Bose FreeSpace 360P User manual

Bose®FreeSpace®360P Series II Environmental Speaker

Product Description

The Bose FreeSpace 360P loudspeaker is an 80-watt, full-range environmental loudspeaker with a

360° horizontal dispersion. It is designed for use with standard amplifiers in a variety of applications,

such as shopping malls, outdoor restaurants, resorts and theme parks. It offers the following features:

• An environmental 4.5" (11.4 cm) Bose driver with passive equalization, providing high reliability

and high quality sound for outdoor applications

• A multi-tap line transformer that permits selection of tap settings of 10W, 20W, 40W, or 80W at

the 70V or 100V inputs)

• Freestanding design that blends with the landscaping and permits installation either in ground or

attached to a horizontal concrete or wood surface

Reference Number 263872-SM

REV 02

Electronic copy only

Service Manual

FS360P II Environmental Loudspeaker

Warranty

The Bose®FreeSpace®360P Series II loudspeaker is covered by a 5-year, transferable limited war-

ranty

Caution: The FreeSpace loudspeaker contains no user serviceable parts. To prevent warranty infrac-

tions, refer servicing to warranty service centers or factory service.

Proprietary Information

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF BOSE

CORPORATION WHICH IS BEING FURNISHED ONLY FOR THE PURPOSE OF

SERVICING THE IDENTIFIED BOSE PRODUCT BY AN AUTHORIZED BOSE

SERVICE CENTER OR OWNER OF THE BOSE PRODUCT, AND SHALL NOT

BE REPRODUCED OR USED FOR ANY OTHER PURPOSE.

Specifications

Frequency Range: 70Hz to15kHz (±3dB)

FreeSpace©360P versions: 70V/100V (10W, 20W, 40W, 80W taps)

Sensitivity: 87dB-SPL @ 1W, 1m (pink noise)

Maximum Acoustic Output: 100dB-SPL @ 1m (pink noise)

Dispersion (–6dB point, average,1-4kHz): 360° horizontal; 50° vertical

Long-Term Power Handling: 40W continuous, 80W peak

Mechanical Specifications:

Dimensions: 14.5" (36.83 cm) base diameter; 14.9" (37.85 cm) height

Weight: 14.5 lb (16.58 kg)

Input Connections: External multi-wire cable with wire nuts included

Enclosure Construction: Glass reinforced polypropylene

Mounting Points: Three (3) #10 (M4) holes in base

Contents

Specifications ..................................................................................................................................1

Assembly Part List ..........................................................................................................................2

Packaging Part List - Pair ...............................................................................................................2

Figure 1. Assembly and Packaging View...........................................................................................2

Disassembly Procedures................................................................................................................3

Figure 2. Schematic Diagram ............................................................................................................4

Test Procedures ..............................................................................................................................4

FS360P II Environmental Loudspeaker

Assembly Part List

Packaging Part List - Pair

Note:

1. The crossover PCB is located in the top of the unit and is not accessible for repair or replacement.

2. The transformer is located in the base of the unit and is not accessible for repair or replacment.

Figure 1.Assembly and Packaging View

910

Item

Number

Description Part Number Qty Note

8 CARTON, REG SLOTTED 270555 1

9 OWNERS GUIDE 263873 1

10 CONNECTOR, WIRENUT, 16-22AWG 188199-001 8

11 BAG, POLY, ZIP LOCK, 2 MIL, 3X5" 260556-0305 1 4

12 BAG, POLY, 13X33.5X11.5X3 137847 2 4

Item

Number

Description Part Number Qty Note

1 DRIVER ASSY, 4.5", ENV 289807-001 1

2 GASKET, STRIP, 2.0X5.0X340.0, PSA 291132-340 1

3 DIFFUSER, FS-51 268607 1

4 PROTECTOR, DRIVER, TRANSIT, 4.5 120003 1

5 LOGO CAP, GREEN 268601-1 1

6 SCREW, TF, 8-11X1.25, HEXW HD 296497-020 3 4

7 SCREW, TAPP, 8-11X.5, PAN, XREC/SQ 296495-008 3 4

FS360P II Environmental Loudspeaker

Disassembly Procedures

Flip unit over. Lift off top cap.

Cut the wires close to the driver terminal.Remove three screws then lift up driver.

Remove three screws.

Driver Removal

Top Cap Removal

Note:

1. The crossover PCB is located in the top of the unit

and is not accessible for repair or replacement.

2. The transformer is located in the base of the unit

and is not accessible for repair or replacement.

Lift off diffuser.

FS360P II Environmental Loudspeaker

Test Procedures

Test SetUp

70V version: Apply the positive input signal to

the red wire and the negative to the black wire.

100V version: Apply the positive input signal to

the yellow wire and the negative to the black

wire.

Connect the orange (80W) tap wire to the white

wire. After testing, return the tap setting to what

the customer had set the unit to. See sche-

matic diagram below.

