Biostar P4TDK Operating and installation instructions

FCC Statement and Copyright

This equipment has been tested and found to comply with the limits of a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. There is no guarantee that interference will not occur in a

particular installation.

The vendor makes no representations or warranties with respect to the

contents here of and specially disclaims any implied warranties of

merchantability or fitness for any purpose. Further the vendor reserves the

right to revise this publication and to make changes to the contents here of

without obligation to notify any party beforehand.

Duplication of this publication, in part or in whole is not allowed without

first obtaining the vendor’s approval in writing.

The content of this user’s is subject to be changed without notice and we

will not be responsible for any mistakes found in this user’s manual. All the

brand and product names are trademarks of their respective companies.

ENGLISH.................................................................................................1

P4TDK Features..................................................................................................... 1

Package contents.................................................................................................. 1

Layout of P4TDK ................................................................................................... 2

CPU Installation..................................................................................................... 3

DDR DIMM Modules: DDR1-4 ............................................................................... 4

Jumpers, Headers, Connectors & Slots.............................................................. 5

SPANISH.................................................................................................9

Características del P4TDK.................................................................................... 9

Contenido del Paquete ......................................................................................... 9

Disposición del P4TDK....................................................................................... 10

Instalación de la CPU...........................................................................................11

Módulos DDR DIMM: DDR1-4............................................................................. 12

Puentes, Cabezales, Conectores y Ranuras..................................................... 13

TROUBLE SHOOTING..........................................................................17

SOLUCIÓN DE PROBLEMAS...............................................................18

iip

iio

English

P4TDK Features

 Use Intel 82845E/ 82801DB Chipset, Winbond W83627HF, LAN Chip

(optional), 1394 Chip (optional).

 Contains on board I/O facilities, which include two serial port, a parallel port,

a PS/2 mouse port, a PS/2 keyboard port, audio ports, USB ports, a LAN

port (optional) and a game port.

 Supports the Intel Pentium 4®(Socket 478) processor up to 2.4 GHz.

 Supports Ultra 100/66/33, BMIDE and PIO modes.

 Supports USB2.0 High Speed Device.

 Supports up to 2 GB for 4 single-sided or 2 Double sided DDR 200/266

MHz (with ECC) devices, running at 400/533 MHz Front Side Bus

frequency.

 Supports AGP 2.0 interface, 2X/4X Fast write protocol. (1.5V Only)

 Complies with PC ATX form factor specifications.

 Supports popular operating systems such as Windows NT, Windows 2000,

Windows ME, Windows XP, LINUX and SCO UNIX.

Package contents

 HDD Cable X 1, FDD Cable X 1, Fully Setup Driver CD X 1

 Flash Memory Writer for BIOS update X 1

 USB Cable X 2 (Optional)

 Rear I/O Panel for ATX Case X 1 (Optional)

iip

iio

Layout of P4TDK

JKBMS1

JPRNT1

JGAME_USB1

K/B

Mouse

JRJ45USB1

USB & LAN

GAME Port

DDR1

DDR2

JAUDIO1

LAN

CHIP

JCDIN1

SP-OUTMIC-IN LINE-IN

JCOM1

JCOM2

COM1

JCDIN2

JSFAN1

JCFAN1

Parallel Port

INTEL

82845E

INTEL

82801DB

(ICH4)

FWH

BIOS

COM1COM1COM2

Socket 478

DDR1

DDR2

DDR1

DDR2

DDR3

DDR4

Winbond

I/O

AGP1

PCI1

PCI2

PCI3

PCI4

PCI5

PCI6

CNR1 WOL1 JUSB2 JUSB3 JPANEL1

JSD1

JMS1

JSC1

JCMOS1 FDD1

IDE1

IDE2

BAT1

JDIMMVOLT

JATXPWR1

JAUXPWR1

JATXPWR2

USBUSB

1394

CHIP

JTAD1

iip

iio

CPU Installation

1. Pull the lever sideways away from the socket then raise the lever up

to 90-degree angle.

2. Locate Pin A in the socket and lock for the white dot or cut edge in

the CPU. Match Pin A with the white dot/cut edge then insert the

CPU.

3. Press the lever down. Then Put the fan on the CPU and buckle it

and put the fan’s power port into the JCFAN1, then to complete the

installation.

CPU/ System Fan Headers: JCFAN1/ JSFAN1

CPU

JCFAN1

Ground

12V

Sense

JSFAN1

Ground

12V

Sense

iip

iio

DDR DIMM Modules: DDR1-4

DRAM Access Time: 2.5V Unbuffered DDR 200/266 MHz Type

required.

