Bosch AMAX 2100 Instruction manual

AMAX panel

AMAX panel 2100 | AMAX panel 3000 | AMAX panel 3000 BE | AMAX panel 4000

en Quick Start Manual

Table of contents

1Safety 4

2Short information 6

3System overview 7

4Connecting Modules and Devices 10

5Programming and Operating the AMAX System 11

5.1 Option: Changing Menu Language 11

5.2 Accessing the Menus 11

5.3 Menu Navigation 11

5.4 Programming the AMAX System via Keypad 12

5.4.1 Setting Date and Time 12

5.4.2 Deleting a Zone 12

5.4.3 Enabling the RF Receiver for Wireless Communication 13

5.4.4 Setting up a Zone for an RF Device 13

5.5 Programming the AMAX Sytem via PC and USB 14

5.5.1 Installing the Programming Software 14

5.5.2 Connecting the PC and the AMAX Panel 14

5.5.3 Starting the Programming Software 14

5.5.4 Setting the COM Port 15

5.5.5 Option: Creating a New Customer 17

5.5.6 Configuring the Control Panel 18

5.5.7 Establishing a Direct Connection 21

5.6 Menu Programming 22

6Technical Data 32

AMAX panel Table of Contents | en 3

Bosch Sicherheitssysteme GmbH Quick Start Manual 2015.05 | 05 | F.01U.309.297

Safety

Danger!

Electricity

Injuries due to electricity are possible if the system is not operated correctly or if the system

is opened or modified not accordingly to this manual.

– Disconnect all Telecommunication Network Connectors before switching off the power.

– To switch off the power, make sure to have a circuit breaker available.

– Make sure that the system is switched off during the installation and wiring process.

– Only open or modify the system accordingly to this manual.

– Make sure to connect the system to a socket-outlet with a protective grounding contact.

– Only qualified installers /service personnel are allowed to install this system.

Danger!

Battery

Injuries due to electric shock, fire or explosion are possible if the battery is handled or

connected incorrectly.

– Always handle the battery carefully and replace it carefully.

– Make sure that the grounding terminal is always connected and that N, L1 or xx are

connected correctly.

– Make sure to first disconnect the positive wire of the battery when removing it from the

system.

– Be careful when connecting the positive (red) wire and the "BATT +" port of the system.

Make sure not to short-circuit with the "BATT +" port of the AMAX panel or the housing to

prevent electric arc from occurring.

Danger!

Electrostatic-sensitive components

Injuries due to electric shock are possible if anti-static steps are not followed.

– Always contact the grounding terminal before installing the system to discharge the

possibly carried static electricity.

Caution!

Sensitive components

Damage of sensitive components is possible if the system is not handled carefully or if the

system is opened or modified not accordingly to this manual.

– Always handle the system carefully.

– Only open or modify the system accordingly to this manual.

Caution!

Battery

Damage or contamination of the system is possible if the battery is not handled correctly or if

the battery is not replaced on a regular basis.

– Only use a non-spillable battery.

– Place a label with the last replacement date on the battery.

4en | Safety AMAX panel

2015.05 | 05 | F.01U.309.297 Quick Start Manual Bosch Sicherheitssysteme GmbH

– Under normal conditions of use, replace the battery every 3-5 years.

– Recycle the battery after replacement according to local regulations.

Caution!

Installation

Damage or malfunction of the system is possible if the system is not mounted and installed

correctly.

– Place the system inside the monitored area on a stable surface.

– Make sure to mount keypads on the inner side of the monitored area.

– Once the system is tested and ready to use, secure the enclosure door and additional

enclosures with screws.

Caution!

Maintenance

Damage or malfunction of the system is possible if it is not maintained on a regular basis.

– It is recommended to test the system once a week.

– Make sure to get the system maintained four times a year.

– Only qualified installers /service personnel are allowed to maintain this system.