1. Phase Test

1.1 Apply 8 Vdc to the speaker input terminal.

1.2 The driver should move outward.

2. Air Leak Test

2.1 Apply a 35 Vrms, 80 Hz signal to the

speaker input terminal. (Use 50 Vrms for 100V

units)

2.2 Listen for air leaks around the driver, top

cap, and base seams. Repairs can only be

made to the driver.

3. Rub and Tick Test

3.1 Apply a 35 Vrms, 10 Hz signal to the

speaker input terminal. (Use 50 Vrms for 100V

units)

3.2. No extraneous noises such as rubbing,

scraping or ticking should be heard. To distin-

guish between normal suspension noise, rubs

and ticks, displace the cone of the driver with

your finger. If the sound can be made to go

away or get worse, it’s a rub or tick and the

driver should be replaced. If the noise stays

the same, it’s normal suspension noise and

will not be heard with regular program mate-

rial.

4. Sweep Test

4.1 Apply a 35 Vrms, 80 Hz signal to the

speaker input terminal. (Use 50 Vrms for 100V

units). Sweep the speaker from 80 Hz to 5

kHz.

4.2 Listen for buzzes, rattles or other extrane-

ous noises from the driver or cabinet.

100V 70V 80W 40W 20W 10W

TRANSFORMER

COM

RED

YELLOW

BLACK

ORANGE

GREEN

VILOT

BLUE

WHITE

10W

20W

40W

80W

70V

100V

COM

RED

BLACK

PINK

OR

BROWN

PTC

C1 R2

CONNECTOR

R1 6.2 Ohm

C1 15uF

L1 1.5mH

R2 2.7 Ohm

C2 33uF

Figure 2. Schematic Diagram

Note: The transformer and crossover components are not accessible for repair or replacement.

FS360P II Environmental Loudspeaker

Date Revision

Level

Description of Change Change

Driven By

Pages

Affected

04/03 00 Document released at

revision 00.

04/06 00 to 01 Added RoHS part numbers This product is

now built with

RoHS

compliant

parts.

03/07 02 Added driver from strip –

removed non-rohs driver ECN 37167

Service Manual Revision History

Specifications and Features Subject to Change Without Notice

Bose Corporation

The Mountain

Framingham Massachusetts USA 01701

P/N 263872 REV. 03 03/07 (P)

http://serviceops.bose.com

Other manuals for FreeSpace 360P

Table of contents

Other Bose Speakers manuals

Bose

Bose Acoustimass 700 User manual

Bose

Bose RoomMatch RMS215 Instruction Manual

Bose

Bose VIRTUALLY INVISIBLE 191 SPEAKERS User manual

Bose

Bose SoundLink Bluetooth speaker III User manual

Bose

Bose SOUNDLINK REVOLVE User manual

Bose

Bose Acoustic Wave Cannon System II User manual

Bose

Bose 301 Series V User manual

Bose

Bose Computer MusicMonitor User manual

Bose

Bose HOME SPEAKER 500 User manual

Bose

Bose SOUNDLINK REVOLVE +II User manual

Bose

Bose FreeSpace DS 100SE User manual

Bose

Bose 161 Operating and maintenance manual

Bose

Bose ArenaMatch Utility AMU105 User manual

Bose

Bose 300PM User manual

Bose

Bose SoundTouch 20 User manual

Bose

Bose 37471 User manual

Bose

Bose MediaMate Computer Speakers User manual

Bose

Bose 302 A Assembly instructions

Bose

Bose 301 II Series User manual

Bose

Bose VIRTUALLY INVISIBLE 300 User manual

Bose

Bose SoundTouch 30 Series III User manual

Bose

Bose TVS User manual

Bose

Bose SOUNDLINK REVOLVE II User manual

Bose

Bose SOUNDLINK MICRO Installation guide

Popular Speakers manuals by other brands

argon audio

argon audio IE20 quick start

Denon

Denon SC-N7 owner's manual

Gemline

Gemline Ace 3952 user manual

Focal

Focal ON WALL 300 User manua

HEADRUSH

HEADRUSH Maximus HRSP 5024 manual

SoundLogic

SoundLogic BCCS-6/6395 instruction manual

Peavey

Peavey DTH 218 Specification sheet

Avantree

Avantree Pluto Air user guide

Morel

Morel Integra Series INTEGRA OVATION 4 install guide

Oppo

Oppo SONICA quick start guide

Rocksteady

Rocksteady Stadium owner's manual

Bowers & Wilkins

Bowers & Wilkins 4 owner's manual

Sonance

Sonance SONOS OUTDOOR Series installation manual

Electro-Voice

Electro-Voice EVID FM4.2 Brochure & specs

Pioneer

Pioneer XW-HTD630 manual

Onn

Onn BWA16AA002 Product guide

HP GL313AA - USB Speakers PC Multimedia quick start guide

Tannoy

Tannoy SYSTEM 600a user manual