Brother GT-3 Series User manual

Other manuals for GT-3 Series

10

This manual suits for next models

1

Table of contents

Other Brother Printer manuals

Brother

Brother HL-2700CN Series User manual

Brother

Brother MFC490CW - Color Inkjet - All-in-One Operating and safety instructions

Brother

Brother ImageCenter ADS-2400N Operating manual

Brother

Brother MFC-J6910DW Operating and maintenance manual

Brother

Brother LASER PRINTER HL-2140 User manual

Brother

Brother HL-L5050DN User manual

Brother

Brother 1870N - HL B/W Laser Printer Quick start guide

Brother

Brother MFC-J6545DW Operating manual

Brother

Brother HL-1110 User manual

Brother

Brother MFC-8870DW Instruction Manual

Brother

Brother HL-760 Series User manual

Brother

Brother HL-5440D Operating manual

Brother

Brother HL-1050 Use and care manual

Brother

Brother MFC-T920DW User manual

Brother

Brother HL-3260N User manual

Brother

Brother P-touch Embellish ELITE PT-P715eBT User manual

Brother

Brother HL-1070 User manual

Brother

Brother 1435 - HL B/W Laser Printer Quick start guide

Brother

Brother HL-2700CN Series User manual

Brother

Brother HL-5030 User manual

Brother

Brother HL-1118 User manual

Brother

Brother HL-2460 Series User manual

Brother

Brother HL-5590DN User manual

Brother

Brother HL-6050 User manual

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series quick start guide

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Canon

Canon LASER SHOT LBP-1210 Specifications

Samsung

Samsung BIXOLON SRP-350plusF user manual

Canon

Canon PIXMA PRO-1 Series Getting started

Canon

Canon PIXMA G3560 Online manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Epson

Epson ET-7750 Programming guide

Canon

Canon CLBR 460ps Service manual

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Epson

Epson SC-F7100 series user guide

Epson

Epson Stylus C40UX Service manual

Canon

Canon imagePASS-A2 Service guide

Canon

Canon S820D user guide

Changing the Ink Tubes

1. Make sure the GT-3 is not in the middle of any operation.

2. Select head replacement from the maintenance menu, and choose the color tube to

be replaced and press okay.

3. Remove the cartridge of the target color, and press the okay button.

4. Insert the filter cartridge to the ink cartridge slot, and then press the okay button (the

ink draining begins).Wait until the message “Turn off & please change head”

appears.

5. Turn off the GT-3.

6. Remove the back cover (6 screws) & ink bay cover (3 screws).

7. Begin to remove the brackets that hold the tubes together including the tube

connector (taking note of placement on each). Keep ready 2 tube caps to seal the

end of the tubes.

G

GT

T

D

DI

IG

GI

IT

TA

AL

L

G

GA

AR

RM

ME

EN

NT

T

P

PR

RI

IN

NT

TE

ER

RS

S

For Technical Assistance Please Call Toll Free

1-877-4BROTHER Email: [email protected]

8. Remove the tube from the needle, and remove the needle (17mm wrench) and

clean/flush the needle.

9. Once the tube is completely removed, take off the spiral, middle tube holders, and

middle tubes, and tube clamp.

10.Mark the new tube according to the tube diagram. The new tube will come with a

coupling.

11.Attach the parts taken off from step 9.

12.Start attaching the new tube starting with the print head side first, then proceeding

with the middle tube holders, and ending with the needle. Take note that the middle

tube holder and middle tube should be installed opening to opening.

13.Move the carriage by hand to make sure there are no “binds” or “kinks” in the tube.

14.Press the platen button to eject the platen.

15.Press the Up/Down button to select “initial” cleaning mode, and then press the okay

button.

16.Press the Up/Down button to select the color you have replaced the tube, and then

press the okay button.

17.The initial cleaning process begins.

18.Press the cancellation button to return to the main menu.

19.Perform a nozzle check (from the test print menu) and do cleanings (normal or

powerful as needed.

20. Attach the covers from step 6.