Canon MAXIFY MB2320 Instruction Manual
Getting Your Multifunction
Back On the Network
After A Router Or Network Change
MAXIFY MB2320
Windows OS
1
Getting Your Multifunction
Back On the Network
After A Router Or Network Change
MAXIFY MB2320
Windows OS
Preparing to Connect My Multifunction to My Network 3
Network Requirements 3
Notes on Wireless Connection 4
Setting up the Network Connection 5
2
Important
If any of the following situations exist
•You have replaced your Router or Access Point
•You want to use a different wireless network
•Router settings have been changed.
Please complete the following steps to apply the new configuration settings to your multifunction.
3
<< Previous Next >>
Information
Preparing to Connect the Multifunction
To the Network
Network Requirements
Before connecting the machine to the network, make sure that configuration of the computer and access point or router is
complete, and that the computer is connected to the network.
Wireless Connection
Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that
configuration of the computer and access point or router is complete.
4
Preparing to Connect the Multifunction
To the Network
5
Notes on Network Connection
•The configuration, router functions, setup procedures and security settings of
the network device vary depending on your system environment. For details,
refer to your device's instruction manual or contact its manufacturer.
•In an office setup, consult your network administrator
•If you connect to a network that is not protected with security measures, there
is a risk of disclosing data such as your personal information to a third party.
•Place the machine and computer on the same network segment.
Software Installation
To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk.
Installation time varies depending on the computer environment or the number of application software to be installed.
Setting Up the Network Connection
6
IMPORTANT
•Log on as the administrator (or a member of the Administrators group).
•Quit all running applications before installation.
•Do not switch users during the installation process.
•Internet connection may be required during the installation. Connection fees may apply. Consult the internet service provider.
•It may be necessary to restart your computer during the installation process. Follow the on-screen instructions and do not remove the
Setup CD-ROM during restarting. The installation resumes once your computer has restarted.
•If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access
the network. If such a warning message appears, set the security software to always allow access.
Installing the MB2320 on Your Wireless Network
When you reinstall your printer on your network because of a router or network change, you follow the same procedure as for a first time
install. A step-by-step walk through of the wireless setup is built in to the installation routine of the software that shipped with your PIXMA.
Insert the Setup CD-ROM * that came with your printer into your CD-ROM drive and proceed through the easy to follow instructions
If the following screen appears, click Start Setup Again
Setting Up the Network Connection
7
<< Previous Next >>
Setting Up the Network Connection
8
The setup program will start automatically. The setup instructions presented in this document describe the “Cableless Setup” method
which does not require the need to know the Access Point / SSID (network name), or network password and does not require the printer to
be temporarily connected to the computer with a USB cable.
The Cableless Setup is not supported in Windows XP. For Windows XP Users: Use the “Standard Setup” method. You will need to know your
Access Point name and Network Password when using the Standard setup.
*If you don’t have or cannot use the Setup CD-ROM, follow the steps below to start the setup.
•Download the software (click the link to download)
•Double-click the downloaded .exe file
If the User Account Control dialog box appears during the setup, click Yes or Continue.
Setting Up the Network Connection
99
Click Next on the initial screen.
Setting Up the Network Connection
1010
On the following screen, select Wireless LAN Connection, then click Next.
Other manuals for MAXIFY MB2320
2
Table of contents
Other Canon Printer manuals
Canon
Canon Pro9500 Mark II Series User manual
Canon
Canon imageRUNNER ADVANCE-series User manual
Canon
Canon PIXMA G5000 Series User manual
Canon
Canon imagePRESS C8000VP User manual
Canon
Canon imagePROGRAF iPF8400S User manual
Canon
Canon MG2900 Series User manual
Canon
Canon Color imageCLASS LBP7200Cdn User manual
Canon
Canon PIXMA IP8700 Series User manual
Canon
Canon MP21D III User manual
Canon
Canon PIXMA TS3322 User manual
Canon
Canon iR2020 Series User manual
Canon
Canon BJ-W9000 User manual
Canon
Canon GX7000 Series User manual
Canon
Canon LBP-1000 Instruction Manual
Canon
Canon imagePROGRAF iPF8300 User guide
Canon
Canon LBP228x User manual
Canon
Canon LBP352 User manual
Canon
Canon PIXMA MG5350 User manual
Canon
Canon PIXMA MG5720 Instruction Manual
Canon
Canon MF264dw II User manual
