Bosch MIC-9502 User manual

MIC IP fusion 9000i

MIC-9502

en User Manual

MIC IP fusion 9000i Table of contents | en 3

Bosch Security Systems User Manual 2017.11 | 0.20 | F.01U.349.011

Table of contents

1Browser connection 6

1.1 Systems requirements 6

1.2 Establishing the connection 6

1.3 Password protection in camera 6

2System overview 8

2.1 Live page 8

2.2 Configuration 8

2.3 Playback 8

3Operation via the browser 9

3.1 Live page 9

3.1.1 Connection 9

3.1.2 PTZ 9

3.1.3 Pre-positions 10

3.1.4 AUX Control 10

3.1.5 Intelligent Tracking 10

3.1.6 Special Functions 10

3.1.7 Recording status 11

3.1.8 Saving snapshots 11

3.1.9 Recording live video 11

3.1.10 Full-screen display 11

3.1.11 Video Security App 11

3.1.12 Date and Time 11

3.1.13 Audio communication 11

3.1.14 Storage, CPU and network status 12

3.1.15 Status icons 12

3.2 Playback via browser 13

3.2.1 Selecting the recording stream 13

3.2.2 Searching for recorded video 13

3.2.3 Exporting recorded video 13

3.2.4 Controlling playback 13

4General 15

4.1 Identification 15

4.2 User Management 15

4.3 Date/Time 16

4.4 Display Stamping 17

4.5 GB/T 28181 19

5Web Interface 21

5.1 Appearance 21

5.2 LIVE Functions 23

6Camera 24

6.1 Installer Menu 24

6.1.1 Positioning 24

6.2 Encoder Profile 27

6.3 Encoder Streams 30

6.4 Privacy Masks 32

6.5 Picture Settings 33

6.6 Picture Settings Thermal 36

6.7 Lens Settings 38

4en | Table of contents MIC IP fusion 9000i

2017.11 | 0.20 | F.01U.349.011 User Manual Bosch Security Systems

6.8 PTZ Settings 39

6.9 Scene Mode Scheduler 41

6.10 Pre-positions and Tours 41

6.11 Pre-position mapping 41

6.12 Sectors 41

6.13 Miscellaneous 42

6.14 Wiper/Washer 42

6.15 Audio 42

6.16 Pixel Counter 43

7Recording 44

7.1 Introduction to Recording 44

7.2 Storage Management 44

7.2.1 Device manager 44

7.2.2 Recording media 44

7.2.3 Activating and configuring storage media 45

7.2.4 Formatting storage media 45

7.2.5 Deactivating storage media 45

7.3 Recording Profiles 45

7.4 Maximum Retention Time 47

7.5 Recording Scheduler 47

7.6 Recording Status 48

8Alarm 49

8.1 Alarm Connections 49

8.2 Video Content Analysis (VCA) 51

8.3 Virtual Masks 52

8.4 Audio Alarm 53

8.5 Alarm E-Mail 53

8.6 Alarm Task Editor 54

8.7 Alarm Rules 55

9Interfaces 56

9.1 Alarm Inputs 56

9.2 Alarm Outputs 56

9.3 COM1 57

10 Network 58

10.1 Network Services 58

10.2 Network Access 58

10.3 DynDNS 60

10.4 Advanced 61

10.5 Network Management 62

10.6 Multicast 63

10.7 Image Posting 64

10.8 Accounts 64

10.9 IPv4 Filter 65

10.10 Encryption 65

11 Service 66

11.1 Maintenance 66

11.2 Licenses 66

11.3 Certificates 66

11.4 Logging 67

MIC IP fusion 9000i Table of contents | en 5

Bosch Security Systems User Manual 2017.11 | 0.20 | F.01U.349.011

11.5 Diagnostics 67

11.6 System Overview 67

12 Using your MIC Camera 68

12.1 Recommended Use of Your MIC Camera 68

12.2 Using Intelligent Tracking 69

12.3 Uploading a User Logo 72

12.4 Azimuth, Elevation, and Compass Directions 73

12.5 Using the Wiper/Washer (Bosch Protocol) 74

12.6 Using the Wiper/Washer (Pelco Protocol) 75

12.7 Flat Field Correction on Thermal Cameras 76

13 Understanding the Fusion Feature 77

13.1 Video content analytics on the Live page 78

13.2 VCA marks on the live image 78

14 Troubleshooting 81

15 Status Codes 85

16 AUX Commands 90

6en | Browser connection MIC IP fusion 9000i

2017.11 | 0.20 | F.01U.349.011 User Manual Bosch Security Systems

1 Browser connection

A computer with Microsoft Internet Explorer is used to receive live images, control the unit,

and replay stored sequences. The unit is configured over the network using the browser.

1.1 Systems requirements

Our recommendations are:

– Computer with Intel Skylake processor or better

– Intel HD530 graphic card with performance that matches or is better than the resolution

of the camera

– Windows7 or later operating system

– Network access

– Internet Explorer version 11 or later

– or –

Application software, for example, VideoSecurityClient, BoschVideoClient or Bosch

Video Management System.

