Brickcom FD-100A Series User manual

Megapixel Day & Night

Fixed Dome Network Camera

FD-100A/FD-130A Series

Quick Installation Guide

Quality Service Group

Read Before You Use

1. Power off the camera device

immediately if it starts smoking or smells

unusual.

2. Power off the camera device

immediately if the camera is exposed to

rain or liquid.

3. Do not set the camera device near any

heat sources. (Ex: television and oven)

4. Keep the camera device away from

direct sunlight.

5. Do not set the camera device over the

specific operating temperature.

6. Do not set the camera device in any wet

and humid environments.

7. Do not set the camera device on

unsteady surfaces.

8. Do not attempt to dismantle the camera

device.

9. Do not drop or hit the camera device.

10. Do not use the camera device when

there is lightning.

1. Check Package Contents

a. FD-100A

b. Power Adapter(Optional)

c. Product CD

d. Location Sticker

e. Warranty Card

f. Screws bag

g. Easy Installation Guide

2. Device Description

3. Hardware Installation

3.1 Remove the dome cover from the camera device.

For ceiling installation:

3.2 The user needs the two screws which are included in the product

package and a screwdriver. Mount the camera on the desired

location and use the screwdriver to tighten the screws clockwise

through the two holes on each side of the device as shown below.

The best place to mount the camera is into a ceiling stud.

WARNING: Do not mount the camera on a soft material. The camera may

fall and be damaged.

For wall installation:

3.3 Chose the location on the wall to place the camera. Attach the

location sticker to the desired spot.

3.4 Drill two holes through the center of the two location holes on the

sticker.

3.5 Hammer the two plastic anchors which are provided in the product

package into the two location holes.

3.6 Mount the camera on the wall and position to two screw slots over the

plastic anchors. Insert the screws into the holes and use the

screwdriver to tighten the screws clockwise until they are secure.

3.7 Place the dome cover back on the camera device.

4. Camera Connection

4.1 Basic Connection (Without PoE)

4.1.1 Connect the power adaptor to the camera device.

4.1.2 Connect the camera to the Ethernet hub using a RJ45 Ethernet

cable.

4.2 Power over Ethernet (PoE) Connection

4.2.1 Connect the camera to a PoE-enabled hub via single Ethernet

cable.

4.2.2 Connect the camera to a non-PoE hub via PoE Injector.

5. Adjust the Lens focus range and zoom viewing

5.1 How to adjust the Lens angle?

5.1.1 Release the pan screw and then rotate the lens to left or right.

After completion, tighten the pan screw.

5.1.2 Release the tilt screw on both side of the device and then rotate

the lens to up or down. After completion, tighten the tilt screw.

5.1.3 Release the video adjustment screw and then adjust the lens

direction. After completion, tighten the video adjustment screw.

5.2 How to adjust the view angle and focus range

5.2.1 Release the view angle controller and then moving the

controller bar left or right to adjust the view angle. After

completion, tighten the view angle controller.

5.2.2 Release the focus controller and then moving the controller bar

left or right to adjust the focus range. After completion, tighten the

focus controller.

6. Complete the Installation

6.1 Turn the visible dome cover slowly until it gets the best position.

6.2 Use the screwdriver and attached two dome screws to lock the dome

cover with camera device securely.

Other manuals for FD-100A Series

This manual suits for next models

Table of contents

Other Brickcom Security Camera manuals

Brickcom

Brickcom CB-101A Series User manual

Brickcom

Brickcom FB-100Ae Series Datasheet

Brickcom

Brickcom Fixed Box Series User manual

Brickcom

Brickcom Vandal Dome V2 Series User manual

Brickcom

Brickcom Outdoor Bullet V2 Series Datasheet

Brickcom

Brickcom FD-300Ap series Instructions for use

Brickcom

Brickcom OSD-040 36x Series User manual

Brickcom

Brickcom Mini Box Series User manual

Brickcom

Brickcom PoE Cube CB-101Ap v2.1 User manual

Brickcom

Brickcom MD-100A series User manual

Brickcom

Brickcom Merge FD-300Ap Instructions for use

Brickcom

Brickcom OB-100A User manual

Brickcom

Brickcom MD-500Ap Series User manual

Brickcom

Brickcom VD-100A Instructions for use

Brickcom

Brickcom VD-130Af User manual

Brickcom

Brickcom FD-100A Series User manual

Brickcom

Brickcom Fixed Box FB-100A User manual

Brickcom

Brickcom OB-100A User manual

Brickcom

Brickcom CB-100Ap-0c Datasheet

Brickcom

Brickcom FB-Series Datasheet

Brickcom

Brickcom OB-302Ae V5 Series Instructions for use

Brickcom

Brickcom WCB-100A User manual

Brickcom

Brickcom OSD-040 36x Series User manual

Brickcom

Brickcom OB-E400AF Instructions for use

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications