Canon MultiPASS C530 User manual

CallOfl

COLOR BUBBLE JETTM PRINTER MULTIPASS TM

FAX•SCANNER •COPIER C530/C560

User's Manual

< iiil;i]iZ; ii iiiii ,iii!i!i!iii!iiiiii!i!!!iiiiili!ii!iiiii!i!ii i¸

Under the copyright laws, this manual may not be reproduced in any form, in whole or part,

without prior written consent of CCSI.

Canon Computer Systems, Inc. has reviewed this manual thoroughly in order to make it an

easy to use guide for your Canon MultiPASS system. All statements, technical information, and

recommendations in this guide and in any guides or related documents are believed reliable, but

the accuracy and completeness thereof are not guaranteed or warranted, and they are not intended

to be, nor should they be understood to be, representations or warranties concerning the products

described.

Your MultiPASS and the software media included with your system have been sold to you

subject to the limited warranties set forth in the warranty and license agreement enclosed with the

respective products. All software is licensed AS IS, as described in the license agreement enclosed

with the software media. Further, CCSI reserves the right to make changes in the specifications of

the products described in this guide at any time without notice and without obligation to notify

any person of such changes.

Preface ii

Canon, BCI, BJ,Bubble Jet, MultiPASS, ScanGear, and UHQ are trademarks and SelectExchange is

a service mark of Canon Inc.

All other product and brand names are trademarks or service marks of their respective owners.

ENERGYSTAR®COMPLIANT

As an ENERGYSTAR® Partner, Canon U.S.A., Inc. has determined that this product meets the

ENERGYSTAR® guidelines for energy efficiency.

Preface iii

PRE-INSTALLATION REQUIREMENTS FOR CANON FACSIMILE EQUIPMENT

A°

B°

Location

Supply a suitable table, cabinet, or desk. See Appendix A for the unit's dimensions and weight.

Appendix A, Specifications

Order Information

1. Only a single line, touch-tone or rotary telephone set is to be used.

2. Order an RJ11-C modular jack (USOC code), which should be installed

by the phone company. If the RJ11-C jack is not present, installation

cannot occur.

3. Order a normal business line from your telephone company's business representative. The

line should be a regular voice grade line or the equivalent. Use one line per unit.

DDD (DIRECT DISTANCE DIAL) LINE

-or-

IDDD INTERNATIONAL DIRECT DISTANCE DIAL) LINE IF YOU COMMUNICATE

OVERSEAS

Preface iv

Canon recommends an individual line following industry standards, e.g. the 2500 (Touch Tone)

or 500 (Rotary/Pulse Dial) telephones. A dedicated extension off a PBX unit without "Call

Waiting" can be used with your MultiPASS. Key telephone systems are not recommended because

they send non-standard signals to individual telephones for ringing and special codes, which may

cause a fax error.

C° Power Requirements

This equipment should be connected to a standard 120 volt AC, three-wire grounded outlet

only. Do not connect this unit to an outlet or power line shared with other appliances that

cause "electrical noise". Mr conditioners, electric typewriters, copiers, and machines of this

sort generate electrical noise which often interferes with communications equipment and the

sending and receiving of documents.

CONNECTION OF THE EQUIPMENT

This equipment complies with Part 68 of the FCC rules. On the rear panel of this equipment is a

label that contains, among other information, the FCC Registration Number and Ringer

Equivalence Number (REN) for this equipment. If requested, this information must be given to

the telephone company. This equipment may not be used on coin service provided by the

telephone company. Connection to party lines is subject to state tariffs.

Prcfacc V

An FCC compliant telephone cord and modular jack is provided with this equipment. This

equipment is designed to be connected to the telephone network or premises wiring using a

compatible modular jack which is Part 68 compliant. See Installation instructions for details.

The REN is used to determine the quantity of devices which may be connected to the telephone

line. Excessive RENs on the telephone line may result in the devices not ringing in response to an

incoming call. In most, but not all areas, the sum of the RENs should not exceed five (5.0). To be

certain of the number of devices that may be connected to the line, as determined by the total

RENs, contact the telephone company to determine the maximum REN for the calling area.

IN CASE OF EQUIPMENT MALFUNCTION

Should any malfunction occur which cannot be corrected by the procedures described in this

User'sManual, disconnect the equipment from the telephone line or unplug the power cord. The

telephone line should not be reconnected or the power cord plugged in until the problem is

completely resolved. Users should contact Canon Authorized Service Facilities for servicing of

equipment. Information regarding Authorized Service Facility locations can be obtained by calling

the Canon Computer Systems Customer Care Center. (See page 1=14for details.)