Note:

To see live images in your browser it might be necessary to download and install the MPEG-

ActiveX from the Bosch download store.

1.2 Establishing the connection

The unit must have a valid IP address to operate on your network and a compatible subnet

mask.

By default, DHCP is pre-set at the factory to On plus Link-Local so a DHCP server assigns an

IP address or, if no DHCP server is available, a link-local address (auto-IP) is assigned within

the range 169.254.1.0 to 169.254.254.255.

You can use IP Helper or Configuration Manager to find the IP address. Download the software

from http://downloadstore.boschsecurity.com.

1. Start the Web browser.

2. Enter the IP address of the unit as the URL.

3. During initial installation, confirm any security questions that appear.

If a RADIUS server is used for network access control (802.1x authentication), you must

configure the device before the device can communicate with the network.

To configure the device, connect it directly to a computer using a network cable and then set

the service-level password.

Note:

If you cannot connect, the unit may have reached its maximum number of connections.

Depending on the device and network configuration, each unit can have up to 50 web browser

connections, or up to 100 connections via BoschVideoClient or Bosch Video Management

System.

1.3 Password protection in camera

The device is password-protected. The first time that any user accesses the device, the device

will prompt the user to set a password at the service level.

The camera requires a strong password. Follow the prompts in the dialog box, which specifies

what is required. The system measures the strength of the password that you enter.

MIC IP fusion 9000i Browser connection | en 7

Bosch Security Systems User Manual 2017.11 | 0.20 | F.01U.349.011

When you use Configuration Manager to access your device for the first time, you must set the

initial password of the device in Configuration Manager. The Users section (General > Unit

Access > Users) displays the message, "Before you can use this device you have to secure it

with an initial password."

Note: After you set the initial password, a "lock" icon appears next to the device name in the

Devices list in Configuration Manager.

You can also launch the device webpage directly. In the device webpage, an initial password

page appears, displaying input fields and a password strength gauge.

Enter the user name (“service”) and a password in the appropriate fields. Refer to the section

User Management for more information.

After a service-level password is set for the device, the device displays a dialog box that

prompts users to enter the user name (“service”) and the service-level password every time

that they access the device.

1. Fill in the fields User name and Password.

2. Click OK. If the password is correct, the desired page appears.

8en | System overview MIC IP fusion 9000i

2017.11 | 0.20 | F.01U.349.011 User Manual Bosch Security Systems

2 System overview

When a connection is established, the Live page is initially displayed.

The application bar displays the following icons:

Live To view the live video stream, click this icon.

Playback To play back recorded sequences, click this icon.

This link is only visible if a storage medium has been

configured for recording. (With VRM recording this

option is not active.)

Configuration To configure the unit, click this icon.

Links To navigate to the Bosch download store, click this

icon.

To get context sensitive help for a particular page, click

this icon.

Note: None of the pages are accessible until after you set a service-level password.

2.1 Live page

The Live page is used to display the live video stream and control the unit.

2.2 Configuration

The Configuration page is used to configure the unit and the application interface.

Making Changes

Each configuration screen shows the current settings. You can change the settings by entering

new values or by selecting a predefined value from a list field.

Not every page has a Set button. Changes to pages without a Set button are set immediately.

If a page does show a Set button, you must click the Set button for a change to take effect.

Notice!

Save each change with the associated Set button.

Clicking the Set button saves the settings only in the current field. Changes in any other fields

are ignored.

Some changes only take effect after the unit is rebooted. In this case, the Set button changes

to Set and Reboot.

1. Make the desired changes.

2. Click the Set and Reboot button. The camera reboots and the changed settings are

activated.

All settings are backed up in camera memory so they are not lost even if the power fails. The

exception is the time settings, which are lost after 1 hour without power if no central time

server is selected.

2.3 Playback

The Playback page is used for playing back recorded sequences.

MIC IP fusion 9000i Operation via the browser | en 9

Bosch Security Systems User Manual 2017.11 | 0.20 | F.01U.349.011

3 Operation via the browser

3.1 Live page

3.1.1 Connection

Video

Select the appropriate camera from which to view live video.

Camera 1 is the visible image, and Camera 2 is the thermal image.

Stream

Select the appropriate live video stream.

Stream 1

Select this option to display stream 1 of the camera.

Stream 2

Select this option to display stream 2 of the camera.

M-JPEG

Select this option to display the M-JPEG stream of the camera.

3.1.2 PTZ

Pan and tilt controls

– To tilt the camera up: Click and hold the up arrow.

– To tilt the camera down: Click and hold the down arrow.

– To pan the camera left: Click and hold the left arrow.

– To pan the camera right: Click and hold the right arrow.

– To pan and tilt the camera at the same time (variable pan/tilt): Click and drag the center

area (that resembles a point stick or a trackball on a computer keyboard) around the PTZ

control in the direction that you want to move the camera.

Notice!