AMAX panel Safety | en 5

Bosch Sicherheitssysteme GmbH Quick Start Manual 2015.05 | 05 | F.01U.309.297

Short information

This Quick Start Guide contains information on how to get the system into operation easily

and quickly. The guide describes the main steps required for basic system installation and

setup of an AMAX panel together with one IUI-AMAX4-TEXT keypad and one RFRC-OPT

RADION receiver. The program tree structure is provided at the end of this guide.

Detailed information about installation of other modules and devices, advanced settings and

programming can be found in the Installation Guide. For detailed operation information,

please refer to the User Guide.

6en | Short information AMAX panel

2015.05 | 05 | F.01U.309.297 Quick Start Manual Bosch Sicherheitssysteme GmbH

System overview

DX2010

Option Bus

B426

A-Link Plus CMS

Ethernet

Video

DX4020G

PSTN GSM/

GPRS

AMAX 3000

AMAX 2100 / 3000

Radion

DX3010

Text KeypadLCD / LED Keypad

DX4010V2

B450

(B442/B443)

GPRS

Figure 3.1: AMAX 2100 / 3000 Overview

DX2010

Option Bus

B426

A-Link Plus CMS

Video

PSTN

Radion

DX3010

Text KeypadLCD / LED Keypad

DX4020G

GSM/

GPRS

DX4010V2

B450

(B442/B443)

GPRS

Ethernet

Figure 3.2: AMAX 3000 BE / 4000 Overview

AMAX panel System overview | en 7

Bosch Sicherheitssysteme GmbH Quick Start Manual 2015.05 | 05 | F.01U.309.297

Wiring diagrams

/ B450

≤ 500mA

Figure 3.3: Wiring diagram AMAX 2100 / 3000

8en | System overview AMAX panel

2015.05 | 05 | F.01U.309.297 Quick Start Manual Bosch Sicherheitssysteme GmbH

Program Key Port

GND

A C

Transformer

Battery

Tamper

L2 COM COM COM

L1a L3 L4 L5 L6 L7 L8

COM

L10

L11

L12

L13

L14

L15

L16

P0+4

AUX1

AUX2

AUX1

+12V

RINGRHTHTIP

L1b

P0+3

P0+

P0-2

P0-1

Zones

Bosch Option

Bus2 < 900mA

+12V

+0 V

1 Tamper Switch

2 Zone Switch

3 EOL 2,2 k

4 NO + NC

Fuse 1 A

PO+4: < 750mA

PO+3: < 750mA

PO -2: < 500mA

PO -1: < 500mA

230V ~50Hz

230mA

Wachdog

output

<100mA

12V < 18Ah

18VAC@50VA

Zones

AUX 1: < 900mA

AUX 2: < 900mA

AUX Power

Fire

Intrusion

Slow flash: Normal state

On: Trouble state

Off: Trouble state

+12V

COM

12V 7Ah

AUX2

+12V

COM

supervised

PO-5

Keypads:

IUI-AMAX4-TEXT

IUI-SOL-TEXT

IUI-AMAX3-LED16

IUI-AMAX3-LED8

Keypads:

IUI-AMAX-LED8

IUI-AMAX-LCD8

I/O Moduls:

DX2010 Adr. 103 - 108

DX3010 Adr. 150 - 151

DX4010 Adr. 253

Communicators:

DX4020G Adr. 134

B426 / B450 Adr. 134(6) / 250(9)

RF Receiver:

RF3227E 1=

RFRC-OPT 1= (1)

1 =

3 =

4 =

Bosch Option

Bus1 < 900mA

COM

BGY

♥

IUI-AMAX3 +4 Keypad

Factory

Default

5-16 Inst. Guide

2000mA

100 Ω - 2,2 k

∑

Figure 3.4: Wiring diagram AMAX 3000 BE / 4000

AMAX panel System overview | en 9

Bosch Sicherheitssysteme GmbH Quick Start Manual 2015.05 | 05 | F.01U.309.297

Connecting Modules and Devices

The AMAX panel provides BOSCH option bus 1 and option bus 2 (only for AMAX 3000 BE and

AMAX 4000) to connect modules and devices. Each module can be connected to each bus.

