Bristan Quest User manual

Fitting Instructions & Contents List

Please keep these instructions for future reference and request of replacement parts

Quest/Dune Standard Toilet Seat

Contents Page

1. Introduction 03

2. Safety Note 03

3. Installation 04 - 05

4. Cleaning & Maintenance 06

5. Bristan Guarantee 07

1. Introduction

Thank you for choosing Bristan, the UK’s leading taps and showers expert. We have designed this product with

your enjoyment in mind. To ensure that it works to its full potential, it needs to be fitted correctly. These fitting

instructions have been created to give you all of the information you need and, if you need any further help, please

do not hesitate to give us a call on 0844 701 6273.

2. Safety Note

Please read these instruction thoroughly and retain for future use.

All product manufactured and supplied by Bristan are safe provided they are installed correctly, used correctly and

receive regular maintenance in accordance with these instructions.

These fittings need to be installed in accordance with and meet the requirements of the Water Supply (Water

Fittings) Regulations 1999 and Scottish Byelaws 2004.

Before starting any installation please consider the following:

Prior to drilling into walls, check that there are no hidden electrical

wires, cables or water supply pipes. This can be checked with the aid of

an electronic detector.

If power tools are used do not forget to:

- Wear eye protection

- Unplug equipment after use

SAFETY

NOTE

3. Installation

Please read carefully before attempting to fit the seat. If you are not the end user, please make sure the aftercare

instructions are made available for the end user to read.

A. Basic principle of hinge mechanism (see diagram A). The hinge body assembly is inserted into the hinge

mounting holes in the rear of the seat ring/lid and then bolted to the toilet pan.

B. Adjusting the seat hinges. In order to fit the seat correctly, it is essential to adjust the seat hinges. Adjustment

can be achieved in 2 main ways.

1. Rotation of the hinge discs (see diagram B). By rotating the disc on the underside of the hinge body assembly, it

is possible to adjust the position of the fixing bolts. In addition to this rotating action, by sliding the fixing bolt

up/down the slot in the disc, it is possible to adjust the fixing bolt position further. The combined rotating/sliding

action allows a wide range of fixing positions. This is necessary in order to match the distance between the 2

holes in the toilet pan and to adjust the forward/backward position of the seal.

NOTE:- It is necessary to make sure that the hinge body assemblies are fully inserted into the hinge mounting

holes in the seat (as in diagram A). Failure to do so will result in excessive side to side movement of the seat.

Some side to side movement is perfectly normal.

2. Swapping over the hinge body assemblies (see diagram C1 and C2). It can be seen that the hinge body

assemblies are handed and that the angled bar is positioned off centre in relation to the assembly. By swapping

the hinge bodies over, it is possible to move forward (as in diagram C1) or backwards (as in diagram C2) on the

toilet pan.

C. Bolting the seat to the pan (see diagram A). It is essential that:-

1. All washers are fitting (as in diagram A). NOTE:- That the main seat washer must be fitted the correct way up.

2. The locking nuts are tightened properly. This may require the use of pliers. Failure to adequately tighten the

locking nuts may result in the seat moving around the pan - care must be taken however not over

tighten the nuts as this could either strip the thread in the nut or damage the toilet pan. After a few days

use, check that the nuts are still tight – this is necessary as the washers will slowly compress in the first few days

of use. If the seat lid or ring will not stay in the raised position then move it further on the pan.

Installation continued

4. Cleaning & Maintenance

Your fitting has a high quality finish and should be treated with care to preserve the visible surfaces.

All finishes will wear if not cleaned correctly. The only safe way to clean your product is to wipe with a soft damp

cloth. Stains can be removed using washing up liquid. All bathroom cleaning product (powders and liquids) will

damage the surface of your fitting, even the non-scratch cleaners.

NOTE:- Never use abrasive detergents or disinfectants or those containing alcohol, hydrochloric or phosphoric

acid.

We advise that your fitting is regularly serviced, particularly in hard water areas.

Bristan recommend E-Cloth for cleaning all of our bathroom & kitchen products.

Using just water, E-cloth gives a smear free, deep clean by breaking up and

holding dirt, which normal cloths leave behind. Order through your Bristan stockist.

(ORDER CODE: ECLOTH)

5. Bristan Guarantee

2 year - Pumps, Power Showers

2 year parts. 1 year labour (subject to registration).

Electric Showers/Instantaneous Water Heaters

2 year parts. 1 year labour (subject to registration).

5 year -Taps and Mixers

5 year parts and 1 year labour (subject to proof of purchase).

Shower Valves

5 year parts. 5 year labour (subject to registration), else 1 year with proof of purchase.

Accessories

5 year parts only. Includes bathrooms accessories, shower accessories (e.g. hoses, handsets and

poles), wastes, WC levers and light pulls.

