Black BLK-CWD208VH2 User manual
High Performance 690 TVL
Indoor/Outdoor Color CCTV Dome Camera
User Manual
Products: BLK-CWD208VH2, BLK-CWD228VH2
Please read this manual before using your camera, and always follow the instructions
for safety and proper use. Save this manual for future reference.
BLK-690TVL_DomeCameras-2_CM
10/02/2012
ii
WARNING
!Changes or modications not expressly approved by the manufacturer could void the user’s authority to operate the
equipment.
CAUTION
To prevent electric shock and risk of re hazards:
Use a power source that is within specication only.
Do NOT expose this appliance to rain or moisture.
REGULATORY NOTICE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and use in
accordance with the instructions, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause interference, in which case the user will be
required to correct the interference at his own expense.
LEGAL NOTICE
Observint Technologies (Observint) products are designed to meet safety and performance standards with the use
of specic Observint authorized accessories. Observint disclaims liability associated with the use of non-Observint
authorized accessories.
The recording, transmission, or broadcast of any person’s voice without their consent or a court order is strictly
prohibited by law.
Observint makes no representations concerning the legality of certain product applications such as the making,
transmission, or recording of video and/or audio signals of others without their knowledge and/or consent. We
encourage you to check and comply with all applicable local, state, and federal laws and regulations before
engaging in any form of surveillance or any transmission of radio frequencies.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks
and names or their products. Observint disclaims any proprietary interest in trademarks and trade names other than
its own.
No part of this document may be reproduced or distributed in any form or by any means without the express written
permission of Observint.
© 2012 by Observint Technologies, Inc. All Rights Reserved.
11000 N. Mopac Expressway , Building 300, Austin, TX 78759
For Sales and Support, please contact your distributor.
iii High Performance 690 TVL CCTV Dome Camera User Manual
Table of Contents
Precautions ............................................................................. iv
SECTION 1 Introduction .......................................................................1
Features .................................................................................1
1.1 Cameras with a vandalproof enclosure ..................................................2
1.2 Cameras with a plastic enclosure .......................................................3
SECTION 2 Installation ........................................................................4
2.1 General Guidelines ...................................................................4
2.2 Vandalproof camera mounting .........................................................5
2.3 Plastic camera mounting ..............................................................6
2.4 Camera adjustments .................................................................6
2.5 Cleaning ............................................................................7
SECTION 3 Software Setup .....................................................................8
3.1 PRESETS ............................................................................8
3.2 EXPOSURE.. .........................................................................8
3.3 WDR ..............................................................................11
3.4 WHITE BALANCE ....................................................................12
3.5 DAY/NIGHT .........................................................................13
3.6 IMAGE ADJ.. ........................................................................14
3.7 SPECIAL ...........................................................................15
VIDEO STANDARD ........................................................................17
SECTION 4 Specications .....................................................................21
APPENDIX A Troubleshooting ...................................................................22
APPENDIX B Camera Dimensions ................................................................23
Camera with vandalproof housing ..........................................................23
Camera with plastic housing ...............................................................23
iv
PRECAUTIONS
Precautions
Do not install the camera in extreme temperature conditions. Use the camera in environments where temperature is
between 14°F and 122°F. Ensure adequate ventilation.
Do not install or use the camera in an environment where the humidity is high. It can degrade the image quality.
Do not install the camera under unstable lighting conditions. Severe lighting changes or icker can cause the camera to
work improperly.
Never use the camera close to a gas or oil leak. These chemicals can damage the camera.
Do not drop the camera or subject it to physical shocks. These can cause malfunctions to occur.
Never point the camera at intense light. Smear or blooming may occur, and it can damage the CCD.
Do not expose an indoor camera to rain or spill liquids on it. If it gets wet, wipe it dry immediately. Liquids can contain
minerals that corrode electronic components.
Check the power source to ensure that it is within specications before connecting it to the camera.
1 High Performance 690 TVL CCTV Dome Camera User Manual
SECTION 1: INTRODUCTION
SECTION 1
Introduction
These high performance indoor/outdoor CCTV dome cameras feature a very high resolution Pixim® 1/3” High Sensitivity Digital
sensor providing 690 TVL (color), with a 2.8 – 11 mm lens, a digital wide dynamic range, dual voltage range support (24 Vac, 12
Vdc), and on-screen display (OSD) for control and setup. These cameras are available in either a durable plastic or vandalproof
enclosure.
