Black Box Fiber Link-Transmitter User manual

CUSTOMER

SUPPORT

INFORMATION

Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX

FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: [email protected]

JANUARY 2001

AC455A-TX-R2

AC456A-RX-R2

Fiber Link—Transmitter

Fiber Link—Receiver

POWER

+12~16VDC

ALARM/+5VDC

GROUND

AC/DC+

GROUND/DC-

FIBER

VIDEO IN

FIBER LINK

FEDERAL COMMUNICATIONS COMMISSION

AND

INDUSTRY CANADA

RADIO FREQUENCY INTERFERENCE STATEMENTS

This equipment generates, uses, and can radiate radio frequency energy and if not

installed and used properly, that is, in strict accordance with the manufacturer’s

instructions, may cause interference to radio communication. It has been tested

and found to comply with the limits for a Class A computing device in accordance

with the specifications in Subpart J of Part 15 of FCC rules, which are designed to

provide reasonable protection against such interference when the equipment is

operated in a commercial environment. Operation of this equipment in a

residential area is likely to cause interference, in which case the user at his own

expense will be required to take whatever measures may be necessary to correct the

interference.

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

This digital apparatus does not exceed the Class A limits for radio noise emission from digital

apparatus set out in the Radio Interference Regulation of Industry Canada.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites

applicables aux appareils numériques de la classe A prescrites dans le Règlement sur le

brouillage radioélectrique publié par Industrie Canada.

The Fiber Link complies with CE EN55022 and EN50082-1 requirements.

FIBER LINK

NORMAS OFICIALES MEXICANAS (NOM)

ELECTRICAL SAFETY STATEMENT

INSTRUCCIONES DE SEGURIDAD

1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de

que el aparato eléctrico sea operado.

2. Las instrucciones de seguridad y operación deberán ser guardadas para

referencia futura.

3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de

operación deben ser respetadas.

4. Todas las instrucciones de operación y uso deben ser seguidas.

5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, cerca

de la tina de baño, lavabo, sótano mojado o cerca de una alberca, etc..

6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales que

sean recomendados por el fabricante.

7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea

recomendado por el fabricante.

8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá

a lo descrito en las instrucciones de operación. Todo otro servicio deberá ser

referido a personal de servicio calificado.

9. El aparato eléctrico debe ser situado de tal manera que su posición no

interfiera su uso. La colocación del aparato eléctrico sobre una cama, sofá,

alfombra o superficie similar puede bloquea la ventilación, no se debe colocar

en libreros o gabinetes que impidan el flujo de aire por los orificios de

ventilación.

10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor

como radiadores, registros de calor, estufas u otros aparatos (incluyendo

amplificadores) que producen calor.

11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del

tipo descrito en el instructivo de operación, o como se indique en el aparato.

FIBER LINK

12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización

del equipo no sea eliminada.

13. Los cables de la fuente de poder deben ser guiados de tal manera que no

sean pisados ni pellizcados por objetos colocados sobre o contra ellos,

poniendo particular atención a los contactos y receptáculos donde salen del

aparato.

14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las

recomendaciones del fabricante.

15. En caso de existir, una antena externa deberá ser localizada lejos de las lineas

de energia.

16. El cable de corriente deberá ser desconectado del cuando el equipo no sea

usado por un largo periodo de tiempo.

17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean

derramados sobre la cubierta u orificios de ventilación.

18. Servicio por personal calificado deberá ser provisto cuando:

A: El cable de poder o el contacto ha sido dañado; u

B: Objectos han caído o líquido ha sido derramado dentro del aparato; o

C: El aparato ha sido expuesto a la lluvia; o

D: El aparato parece no operar normalmente o muestra un cambio en su

desempeño; o

E: El aparato ha sido tirado o su cubierta ha sido dañada.

FIBER LINK

TRADEMARKS USED IN THIS MANUAL

Any trademarks mentioned in this manual are acknowledged to be the property of

the trademark owners.

