Canon PIXMA MP240 User manual
Getting Started
Make sure to read this manual before using the machine. Please keep it in hand for future reference.
MP240
Symbols■
The following symbols are used to mark important instructions. Observe these instructions.
Instructions that, if ignored, could result in personal injury or material damage.
Instructions that must be observed for safe operation.
Additional explanations.
Descriptions for operations that take some time to complete.
About This Manual■
In this manual, most operations are described for MP260. The screens are based on MP260.
Microsoft is a registered trademark of Microsoft Corporation.
Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.
Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.
Macintosh and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.
•
•
•
•Model Number: K10321(MP240)
1
1
2
3
4
5
Contents
Remove the Protective Material
Turn the Power On
Install the FINE Cartridges
Install the Software
Loading Paper
After Installing the Machine
2
12 3 4 5
(A)
(E)
(B)
(C)
(D)
(C)
(B)
1
123
FINE cartridge power cord
Remove the Protective Material
First, check the included items
Manuals
Setup CD-ROM (containing the
drivers, applications and on-screen
manuals)
Warranty
•
•
•
Open the Paper
Output Tray (A).
Lift the Scanning Unit
(Cover) (B) until it locks
into place.
The Scanning Unit Support
(C) is fixed automatically.
Pull the orange protective tape (D) and
remove the protective material (E).
Then, lift the Scanning Unit (Cover) (B) slightly
and fold the Scanning Unit Support (C), then
gently close the Scanning Unit (Cover) (B).
Before turning on the machine, remove all the
orange tapes and the protective sheets.
•
Black
Color
A USB cable is necessary to connect the
machine with your computer.
•
3
12 3 4 5
(1)
(2)
(A) (C)
(B)
2
23
1
Turn the Power On
Plug in the power cord on the left side of
the machine and connect the other end to
the wall outlet.
Press the ON button (A) to turn on the machine.
Do NOT connect the USB cable at this stage.• Make sure that the Document Cover (B) is closed.•
Confirm that the POWER lamp (C) lights green.
4
(A)
(D)
(E)
3
1
Install the FINE Cartridges
Do not handle the FINE Cartridges
roughly such as applying them
excessive pressure or dropping
them.
•
Be sure to use the supplied FINE
Cartridges.
•
Lift the Scanning Unit (Cover) (A) until it locks into place.
The Scanning Unit Support (D) is fixed automatically. The FINE Cartridge Holder (E) comes out to the center.
(This is where you install the cartridges.)
If the FINE Cartridge Holder returns to the right, close the Scanning Unit (Cover) and reopen it.
If the FINE Cartridge Holder does not come out to the center, make sure that the power is turned on.
•
•
5
1 2 34 5
(G)
(F)
23
Open the Ink Cartridge Locking Cover ( ) on the right side.
Pinch (F) firmly and pull up the cover.
After removing the Black FINE Cartridge from its box, pull the
orange protective tape (G) in the direction of the arrow and
remove it gently.
Be careful not to stain your hands or surrounding work area with ink
on the removed protective tape.
•
6
45
3
Install the FINE Cartridges
Push down ( ) until you hear a click to close the Ink Cartridge Locking Cover ( )
completely.
View the Ink Cartridge Cover ( ) straight on and check that it is locked correctly (not at an
angle).
Insert the Color FINE Cartridge ( ) into the left slot ( ) in the same way.
Install the Black cartridge into the right holder, and the Color one into the
left holder.
•
Place the Black FINE Cartridge ( ) into the right slot ( ).
Do not knock the FINE Cartridge against the sides of the holder.
Also be sure to install it in a well-lit environment.
•
•
7
1 2 34 5
(A)
(D) (H)
(I)
6
Lift the Scanning Unit (Cover) (A) slightly and fold the Scanning Unit Support (D), then
gently close the Scanning Unit (Cover) (A).
Wait until "1" appears on the LED (H) (about 1 - 2 minutes) and go to the next step.•
Once you have installed the FINE Cartridges, do not remove them unnecessarily.•
If the Alarm lamp (I) lights orange, make sure that the FINE Cartridges are correctly installed.•
8
4
Macintosh (P.15)
Windows (P.9)
Install the Software
To use the machine by connecting it to a computer, software including
the printer driver needs to be copied (installed) to the computer's hard
disk.
The screens below are based on Windows Vista operating system
Ultimate Edition (hereafter referred to as "Windows Vista") and Mac
OS X v.10.5.x.
Quit all running applications before installation.
You need to log on as the administrator (or a member of the Administrators
group).
Do not switch users during the installation process.
It may be necessary to restart your computer during the installation process.
Follow the on-screen instructions and click OK, and do not remove the Setup
CD-ROM during restarting.
The installation resumes from where it left off when your computer has been
restarted.
Mac OS 9, Mac OS X Classic environments, or Mac OS X v.10.3.8 or earlier
are not supported.
•
•
•
•
•
Other manuals for PIXMA MP240
3
Table of contents
Other Canon Printer manuals
Canon
Canon iR2020 Series User manual
Canon
Canon LBP-2000 Service manual
Canon
Canon S820D User manual
Canon
Canon PIXMA MX700 Series User manual
Canon
Canon imagePROGRAF iPF770 User manual
Canon
Canon imageRUNNER ADVANCE-series User manual
Canon
Canon PIXMA MX420 Series User instructions
Canon
Canon PIXMA TR8560 Setup guide
Canon
Canon MP280 User manual
Canon
Canon Pixma iP110 series Setup guide
Canon
Canon PIXMA Pro9500 Mark II User manual
Canon
Canon imageCLASS LBP122dw User manual
Canon
Canon PIXMA G670 User manual
Canon
Canon image Prograf iPF 685 Series User manual
Canon
Canon iPF5100 - imagePROGRAF Color Inkjet Printer User manual
Canon
Canon PIXMA MG5720 Instruction Manual
Canon
Canon Pixma G3020 Series User manual
Canon
Canon imageRUNNER ADVANCE DX User manual
Canon
Canon PIXMA G4110 Series User manual
Canon
Canon BJC-S200 User manual