Preface vi

RIGHTS OF THE TELEPHONE COMPANY

Should the equipment cause harm to the telephone network, the telephone company may

temporarily disconnect service. The telephone company also retains the right to make changes in

facilities and services which may affect the operation of this equipment. When such changes are

necessary, the telephone company is required to give adequate prior notice to the user.

WARNING

Do not make any changes or modifications to the equipment unless otherwise specified in this

manual. If such changes or modifications should be made, you could be required to stop

operation of the equipment.

MultiPASS C530: Facsimile Transceiver, Model H12159

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept an interference received, including interference that may cause

undesired operation.

Preface vii

This equipment has been tested and found to comply with the limits for a class Bdigital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC

Rules. Do not make any changes or modifications to the equipment unless otherwise specified in

this manual. If such changes or modifications should be made, you could be required to stop

operation of the equipment.

Preface viii

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a

computer or other electronic device to send any message via a telephone fax machine unless such

message clearly contains in a margin at the top or bottom of each transmitted page or on the first

page of the transmission, the date and time it is sent and an identification of the business or other

entity, or other individual sending the message and the telephone number of the sending machine

or such business, other entity, or individual.

To automatically enter this information into your MultiPASS, follow the instructions in your

Quick Start Guide.

Preface ix

PRE-INSTALLATION REQUIREMENTS FOR CANON FACSIMILE EQUIPMENT

A. Location

Supply a suitable table, cabinet, or desk. See Appendix A for the unit's dimensions and weight.

Appendix A, Specifications

B. Order Information

1. Provide only a single-line to touch-tone or rotary telephone set terminated with a standard

4-pin modular phone plug. (Touch-tone is recommended if available in your area.)

2. Order an RJ11-C modular jack (USOC code), which should be installed by the phone

company. If the RJ11-C jack is not present, installation cannot occur.

3. Order a normal business line from your telephone company's business representative. The

line should be a regular voice grade line or equivalent. Use one line per unit.

DDD (DIRECT DISTANCE DIAL) LINE

-or-

IDDD INTERNATIONAL DIRECT DISTANCE DIAL) LINE IF YOU COMMUNICATE

OVERSEAS

P_'efa ce X

Other manuals for MultiPASS C530

This manual suits for next models

Table of contents

Other Canon All In One Printer manuals

Canon

Canon imagePRESS C800 Series User manual

Canon

Canon PIXMA MX860 series User manual

Canon

Canon iR C3200 Series User manual

Canon

Canon MF7280 - ImageCLASS B/W Laser User manual

Canon

Canon PIXMA MP470 User manual

Canon

Canon PIXMA MG5520 User manual

Canon

Canon imageRUNNER 1435i User manual

Canon

Canon PIXMA MX372 User manual

Canon

Canon IMAGERUNNER ADVANCE C5030 User manual

Canon

Canon imageRUNNER 105 User manual

Canon

Canon imageRUNNER ADVANCE 715iZ III User manual

Canon

Canon imageRUNNER 2206N User manual

Canon

Canon imageRUNNER ADVANCE DX C477iZ User manual

Canon

Canon G4200 Setup guide

Canon

Canon imagerunner advance 4551i User manual

Canon

Canon PIXMA MX892 User manual

Canon

Canon PIXMA MP990 User manual

Canon

Canon K10550 User manual

Canon

Canon imageRUNNER ADVANCE C2030 User manual

Canon

Canon PIXMA MX712 User manual

Canon

Canon iR1510 User manual

Canon

Canon iR3245 User manual

Canon

Canon PIXMA MX472 Instruction Manual

Canon

Canon PIXMA MX374 User manual

Popular All In One Printer manuals by other brands

Triumph Adler

Triumph Adler DC 2016 Instruction handbook

Epson

Epson WorkForce WF-2510 Basic guide

Epson

Epson Stylus Scan 2000 Product information guide

Epson

Epson PictureMate Snap PM 240 Start here

Konica Minolta

Konica Minolta bizhub C35 user guide

Brother

Brother MFC-J430w user guide

Konica Minolta

Konica Minolta BIZHUB 558 Quick reference guide

Lexmark

Lexmark MX710 Series setup sheet

Brother

Brother MFC-9760 owner's manual

Lexmark

Lexmark XC8155 user guide

Lexmark

Lexmark X642E Service manual

Sharp

Sharp MX-2310U Start guide

Aficio

Aficio 200 manual

Ricoh

Ricoh Pro C900 Brochure & specs

Lexmark

Lexmark X925 Installation

Brother

Brother Business Smart MFC-J4510dw manual

Epson

Epson Stylus CX8400 Series Brochure & specs

Oce

Oce VarioLink 5022 user guide