A maximum of 14 modules (8 keypads) can be connected to each bus.

The following overview displays the maximum number of modules that can be connected.

Module AMAX 2100 AMAX 3000 /

3000 BE

AMAX 4000

Keypads 4 8 16

DX2010 - 3 6

DX3010 1 2

DX4010 1

GPRS module:

B450 with B442 or B443, DX4020-

Up to 2 different GPRS modules, each GPRS module can

only be connected once. Exception: 2 B450 modules can

be connected.

IP module:

B426

2 (1 if one of the GPRS modules above is connected, 0 if

two of the GPRS modules above are connected)

RF receiver - 1

Table 4.1: Maximum number of modules

How to connect a keypad and a RADION receiver:

1. Connect the keypad to the option bus on the AMAX panel according to the wiring diagram

(refer to Graphics).

2. Connect the RFRC-OPT RADION receiver to the option bus on the AMAX panel according

to the wiring diagram (refer to Graphics).

3. Connect the red and black wires supplied with the battery to the AMAX panel and the

battery.

4. Connect the power adapter and battery to the mains.

10 en | Connecting Modules and Devices AMAX panel

2015.05 | 05 | F.01U.309.297 Quick Start Manual Bosch Sicherheitssysteme GmbH

Other manuals for AMAX 2100

This manual suits for next models

Table of contents

Other Bosch Security System manuals

Bosch

Bosch LTC 1311/20 FlexiDome I User manual

Bosch

Bosch B Series User manual

Bosch

Bosch BE 300 LSN User manual

Bosch

Bosch AMAX 2100 Instruction manual

Bosch

Bosch ICP-VR8488 User manual

Bosch

Bosch ISN-SM-30 User guide

Bosch

Bosch Praesideo User manual

Bosch

Bosch DIP-2040-00N User manual

Bosch

Bosch Security Systems User manual

Bosch

Bosch LTC 2682/90 Series User manual

Bosch

Bosch Security Systems User manual

Bosch

Bosch FK 100 LSN User manual

Bosch

Bosch D1260 Series User manual

Bosch

Bosch Plena Power Amplifier User manual

Bosch

Bosch PRAESENSA User manual

Bosch

Bosch TC2073 User manual

Bosch

Bosch Radion B810 User manual

Bosch

Bosch FMC-210-DM-G-R User manual

Bosch

Bosch DS7400Xi User manual

Bosch

Bosch DS7400XiV4-EXP User manual

Bosch

Bosch DIVAR DIP-6080-00N User manual

Bosch

Bosch 7100 User manual

Bosch

Bosch Security Systems User manual

Bosch

Bosch ICP-CP508 User manual

Popular Security System manuals by other brands

Inner Range

Inner Range Concept 2000 user manual

Climax

Climax Mobile Lite R32 Installer's guide

CADDX

CADDX NX-6 user manual

FBII

FBII XL-31 Series installation instructions

Johnson Controls

Johnson Controls PENN Connected PC10 Install and Commissioning Guide

Aeotec

Aeotec Siren Gen5 quick start guide

Blaupunkt

Blaupunkt SA 2700 quick start guide

IDEAL

IDEAL Accenta Engineering information

AJAX

AJAX DoubleButton user manual

Swann

Swann SW-P-MC2 Specifications

Ecolink

Ecolink Siren+Chime user manual

Digital Monitoring Products

Digital Monitoring Products XR150 user guide

EDM

EDM Solution 6+6 Wireless-AE installation manual

Highway Safety Group

Highway Safety Group EA401 user manual

Siren

Siren LED GSM operating manual

Detection Systems

Detection Systems 7090i Installation and programming manual

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 instructions

Siemens

Siemens FDM273 manual