Canon PIXMA Pro9500 Mark II User manual

Make sure to read this manual before using the printer. Please keep it in hand for future reference.

Getting Started

Read Me First

series

Photo Printer

Contents

After Installing the Printer

Install the Software

Install the Ink Tanks

Install the Print Head

Turn the Power On

Loading Paper

Preparation

Symbols■

The following symbols are used to mark important instructions. Observe these instructions.

Model Number: K10336 (Pro9500 Mark II)

Additional explanations.

Instructions that, if ignored, could result in personal injury or material damage.

Instructions that must be observed for safe operation.

Descriptions for operations that take some time to complete.

Caution

Macintosh and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.•

Microsoft is a registered trademark of Microsoft Corporation.•

Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.•

Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.•

Adobe, Adobe Photoshop, Adobe RGB and Adobe RGB (1998) are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and or other countries.•

1Preparation

Check the Included Items■

Manuals•

Before turning on the printer, remove all the orange tapes and the protective sheets.

Setup CD-ROM (containing the drivers, applications and on-screen manuals)•

Warranty•

power cord

A USB cable is necessary to connect the printer with your computer.•

Print Head ink tanks

612345

Place the printer on a flat surface.•

Do not place any object in front of the printer.•

You can print on large size paper such as 14" x 17"/355.6 x 431.8 mm or thick paper by loading the

paper in the Front Tray. In that case, keep a space of 15.7"/40 cm behind the printer.

•

Choosing a Location■

Do not install the printer where an object may fall on

it. The object may fall inside the printer, resulting in

malfunction.

•

Do not place any object on top of the printer. It may

fall into the printer when opening covers, resulting in

malfunction.

•

There are wheels on the back corners of the printer. Lift the front of the printer to move it back and forth easily.•

15.7"/40 cm behind the printer

612345

21 3

Turn the Power On

Conrm that the POWER lamp (B) lights blue.Turn on the printer (A).Plug the power cord into the back left of the

printer, then connect the other end to the wall

outlet.

Do NOT connect the USB cable at this stage.•

61 2 34 5

Install the Print Head

Handle the Print Head carefully. Do not drop or

apply excessive pressure to it.

•

Open the Top Cover (C).

The Print Head Holder (D) comes out. (This is where you install the

Print Head.)

The Print Head Holder makes a noise as it moves. This is normal operation.•

If the Print Head Holder does not move, make sure that the printer is turned on.•

Press the button (A).

The Front Tray (B) opens.

3 54

Firmly raise the Print Head Lock Lever (E) until it stops.

There may be some transparent or light color ink on the inside of the bag the Print Head comes in,

or the inside of the protective cap - this has no effect on print quality. Be careful not to get ink on

yourself when handling these items. Be careful not to stain your hands.

•

Remove the orange protective cap.Remove the Print Head from the silver

package.

61 2 34 5

6 7

Lower the Print Head Lock Lever (E) completely.Set the Print Head in place.

Pinch the Print Head Lock Lever rmly and lower it gently.•

Do not knock the Print Head against the sides of the holder.• Once you have installed the Print Head, do not remove it unnecessarily.•

4Install the Ink Tanks

Handle the ink tanks carefully. Do not drop or

apply excessive pressure to them.

•

Remove the ink tank from its package.

Do not hold the sides of the ink tank; ink may splash.•

If the Print Head Holder moves to the right, close

and reopen the Top Cover.

•

Be sure to use the supplied ink tanks.•

Remove and discard the orange protective cap (A) located on

the bottom of the ink tank.

Other manuals for PIXMA Pro9500 Mark II

This manual suits for next models

Table of contents

Other Canon Printer manuals

Canon

Canon imageCLASS MF449x User manual

Canon

Canon ImageRunner 4045 Administrator guide

Canon

Canon 2983B007 User manual

Canon

Canon MX520 series Setup guide

Canon

Canon PIXMA MX700 Series User manual

Canon

Canon PIXMA MP520 User manual

Canon

Canon imageClass LPB7100Cn User manual

Canon

Canon Selphy CP710 User manual

Canon

Canon PIXMA MX7600 User manual

Canon

Canon imageRUNNER 2224 User manual

Canon

Canon PIXMA MX392 Setup guide

Canon

Canon imagePRESS C1+ User manual

Canon

Canon LBP 3370 User manual

Canon

Canon PIXMA G2110 Series User manual

Canon

Canon PIXMA TS9020 Setup guide

Canon

Canon imagePRESS 1135 Series User manual

Canon

Canon PIXMA MX860 series User manual

Canon

Canon imageCLASS MFG500 Series Setup guide

Canon

Canon BJC-S6300 User manual

Canon

Canon PIXMA MP970 User manual

Canon

Canon iP3300 - PIXMA Color Inkjet Printer Manual

Canon

Canon Printer User manual

Canon

Canon SELPHY CP750 Configuration guide

Canon

Canon 1750 User manual

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Samsung

Samsung BIXOLON SRP-350plusF user manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Epson

Epson ET-7750 Programming guide

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Epson

Epson SC-F7100 series user guide

Epson

Epson Stylus C40UX Service manual

IRA3D

IRA3D POETRY4 Original instructions

Ricoh

Ricoh Aficio AP400 operating instructions

BIXOLON

BIXOLON SRP-352plusV user manual

Epson

Epson Stylus Photo PX700W Basic operation guide

Ricoh

Ricoh SP204SF user guide

Star Micronics

Star Micronics futurePRNT TSP100 Hardware manual

Epson

Epson TM-TM88V-i Technical reference guide