Canon PIXMA K10335 User manual
Make sure to read this manual before using the printer. Please keep it in hand for future reference.
Getting Started
Read Me First
series
Photo Printer
Contents
6
After Installing the Printer
Install the Software
5
Install the Ink Tanks
4
Install the Print Head
3
Turn the Power On
2
Loading Paper
Preparation
1
1
Symbols■
The following symbols are used to mark important instructions. Observe these instructions.
Additional explanations.
Instructions that, if ignored, could result in personal injury or material damage.
Instructions that must be observed for safe operation.
Model Number: K10335 (Pro9000 Mark II)
Macintosh and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.•
Descriptions for operations that take some time to complete.
Microsoft is a registered trademark of Microsoft Corporation.•
Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.•
Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.•
Caution
Adobe, Adobe Photoshop, Adobe RGB and Adobe RGB (1998) are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and or other countries.•
2
1Preparation
Check the Included Items■
Manuals•
ink tanksPrint Head
Before turning on the printer, remove all the orange tapes and the protective sheets.
Setup CD-ROM (containing the drivers, applications and on-screen manuals)•
Warranty•
power cord
A USB cable is necessary to connect the printer with your computer.•
3
612345
Place the printer on a flat surface.•
Do not place any object in front of the printer.•
You can print on large size paper such as 14" x 17"/355.6 x 431.8 mm or thick paper by loading the
paper in the Front Tray. In that case, keep a space of 15.7"/40 cm behind the printer.
•
Choosing a Location■
Do not install the printer where an object may fall on
it. The object may fall inside the printer, resulting in
malfunction.
•
Do not place any object on top of the printer. It may
fall into the printer when opening covers, resulting in
malfunction.
•
There are wheels on the back corners of the printer. Lift the front of the printer to move it back and forth easily.•
15.7"/40 cm behind the printer
4
612345
2
21 3
1
2
A
B
Turn the Power On
Conrm that the POWER lamp (B) lights green.Turn on the printer (A).Plug the power cord into the back left of the
printer, then connect the other end to the wall
outlet.
Do NOT connect the USB cable at this stage.•
5
61 2 34 5
3
1
A
B
C
D
2
Install the Print Head
Handle the Print Head carefully. Do not drop or
apply excessive pressure to it.
•
Open the Top Cover (C).
The Print Head Holder (D) comes out. (This is where you install the
Print Head.)
The Print Head Holder makes a noise as it moves. This is normal operation.•
If the Print Head Holder does not move, make sure that the printer is turned on.•
Press the button (A).
The Front Tray (B) opens.
6
3
4 53
E
Firmly raise the Print Head Lock Lever (E) until it stops.
There may be some transparent or light blue ink on the inside of the bag the Print Head comes in,
or the inside of the protective cap - this has no effect on print quality. Be careful not to get ink on
yourself when handling these items. Be careful not to stain your hands.
•
Remove the orange protective cap.Remove the Print Head from the silver
package.
7
61 2 34 5
76
E
Lower the Print Head Lock Lever (E) completely.Set the Print Head in place.
Pinch the Print Head Lock Lever rmly and lower it gently.•
Do not knock the Print Head against the sides of the holder.• Once you have installed the Print Head, do not remove it unnecessarily.•
8
4
21
1
2
A
Install the Ink Tanks
Handle the ink tanks carefully. Do not drop or
apply excessive pressure to them.
•
Pull the orange tape (1) in the
direction of the arrow to peel off the
protective lm and remove the lm (2)
completely.
Do not hold the sides of the ink tank; ink may splash.•
If the Print Head Holder moves to the right, close
and reopen the Top Cover.
•
Be sure to use the supplied ink tanks.•
While pressing down with your left thumb, twist off the orange
protective cap (A) located on the bottom of the ink tank.
This manual suits for next models
2
Table of contents
Other Canon Printer manuals
Canon
Canon FAX-L170 Safety guide
Canon
Canon pixma mg3620 Installation and user guide
Canon
Canon i900D Series Configuration guide
Canon
Canon LASER SHOT LBP3210 User manual
Canon
Canon Color imageRUNNER LBP3460 User manual
Canon
Canon iPF8400SE imagePROGRAF User manual
Canon
Canon FAX L160 User manual
Canon
Canon imageCLASS LBP6780dn User manual
Canon
Canon PIXMA G2110 Series User manual
Canon
Canon S520 User manual
Canon
Canon Color imageRUNNER LBP5360 Instruction Manual
Canon
Canon image Prograf iPF 685 Series User guide
Canon
Canon Laser Class 810 Assembly instructions
Canon
Canon MG3600 series User manual
Canon
Canon i 320 User manual
Canon
Canon BJC-S520 User manual
Canon
Canon PIXMA iP4820 Series User manual
Canon
Canon iP4600 - PIXMA Color Inkjet Printer User manual
Canon
Canon imagePROGRAF TA-30 Setup guide
Canon
Canon imageRUNNER ADVANCE DX 6000i Installation guide