If the camera will not pan in either direction, or pans in one direction only, refer to the “Error

Codes” section of the manual.

Zoom

Click the + button to zoom in.

Click the - button to zoom out.

Iris

Click (Iris close) to close the iris.

Click (Iris open) to open the iris.

Focus

Click to focus near.

Click to focus far.

10 en | Operation via the browser MIC IP fusion 9000i

2017.11 | 0.20 | F.01U.349.011 User Manual Bosch Security Systems

3.1.3 Pre-positions

The camera displays Pre-position 1 through Pre-position 6. Select the appropriate pre-

position to view the video image for that pre-position/scene. In the lower left of the video

image, the OSD displays the Camera number (title), the Pre-position number, and the Pre-

position number stored.

Below the list of pre-positions/scenes is a drop-down list showing the stored pre-positions/

scenes.

Select the appropriate pre-position (1 through 6). Click to store the pre-position.

Note: If the pre-position is already stored, a dialog box displays the message, “Overwrite

current pre-position?” Click OK to overwrite, or click Cancel to cancel the operation.

Click to display the selected pre-position in the video image.

3.1.4 AUX Control

With the tab AUX Control you can enter pre-programmed keyboard control commands. These

commands are composed of a command number plus the appropriate function key (Show pre-

position, Set pre-position, AUX on, or AUX off). A valid combination either issues a command

to the device or displays an on-screen menu.

(Refer to the “Keyboard Commands“ section of the manual for a list of all AUX commands for

your camera.)

Show pre-position

Click this button to display a pre-position.

Set pre-position

Click this button to set a pre-position.

AUX on

Click this button to activate an AUX command.

AUX off

Click this button to deactivate an AUX command.

3.1.5 Intelligent Tracking

Options for tracking objects within the region of interest appear in the panel.

When Intelligent Tracking is active, the tracking icon appears on the image along with

the lines that track moving objects.

Select Off, Auto or Click. If Click is selected, click on an object to track it.

3.1.6 Special Functions

Scan 360°

Click this button to start a continuous 360° pan. To stop the continuous pan, click a

directional control in the View Control tab.

Autopan

Click this button to pan the camera between user-defined limits.

Tour A / Tour B

Click one of these buttons to start the continuous playback of a recorded (guard) tour. A

recorded tour saves all manual camera movements made during the recording, including its

rate of pan, tilt and zoom speeds, and other lens setting changes.

To stop a tour, click a directional control in the View Control tab.

Note: Tour B is now intended for use with the 'IVA while moving' functions.

This manual suits for next models

Table of contents

Other Bosch Security System manuals

Bosch

Bosch DIVAR DIP-6080-00N User manual

Bosch

Bosch LTC 9441 Series User manual

Bosch

Bosch HSG9483 Series User manual

Bosch

Bosch Plena PLE-1CS Reference guide

Bosch

Bosch ITS-SPDIAL-FR User manual

Bosch

Bosch DIP-3040-00N User manual

Bosch

Bosch ICP-VR8488 User manual

Bosch

Bosch DIVAR IP 7000 2U User manual

Bosch

Bosch CC610PB User manual

Bosch

Bosch ICP-VR8488 User manual

Bosch

Bosch PRAESENSA PRA-SCL Instruction sheet

Bosch

Bosch MBV-BPRO-45 Instruction sheet

Bosch

Bosch ISC-BDL2-WP12 User manual

Bosch

Bosch FMC-210-DM-G-B User manual

Bosch

Bosch LTC 2682/90 Series User manual

Bosch

Bosch SE 60 LSNi User manual

Bosch

Bosch DIP-6083-8HD User manual

Bosch

Bosch DS7400XiV4-EXP User manual

Bosch

Bosch DB-CO User manual

Bosch

Bosch Radion B810 User manual

Bosch

Bosch LBB 1946 User manual

Bosch

Bosch Security Systems User manual

Bosch

Bosch DS840LSN User manual

Bosch

Bosch PVA-1EB User manual

Popular Security System manuals by other brands

Inner Range

Inner Range Concept 2000 user manual

Climax

Climax Mobile Lite R32 Installer's guide

CADDX

CADDX NX-6 user manual

FBII

FBII XL-31 Series installation instructions

Johnson Controls

Johnson Controls PENN Connected PC10 Install and Commissioning Guide

Aeotec

Aeotec Siren Gen5 quick start guide

Blaupunkt

Blaupunkt SA 2700 quick start guide

IDEAL

IDEAL Accenta Engineering information

AJAX

AJAX DoubleButton user manual

Swann

Swann SW-P-MC2 Specifications

Ecolink

Ecolink Siren+Chime user manual

Digital Monitoring Products

Digital Monitoring Products XR150 user guide

EDM

EDM Solution 6+6 Wireless-AE installation manual

Highway Safety Group

Highway Safety Group EA401 user manual

Siren

Siren LED GSM operating manual

Detection Systems

Detection Systems 7090i Installation and programming manual

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 instructions

Siemens

Siemens FDM273 manual