Features
• Wall or ceiling mounting through 3-axis camera bracket
• Vandalproof enclosures are IP67 rated and constructed with die-cast aluminum
• Flush/surface mountable using the supplied mount adaptor
• Safety strap keeps dome cover attached while making adjustments
• Pixim 1/3” High Sensitivity Digital Sensor
• High resolution 690 TV Lines Color, 800 TV Lines B&W
• Day or day/night operation (ICR)
• Varifocal lens 2.8 – 11 mm
• True wide dynamic range
• Digital noise reduction
• Privacy mask function
• On screen display (OSD)
• Motion detection
• High light compensation
Joystick /
OSD Control
Lens Controls
Inside Housing
Lens Controls
Access Door
Lens
Assembly
Video Out
Tilt/Pan
Gimbal
Gimbal
tilt lock
Power/video
drop cable
Internal Components
2
Focus
Adjustment
Zoom
Adjustment
Lens Controls
Access Door
Lens
Housing
Gimbal
tilt lock
Lens Controls
1.1 Cameras with a vandalproof enclosure
1.1.1 What’s in the box
Your camera includes the following:
• Security tool
• Machine screws (4)
• Mounting cap
• Mounting screws (4)
• L-wrench
• User manual
• Dome bracket (optional)
What’s in the box
SECTION 1: INTRODUCTION
3 High Performance 690 TVL CCTV Dome Camera User Manual
SECTION 1: INTRODUCTION
Optional dome bracket for wall and ceiling mounting
1.2 Cameras with a plastic enclosure
1.2.1 What’s in the box
Your camera includes the following:
• Mounting screws (4)
• L-wrench
• User manual
• Dome bracket (optional)
What’s in the box
Optional dome bracket
4
SECTION 2: INSTALLATION
SECTION 2
Installation
2.1 General Guidelines
• Outdoor installations: Use the rubber rings included with the machine screws (4) to ensure that the unit is sealed properly.
Dome cover
Rubber seal
Machine screw
Dome base
• Dome/window care: Handle the dome carefully to prevent scratching. If a scratch appears over the lens, adjust the dome
window to move the scratch out of view.
CAUTION
Keep dome cover and camera lens clean. To avoid smearing, do not expose the camera lens to a strong light source such as the
sun or spot lights.
• Monitor impedance: Set the monitor impedance switch to 75Ω.
• Power supply: To avoid re or shock hazard, use only a UL® listed power supply.
• Camera drop cable: The camera drop cable includes two connectors:
—Power connector (black with green terminal adapter) – The connector is non-polarized. Use 24 Vac power source
(AC24V 1A adapter) or 12 Vdc power source (DC12V 1A adapter).
—Video coax connector (BNC, yellow) – for transmission of the video signal across coax (75 Ω) cable.
5 High Performance 690 TVL CCTV Dome Camera User Manual
SECTION 2: INSTALLATION
Power Connector
Video Coax
Connector
2.1.1 What you need
To install the camera you will need:
• 12 Vdc or 24 Vac power source
• Tools for mounting the camera
2.2 Vandalproof camera
mounting
The camera can be installed on a junction box or directly to a wall
or ceiling.
1. Attach the surface mount bracket to the ceiling or wall
using four (4) mounting screws.
2. Connect the dome base to the surface mount bracket using
the screws with rubber rings provided.
3. Route the power and video cables to the camera location
and attach them to the camera drop cable (see General
guidelines above).
4. Attach the dome base to the surface mount bracket using
the four machine screws provided.
6
SECTION 2: INSTALLATION
2.3 Plastic camera mounting
1. Connect the dome base to the mounting surface using four
(4) screws.
2. Route the power and video cables to the camera location
and attach them to the camera drop cable (see General
guidelines above).
2.4 Camera adjustments
1. Attach a video setup monitor to the yellow RCA (EXTRA VIDEO OUT) connector inside the camera assembly, or setup a
remote monitor for viewing video from the camera.
2. Power on the camera and video monitor.
3. While observing video from the camera, adjust the pan/tilt swivel and PCB bracket to aim the camera in the preferred
direction.
Pan adjustment (rotate gimbal) Tilt adjustment
This manual suits for next models
1
Table of contents
Other Black Security Camera manuals
Black
Black BLK-HDC10M User manual
Black
Black BLK-HDM1IR User manual
Black
Black BLK-CPD700 User manual
Black
Black BLK-CWD208VH User manual
Black
Black BLK-CWD208VH User manual
Black
Black BLK-CPT235VH User manual
Black
Black BLK-CDS205NS2 User manual
Black
Black BLK-CWS108NH Manual
Black
Black BLK-CCP143VH User manual
Black
Black BLK-HD33IR User manual
Black
Black BLK-CCP141VH User manual
Black
Black BLK-HDPTZ12 User manual
Black
Black DIGIOP BLK-CWS208NH User manual
Black
Black BLK-CCD203VS2 User manual
Black
Black BLK-CCD203VS User manual
Black
Black BLK-CDS205NH User manual
Black
Black BLK-CCP141VH User manual
Black
Black BLK-CPV700RH User manual
Black
Black BLK-CDS105NH Manual