FIBER LINK

Contents

1. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.2 Additional Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

3. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

3.1 Physical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

3.2 Signal Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3.3 Optical Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3.4 Power Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3.5 System Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

4. Transmitter and Receiver Optical Indicators. . . . . . . . . . . . . . . . . . 16

5. Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

5.1 Try This First . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

5.2 Calling Black Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

5.3 Shipping and Packaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

FIBER LINK

1. Specifications

Video Signal

Video Direction—TX→RX

Number of Video Channels—One

Standards Supported—Monochrome: EIA and CCIR; Color: NTSC, PAL,

SECAM

Video Input Signal—1.0 V p-p nominal composite video

Input Impedance—75 Ω

Video Output Signal—1.0 V p-p nominal composite video, unity gain, ±2%

Output Impedance—75 Ω

Signal-to-Noise Ratio—>54 dB at maximum optical attenuation

Video Bandwidth—10 Hz to 10 MHz

Video Resolution—800 TV lines

Differential Phase—<3°

Differential Gain—<3%

Tilt—0°

Input Coupling—Capacitative

Output Coupling—Sync tip clamped

Video Interconnection

Recommended Maximum Distance—Video Equipment to AC455A-TX-R2:

<100 ft. (30 m); AC456A-RX-R2 to Video Equipment: <100 ft. (30 m)

Recommended Cable Type—RG59 “U” cable (part number ETN59-BNC)

Video Termination—The last video component in the video line must be

terminated with 75 Ω.

FIBER LINK

Control Data Signal

Data Directions—Control: RX→TX; Response: TX→RX

Data Formats—All major up-the-coax formats, including American Dynamics,

Baxall, Burle, Elbex (sync and control), Panasonic®(PTZ and VD2), Pelco™,

Robot, Sensormatic, VCS format, Vicon™, Videoalarm™, and others.

Detection Area—In even fields, the control signal is imposed on lines 8 through

19. In odd fields, the control signal is imposed on lines 9 through 20.

Pulse Amplitude—50 mV to 2 V

Genlock Sync Signal

Sync Direction—RX→TX

Detection Area—Can be imposed on all lines outside the control area

Sync Amplitude—Up to 6 V

Optical

Wavelength—850 and/or 1300 nm

Optical Mode—Multimode

Optical Budget—13 dB minimum

Operating Distance at 850 nm—Operating distance is approximate, and will be

affected by the type and number of splices in the fiber and by the exact type of

fiber used. Maximum: 10,000 ft. (3048 m)

Emitter Type—LED

Fiber Size—62.5 µ

Modulation Type—Frequency modulation

Gain Control—Fully automatic (AGC)

Transmitter Launch Power—> -17 dBm (1300 nm)

Transmitter Sensitivity—< -27 dBm (850 nm)

Receiver Sensitivity—< -26 dBm (1300 nm)

FIBER LINK

Receiver Launch Power—> -14 dBm (850 nm)

Agency Compliance

Emissions—FCC Part 15; ICES-003 (Canada); AS/NZS 3548 (Australia/NZ); CE

EN55022; CE EN50082-1, including EN61000-4-2 ESD, EN61000-4-3 Radiated

Immunity, EN61000-4-4 Electrical Fast, Transient Burst (EFT) Immunity,

EN61000-4-5 Power Surge Immunity, EN61000-4-6 Conducted Disturbances

Immunity, EN61000-4-11 Voltage Dips, Short Interruptions and Voltage

Variations

Immunity—ENV50204 Radiated, Pulsed Magnetic Field Immunity

Product Safety—No standards required, since the Fiber Link is DC-powered by

SELV (Safety Extra-Low Voltage)

Controls

Alarm Disable—Removable jumper on receiver cards

LEDs

Video In (bicolor)—Shows presence of good video signal

Level/Loss (bicolor)—Shows presence of good optical signal

COMMAND—Shows activity on PTZ control channel

RESPONSE—Shows activity on response channel

SYNC—Shows activity on genlock channel

Connectors

Signal Input—Optical: ST®; Video: BNC

Signal Output—Optical: ST; Video: BNC

Power Input—Standalone units: 3-pin detachable screw terminal connector;

Rack units: Direct rack connection

FIBER LINK

Electrical

Input Voltage—AC455A-TX-R2: 12 to 16 VAC, 12 to 14 VDC; AC456A-RX-R2:

13.5 to 16 VDC

Input Power Frequency—50 to 60 Hz

Current Requirement—AC455A-TX-R2: 300 mA; AC456A-RX-R2: 380 mA

Power Consumption—6 W

Heat Equivalent—0.3 BTU/min., 0.09 cal/min.

