Canon PIXMA MX340 Series Instruction Manual
1
Installing Your Multifunction to Your
Network for the First Time
PIXMA MX340
Windows OS
Next >>
Installing Your Multifunction
to Your Network for the First Time
Preparing to Connect My Multifunction to My Network 3
Network Requirements 3
Important Information You Need Before Adding Your Multifunction 4
Downloading & Installing the Drivers 5
Download the Driver 5
Installing the Driver 8
PIXMA MX340
Windows OS
<< Previous Next >>
3
Preparing to Connect My Multifunction
To My Network
Network Requirements
Before connecting the machine to the network, make sure that configuration of the computer and access point or router is
complete, and that the computer is connected to the network.
Notes on Network Connection
•The configuration, router functions, setup procedures and security settings of the network device vary depending on your
system environment. For details, refer to your device's instruction manual or contact its manufacturer.
•The machine cannot be used over a wireless and wired connection at the same time.
Wireless Connection
Connect to your network environment over a wireless connection.
<< Previous Next >>
4
Preparing to Connect My Multifunction
To My Network << Previous Next >>
An "Ad-hoc connection," which establishes a direct
connection to the computer over a wireless connection
without using an access point, is not supported.
Be sure to prepare an access point.
Important InformationYou Need BeforeAdding Your Multifunction
The following information is required to connect to your access point or router.
•Access Point Name/Network Name:
Also referred to as SSID. A name to identify the specific access point.
•Network Key:
Also referred to as encryption key, WEP key or WPA/WPA2 passphrase, Pre-Shared key.
A password required to set to prevent unauthorized access to communication.
Check your access point or router for the following information, and then write it down.
NOTE: For details on how to check the following information, refer to the manual of your access point or router, or contact its manufacturer.
5
Download the Driver
To use the machine by connecting it to acomputer, software including the drivers needs to be copied (installed) to the computer's hard disk.The
installation process takes about 20 minutes.(The installation time varies depending on the computer environment or the number of applications
to be installed.)
Downloading and Installing the Drivers
Step One
Go to the Canon Canada Support Home Page
Click here to go to the Canon Canada Support Home Page
Step Two
Select Consumer & Home Office in the Product Type menu dropdown,
All-In-One Printer in the Product Family, PIXMA MX Series in the Product
Series and click on the Drivers & Software link for your model.
<< Previous Next >>
6
Downloading and Installing the Drivers
Step Three
In the Drivers / Software Selection section, select your
operating system in the Select OS dropdown menu.
Step Four
In the Drivers section, click the link* (red printing) for the MX
Driver
*Name varies by model
Step Five
On the next screen, read the information and instructions and
click I Agree -Begin Download
Choose to "Save" the file. Write down the file name and the
location to where the file is being saved.
<< Previous Next >>
7
Downloading and Installing the Drivers << Previous Next >>
Step Five
On the next screen, read the information and instructions and click I Agree -Begin Download
Once the file has been downloaded, double-click it to begin the installation process
IMPORTANT:
•Quit all running applications before installation.
•Log on as the administrator (or a member of the Administrators group).
•Do not switch users during the installation process.
•Internet connection may be required during the installation. Connection fees apply.
•It may be necessary to restart your computer during the installation process. Follow the on-screen instructions. The installation
resumes once your computer has restarted.
If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to
access the network. If such a warning message appears, set the security software to always allow access.
8
Downloading and Installing the Drivers
Step One
Click Next on the Welcome screen.
Installing the Driver
<< Previous Next >>
NOTE: If a User Account Control screen appears, click Continue or Yes (depending on Windows version) to continue.
NOTE: If the same screen reappears in subsequent steps, click Continue or Yes.
Step Two
Select your place of residence and click Next..
9
Downloading and Installing the Drivers
Step Three
Click Yes for the License Agreement.
<< Previous Next >>
Step Four
After searching for printers, the Detected Printers List appears.
Verify your printer is detected and click Next.
If the Please Allow All Install Wizard Processes screen appears,
click Next.
Installation starts. Follow any on-screen instructions to install the
software.
10
Downloading and Installing the Drivers
Step Five
Turn on the printer then click OK..
<< Previous Next >>
Step Six
On the Detected Printers List, select the printer (if more than
one is listed), then click Next.
Other manuals for PIXMA MX340 Series
9
Table of contents
Other Canon Printer manuals
Canon
Canon iP1900 Series User guide
Canon
Canon Satera LBP-5600SE User manual
Canon
Canon BJC-S9000 Manual
Canon
Canon PIXMA MG5350 User manual
Canon
Canon FAX-L170 Safety guide
Canon
Canon PIXMA MX700 Series User manual
Canon
Canon LBP631Cw User manual
Canon
Canon Color imageCLASS 8180c User manual
Canon
Canon PIXMA iX4000 User manual
Canon
Canon iP6700D - PIXMA Color Inkjet Printer User manual
Canon
Canon TS705 Setup guide
Canon
Canon PIXMA iP2700 User manual
Canon
Canon i70 Series User manual
Canon
Canon MF832Cdw User manual
Canon
Canon imagePROGRAF W8400 Installation and operation manual
Canon
Canon PIXMA MX431 User manual
Canon
Canon iP3500 - PIXMA Color Inkjet Printer User manual
Canon
Canon TS3100 Series User manual
Canon
Canon imagePROGRAF SD-21 User manual
Canon
Canon LBP-CX Series User manual