10 year -Shower enclosures, Shower Trays, Sanitary Ware & Furniture

10 year parts (subject to registration), else 2 years with proof of purchase. 1 year labour (subject

to registration), else 1 year with proof of purchase.

This guarantee applies to products purchased within the United Kingdom or Republic of Ireland, but does not apply

to products used commercially.

The guarantee is only available to original purchasers who have proof of purchase.

The installation must allow ready access to all products for the purpose of inspection, maintenance or replacement.

Any part found to be defective during the above guarantee period will be replaced without charge, providing that the

product has been installed in accordance with the instructions, used as intended, and regularly serviced.

Servicing should be carried out at regular intervals of no more than 12 months and more frequently in hard water

areas (heavy lime scale) areas.

In the unlikely event that any problems are encountered with the product’s performance on installation, you must

obtain guidance/authorisation from our Customer Service Department, and be able to supply proof and date of

purchase, before any remedial action is taken.

The guarantee excludes general wear and tear and damage caused by accident, misuse or neglect, and does not

cover the following:

Components that are subject to general wear and tear such as filters, seals, ‘O’ rings and washers etc.

· Damage caused by faulty installation

· Damage caused by lime scale or any waterborne debris

· Damage caused by inappropriate cleaning products (see user instructions)

· Damage caused by the use of non-Bristan parts

· The product being used for a purpose other than intended by the manufacturer.

In the interests of continuous product improvement Bristan reserves the right to alter specification as necessary.

This booklet covers all product codes

SW QST SEAT SH W

SW DN SEAT SH W

Helpline

0844 701 6273

Bristan Group Limited

Birch Coppice Business Park, Dordon, Tamworth, Staffordshire B78 1SG

A Masco Company

Website: www.bristan.com

Telephone: 0844 7016 274 Facsimile: 0844 701 6275

Email: [email protected]

FI (SW QST/DN SEAT SH) – REV. D2

This manual suits for next models

Table of contents

Other Bristan Plumbing Product manuals

Bristan

Bristan Z2 DUS 1/2 C Wiring diagram

Bristan

Bristan SQR KIT01 BLK D2 Wiring diagram

Bristan

Bristan Target TG SNK C User manual

Bristan

Bristan Java J SFSNK EF C User manual

Bristan

Bristan Rio User manual

Bristan

Bristan Blitz Tap Series Wiring diagram

Bristan

Bristan DUL2 SHXARFF C Wiring diagram

Bristan

Bristan Wine Easyfit Wiring diagram

Bristan

Bristan ZI SHXSMCT Wiring diagram

Bristan

Bristan Buzz Wiring diagram

Bristan

Bristan W BASIN14 C Wiring diagram

Bristan

Bristan Artisan AR2 SHXMTFF2 C Mounting instructions

Bristan

Bristan Artisan Wiring diagram

Bristan

Bristan Z TC 1/2 C User manual

Bristan

Bristan Colonial K BRSNK C User manual

Bristan

Bristan AR3 SHCDIV C Wiring diagram

Bristan

Bristan Hourglass HOU BSM C Wiring diagram

Bristan

Bristan N2 SHCDIV G (D7) Wiring diagram

Bristan

Bristan Z2 SQR 1/2 C Wiring diagram

Bristan

Bristan Java J BF C User manual

Bristan

Bristan TY2 SDIV C Mounting instructions

Bristan

Bristan VR1000 User manual

Bristan

Bristan TG SNK C Wiring diagram

Bristan

Bristan Joy care Mounting instructions

Popular Plumbing Product manuals by other brands

Weka

Weka 506.2020.00E ASSEMBLY, USER AND MAINTENANCE INSTRUCTIONS

Kohler

Kohler K-6228 Installation and care guide

UBERHAUS DESIGN

UBERHAUS DESIGN 75175017 Operator's manual

American Standard

American Standard DetectLink 6072121 manual

Uponor

Uponor Contec TS Mounting instructions

Pfister

Pfister Selia 49-SL Quick installation guide

Fortis

Fortis VITRINA 6068700 quick start guide

Fortis

Fortis MILANO 78211JS installation instructions

Kohler

Kohler K-12183 Homeowner's guide

Maxxus

Maxxus MX-M206-01 instruction manual

Moen

Moen 5922 Series installation instructions

Viega

Viega Prevista Pure 8512 Instructions for use

Kohler

Kohler Centerset K-15240 Homeowner's guide

Viega

Viega Prevista Dry 8522.33 Instructions for use

Sanela

Sanela Lema SLP 59RB Instructions for use

Elkay

Elkay EDF15AC Installation, care & use manual

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Instructions for use/assembly instructions

baliv

baliv WT-140 manual