NOTE

The heat equivalent represents the conversion of all input power to heat.

The actual heat generated will be less.

Environmental

Temperature—Operating: 32 to 122°F (0 to 50°C); Storage: -40 to +185°F (-40 to

+85°C)

Mechanical

Enclosure—Transmitter: 4 x 4 (10 x 10 cm); Receiver: 501R

Construction—Aluminum enclosure with black semigloss paint finish

Mounting Method—(4) No. 6 (3-mm) screws

Size—AC455A-TX-R2: 1.2"H x 4.6"W x 4.7"D (3 x 11.7 x 11.9 cm), including

connectors; AC456A-RX-R2: 1.2"H x 6.3"W x 9.8"D (3.2 x 16.2 x 24.9 cm),

including connectors

Weight—AC455A-TX-R2: 0.7 lb. (0.3 kg); AC456A-RX-R2: 1.6 lb. (0.7 kg)

This manual suits for next models

Table of contents

Other Black Box Receiver manuals

Black Box

Black Box MediaCento AVX-DVI-IP-TA User manual

Black Box

Black Box MediaCento UVX-HDMI-POE-RX User manual

Black Box

Black Box VX-1003-RX User manual

Black Box

Black Box AVX-VGA-TP-TX User manual

Black Box

Black Box IC454A User manual

Black Box

Black Box ServSwitch Agility ACR1000A User manual

Black Box

Black Box EMERALD EMD5004-R User manual

Black Box

Black Box AC155A-R3 User manual

Black Box

Black Box AC1063A-R2 User manual

Black Box

Black Box FiberPath AC444A User manual

Black Box

Black Box MediaCento VSPX-HDMI1X4-TX User manual

Black Box

Black Box ME806A User manual

Black Box

Black Box AC3003A-NEC User manual

Black Box

Black Box AC1140A User manual

Black Box

Black Box InvisaPC User manual

Black Box

Black Box MEDIACENTO IPX 4K User manual

Black Box

Black Box MediaCento VX-HDMI-4K-TX User manual

Black Box

Black Box ME190A User manual

Black Box

Black Box AC155A User manual

Black Box

Black Box IC441A-R2 User manual

Black Box

Black Box ACS4001A-R2-R User manual

Black Box

Black Box FaxReceiver MC200A User manual

Black Box

Black Box AC155A-R2 User manual

Black Box

Black Box FaxReceiver MC200A User manual

Popular Receiver manuals by other brands

Garmin

Garmin GA 23 Owner's manual and reference guide

Aiphone

Aiphone PS-12F instructions

IMES

IMES TCS-01CA-PMI Original Operating Instruction

BWI Eagle

BWI Eagle AIR-EAGLE SR Product information bulletin

AMIMON

AMIMON AMN12310 WHDI datasheet

Dual

Dual DMCPA79BT Installation & owner's manual

Sound Associates

Sound Associates SA652P Operation manual

Sherwood

Sherwood NewCastle R-772 Service manual

Audio

Audio A10-RX Series user guide

AllSee

AllSee PushShare PSRV1.1 user manual

DEMAG

DEMAG DRC-DR D2 operating instructions

Teleco

Teleco TVRCL868A02 manual

Bosch

Bosch RF3222E installation instructions

Kramer

Kramer 631R user manual

Xpress

Xpress xmc10 installation guide

JVC

JVC KD-MR1BTS instruction manual

Omega Engineering

Omega Engineering UWTC-REC3 user guide

e-survey

e-survey E300 Pro user manual