check Procedure

2 -27 5. TRANSPORTING THE PRINTER

2 -27 5.1 Procedure

2 -28 6. PARTS REPLACEMENT, PERIODIC INSPECTIONS, & TOOLS

2 -28 6.1 Parts Replacement

2 -28 6.2 Periodic Inspections

2 -28 6.3 Tool List

2 -29 7. SERVICE-RELATED FEATURES

2 -29 7.1 Service Mode Operations

2 -30 7.2 Test Printout

2 -31 7.3 Printing the EEPROM Information

2 -32 7.4 Resetting the EEPROM

2 -32 7.5 Setting the Printer Settings in the EEPROM

Part 3: TECHNICAL REFERENCE

3 - 1 1. PRINTER CONTROL SECTION

3 - 1 1.1 Printing Data and Control Signal Flow

3 - 2 1.2 Print Drive Method

3 - 3 1.2.1 Print drive control

3 - 4 1.2.2 Print driving method

3 - 5 1.3 Control During Printing

3 - 5 1.3.1 2-dot Pair + Bi-directional printing

3 - 5 1.3.2 Seam stripe control

3 - 5 1.3.3 Rest between scans (Border detection control)

3 - 6 1.3.4 Smear control and rest between pages

3 - 6 1.3.5 Automatic power ON/OFF

3 - 6 1.3.6 Print head protection from overheating

3 - 6 1.3.7 Power motor control

3 - 7 1.4 Detection Functions

3 - 7 1.4.1 Detection by sensors

3 - 7 1.4.2 Paper-end sensor

3 - 8 1.4.3 Ink sensor (Same as for BJ F600)

3 - 8 1.4.4 Cover sensor

3 - 8 1.4.5 Pump sensor

3 - 9 1.4.6 Internal temperature sensor

3 - 9 1.4.7 Head temperature sensor

3 - 9 1.4.8 ASF sensor

3 - 9 1.4.9 Carriage encoder/paper feed encoder

3 - 9 1.5 Other Sensing Features

3 - 9 1.5.1 Waste-ink detection

3 - 9 1.5.2 Print head detection

3 -10 2. ELECTRICAL DRIVE SECTION

3 -10 2.1 Block Diagram

3 -11 2.2 Electrical Section

3 -12 3. PRINTER'S MECHANICAL PARTS

3 -12 3.1 Overview of the Printer's Mechanical Parts

3 -12 3.1.1 Carriage

3 -12 3.1.2 Purge section

3 -13 3.1.3 Paper feed section

3 -14 3.2 Purge Section

3 -14 3.2.1 Purge section functions

III

Page

3 -15 3.2.2 Purge section components

3 -17 3.3 Paper Feed Section

3 -17 3.3.1 Paper feed components

3 -18 3.3.2 Friction separation system

3 -18 3.3.3 Paper transport section

3 -18 3.3.4 Paper discharge section

3 -19 4. LOGIC BOARD COMPONENTS

3 -22 5. OPERATION WITH A COMPUTER

3 -22 5.1 Printing Operation with the Basic Settings Sheet

3 -22 5.2 Using the Utility Sheet

3 -23 6. INK SUCTION AMOUNT IN THE CLEANING MODE

3 -24 7. TECHNICAL REFERENCE

3 -24 7.1 Printing Mode List

3 -25 8. PRINT HEAD

Part 4: APPENDIX

4 - 1 1. CONNECTOR LOCATIONS AND PIN CONFIGURATIONS

4 - 4 1.1 Carriage Board

4 - 6 1.2 Print Head

III. ILLUSTRATION INDEX

Page

Part 1:

PRODUCT SPECIFICATIONS

1 - 2 Figure 1 - 1 Printer Exterior

1 - 4 Figure 1 - 2 1500 Characters Pattern

1 - 4 Figure 1 - 3 JIS SCID No. 5

1 - 6 Figure 1 - 4 Printable Area

1 - 8 Figure 1 - 5 Packing Configuration

Part 2: TROUBLESHOOTING

2 - 1 Figure 2 - 1 Operation Panel

2 - 3 Figure 2 - 2 Nozzle Check Pattern Printout

2 -14 Figure 2 - 3 Exploded View

2 -15 Figure 2 - 4 Carriage Lock Release

2 -16 Figure 2 - 5 Encoder Film

2 -17 Figure 2 - 6 Short-Circuiting the Capacitor

2 -18 Figure 2 - 7 Do not Remove the Red Screws

2 -18 Figure 2 - 8 Installing the Logic Board Cover

2 -19 Figure 2 - 9 Handling the Purge Unit

2 -20 Figure 2 -10 Installing the ROM Cover

2 -22 Figure 2 -11 Applying Grease

2 -23 Figure 2 -12 Printing Position Adjustment Pattern

2 -24 Figure 2 -13 Seam Stripe Adjustment Pattern

2 -30 Figure 2 -14 Service/Factory Test Printout (Sample)

2 -31 Figure 2 -15 EEPROM Information Printout (Sample)

Part 3: TECHNICAL REFERENCE

3 - 1 Figure 3 - 1 Printing Signal Flow

3 - 2 Figure 3 - 2 Serial Data

3 - 3 Figure 3 - 3 Print Driving

3 - 4 Figure 3 - 4 Printing Driving Method

3 - 7 Figure 3 - 5 Location of Sensors

3 - 8 Figure 3 - 6 Ink Sensor

3 -10 Figure 3 - 7 Block Diagram

3 -12 Figure 3 - 8 Printer's Mechanical Parts

3 -15 Figure 3 - 9 Purge Section Components

3 -16 Figure 3 -10 Pump Operation

3 -17 Figure 3 -11 Paper Feeding

3 -19 Figure 3 -12 Control Board

3 -22 Figure 3 -13 Basic Settings Sheet (Sample)

3 -25 Figure 3 -14 Nozzle Array

Part 4: APPENDIX

4 - 1 Figure 4 - 1 Control Board

4 - 4 Figure 4 - 2 Carriage Board

4 - 6 Figure 4 - 3 BJ Cartridge

IV. TABLE INDEX

Page

Part 1: PRODUCT SPECIFICATIONS

1 - 9 Table 1- 1 PARTS CODE

Part 2: TROUBLESHOOTING

2 -10 Table 2- 1 ERROR INDICATIONS

Part 3: TECHNICAL REFERENCE

3 -24 Table 3 - 1 PRINTING MODE LIST

Other manuals for S600

This manual suits for next models

Table of contents

Other Canon Printer manuals

Canon

Canon BJC7000 Series User manual

Canon

Canon iPF6000S - imagePROGRAF Color Inkjet Printer User manual

Canon

Canon PIXMA MP210 Series Manual

Canon

Canon PIXMA MP510 User manual

Canon

Canon PIXMA TS8150 User manual

Canon

Canon LBP3310 User manual

Canon

Canon PIXMA MP600 User manual

Canon

Canon LBP5050 Series User manual

Canon

Canon MX720 Series Setup guide

Canon

Canon Oce VarioPrint 110 User manual

Canon

Canon Pixma iP5200 Series User manual

Canon

Canon imagePROGRAF TX-4000 User manual

Canon

Canon LASER SHOT LBP-470 User manual

Canon

Canon imagePROGRAF iPF810 User manual

Canon

Canon DS700 - Selphy Compact Photo Printer User manual

Canon

Canon i860 Series User manual

Canon

Canon imagePASS-N1 User manual

Canon

Canon i560 Series Configuration guide

Canon

Canon Color imageCLASS MF8580Cdw User manual

Canon

Canon PIXMA MG7500 Series User manual

Canon

Canon PIXMA MX360 Series Instruction and safety manual

Canon

Canon i455 Series Manual

Canon

Canon SELPHY CP1500 Assembly instructions

Canon

Canon imageRUNNER 2545 User manual

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Samsung

Samsung BIXOLON SRP-350plusF user manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Epson

Epson ET-7750 Programming guide

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Epson

Epson SC-F7100 series user guide

Epson

Epson Stylus C40UX Service manual

IRA3D

IRA3D POETRY4 Original instructions

Ricoh

Ricoh Aficio AP400 operating instructions

BIXOLON

BIXOLON SRP-352plusV user manual

Epson

Epson Stylus Photo PX700W Basic operation guide

Ricoh

Ricoh SP204SF user guide

Star Micronics

Star Micronics futurePRNT TSP100 Hardware manual

Epson

Epson TM-TM88V-i Technical reference guide