BIXOLON SRP-350III User manual
User Manual
Network Interface
SRP-350Ill
SRP-352Ill
SRP-350IIOBE
Thermal Printer
Network Interface
Rev.1.00
- 2 -
■Table of Contents
1. Manual Information........................................................................................................3
2. Specifications.................................................................................................................3
2-1 Hardware version ..................................................................................................... 3
2-2 Configuration Tool .................................................................................................... 3
3. How to install..................................................................................................................4
4. Ethernet Test by using Windows Test Page ................................................................5
5. Factory Reset...............................................................................................................11
6. Function Key set up.....................................................................................................12
7. Troubleshooting...........................................................................................................13
[Appendix 1] Details of interface card............................................................................14
[Appendix 2] Virtual Driver..............................................................................................14
Network Interface
Rev.1.00
- 3 -
1. Manual Information
The purpose of this manual is to provide information on the operation and usage
instructions of the Ethernet Interface for the BIXOLON Printers.
We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions and
quality of all our products. In following, product specifications and/or user manual content
may be changed without prior notice.
2. Specifications
2-1 Hardware version
Printer
Interface Card
Picture
SRP-350III
SRP-352III
IFJ-E TYPE
SRP-350IIOBE
OnBoard
2-2 Configuration Tool
BIXOLON provides 2 types of network and serial communication set up utilities as a below.
- Configure_Vx.x.x.exe
- Web Server
Network Interface
Rev.1.00
- 4 -
3. How to install
1) Check the interface version.
[Note]
Each version uses its own Configuration Tool.
2) Turn of the printer and insert the interface card.
Interface Card
Printer
IFJ-E TYPE
SRP-350III
SRP-352III
OnBoard
SRP-350IIOBE
Network Interface
Rev.1.00
- 5 -
4. Ethernet Test by using Windows Test Page
You can use the Windows printer driver as shown below when there is no test program.
Operating systems that allow you to use the Windows printer driver are Windows 2000, XP,
2003 Server, VISTA, 2008 Server, 7.
1) Install the Windows printer driver.
[Note]
- The Windows driver is included in the CD.
2) Click the Start button, and then select “Printers and Faxes.”
3) Select and right click on the corresponding model, and then select “Properties.”
Network Interface
Rev.1.00
- 6 -
4) Select the “Ports” tab from the “Properties” window.
5) Click “Add Port…”
Network Interface
Rev.1.00
- 7 -
6) Select “Standard TCP/IP Port” and click “New Port...”
7) Click the [Next] button in the “Add Standard TCP/IP Printer Port Wizard” window.
8) Enter the IP address assigned to the printer in the “Printer Name or IP Address” field in
the “Add Port” pop up window, and then click the [Next] button.
[Note]
- Enter the same IP address entered during the installation of the interface card.
Only enter the “Printer name or IP address.”
Network Interface
Rev.1.00
- 8 -
9) Click the [Next] button in the “Additional Port Information Required” window.
[Note]
- Click the [Next] button to proceed without any changes.
10) Click the [Finish] button at the “Completing the Add Standard TCP/IP Printer Port
Wizard” window.
11) Click the “Cancel” button in the Printer Port window, closing the window.
Network Interface
Rev.1.00
- 9 -
12) Click the “Configure Port...” button in the “Properties” window.
13) Enter the same number as the local port number set during the installation of the
interface card in the “Port Number” field in the Raw Settings.
[Note]
- Do not change any other items except the RAW Settings.
Network Interface
Rev.1.00
- 10 -
14) Click [OK] when you finish entering the required values, and then click the [Apply]
button.
15) Select the “General” tab in the Properties window, and then select the “Print Test
Page” to check the printing status.
Other manuals for SRP-350III
4
This manual suits for next models
2
Table of contents
Other BIXOLON Printer manuals
BIXOLON
BIXOLON SPP-R200 User manual
BIXOLON
BIXOLON RP-F310 User manual
BIXOLON
BIXOLON SPP-R200III User manual
BIXOLON
BIXOLON SPP-R200II Installation instructions
BIXOLON
BIXOLON XM7-20 Instruction manual
BIXOLON
BIXOLON SRP-350II User manual
BIXOLON
BIXOLON SRP-350III User manual
BIXOLON
BIXOLON SRP-350PG - SRP 350 B/W Direct Thermal... User manual
BIXOLON
BIXOLON SRP-350 PlusA User manual
BIXOLON
BIXOLON SRP-380 User manual
BIXOLON
BIXOLON SRP-350 PlusA User manual
BIXOLON
BIXOLON TX Series Instruction manual
BIXOLON
BIXOLON XT5-40NR Series User manual
BIXOLON
BIXOLON SRP-350 PlusA User manual
BIXOLON
BIXOLON BGT-100P User manual
BIXOLON
BIXOLON SRP-350 PlusA User manual
BIXOLON
BIXOLON SPP-L3000 User manual
BIXOLON
BIXOLON SPP-R410 User manual
BIXOLON
BIXOLON SRP-F310II User manual
BIXOLON
BIXOLON SRP-350 PlusA User manual