DRAM Type: 128MB/ 256MB/ 512MB DIMM Module (184 pin)

Due to the limitation of chipset, this board only can support up to 2 banks

of DDR memory.

However, in the market, there are so many single-sided modules

occuping half bank. BIOSTAR would like to utilize the modules as many

as possible. So we divide each bank into 2 sockets. That means any

bank just can support one double-sided or two single-sided modules

only.

DDR1 & 2 => Bank 0, DDR3 & 4 => Bank 1.

Each Bank 0 and 1, contain 2 DDR sockets, one white & one blue.

※If you have one DDR module and you are not sure if it is a

single or double- sided DDR module, please insert in DDR1

(blue color) socket first.

※If you have two DDR modules and you are not sure if they are

single or double-sided DDR modules, please insert in DDR1

and 3 (blue color) Sockets.

※DDR 2 and 4, white color sockets, only support single-sided

DDR module.





For better compatibility, before insert DDR modules into the

sockets, we strongly suggest to use the same type of modules

including the model, speed and size of memory.

Bank 0

Bank 1

DDR1

DDR2

DDR3

DDR4

iip

iio

Jumpers, Headers, Connectors & Slots

Hard Disk Connectors: IDE1/ IDE2

The motherboard has a 32-bit Enhanced PCI IDE Controller that

provides PIO Mode 0~4, Bus Master, and Ultra DMA / 33/ 66/ 100

functionality. It has two HDD connectors IDE1 (primary) and IDE2

(secondary).

The IDE connectors can connect a master and a slave drive, so you can

connect up to four hard disk drives. The first hard drive should always be

connected to IDE1.

Floppy Disk Connector: FDD1

The motherboard provides a standard floppy disk connector that

supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. This

connector supports the provided floppy drive ribbon cables.

Accelerated Graphics Port Slot: AGP1

Your monitor will attach directly to that video card. This motherboard

supports video cards for PCI slots, but it is also equipped with an

Accelerated Graphics Port (AGP). An AGP card will take advantage of

AGP technology for improved video efficiency and performance,

especially with 3D graphics.

Communication Network Riser Slot: CNR1

The CNR specification is an open Industry Standard Architecture, and it

defines a hardware scalable riser card interface, which supports audio,

network and modem only.

Peripheral Component Interconnect Slots: PCI1-6

This motherboard is equipped with 6 standard PCI slots. PCI stands for

Peripheral Component Interconnect, and it is a bus standard for

expansion cards, which has, supplanted the older ISA bus standard in

most ports. This PCI slot is designated as 32 bits.

iip

iio

Power Connectors: JATXPWR1/ JATXPWR2/

JAUXPWR1

DIMM Power Selection Connector:

JDIMMVOLT(Optional)

* You can setup the DIMM Power in the BIOS Setup or JDIMMVOLT (one of

them) for over voltage function.

Wake On LAN Header: WOL1

Front USB Header: JUSB2/ JUSB3(Optional)

JATXPWR1

(ATX Main Power Conn.)

JATXPWR2

(ATX 12V Power Conn.)

JAUXPWR1

(AUX Power Conn.)

JUSB2/3

Pin1,2 ==> +5V

Pin3,4 ==> Data(-)

Pin5,6 ==> Data(+)

Pin7,8 ==> Ground

Pin9 ==> KEY

Pin10 ==> NA

WOL1

5V_SB Wakeup

Ground

JDIMMVOLT

Pin 1-2 off ==> 2.6V

Pin 3-4 off ==> 2.7V

Pin 5-6 off ==> 2.8V

Pin 7-8 off ==> 2.9V

(Default ==> 2.5V)

JDIMMVOLT

Pin 1-2 on ==> 2.6V

Pin 3-4 on ==> 2.7V

Pin 5-6 on ==> 2.8V

Pin 7-8 on ==> 2.9V

(Default ==> 2.5V)

iip

iio

Front Panel Connector: JPANEL1

Memory Stick Header: JMS1 (optional)

SD Memory Card Header: JSD1 (optional)

JMS1

Pin1 ==> Ground , Pin2 ==> MS1

Pin3 ==> 3.3V , Pin4 ==> MS2

Pin5 ==> MS3 , Pin6 ==> MS4

Pin7 ==> MS5 , Pin8 ==> MSCLK

Pin9 ==> MSPWCTL#

Pin10 ==> MSLED

SPK

PWR_LED

HLED

SLP

RST

ON/OFF

SPK ==> Speaker Conn.

HLED ==> Hard Driver LED

RST ==> Reset Button

IR ==> Infrared Conn.

SLP ==> Sleep Button

PWR_LED ==> Power LED

ON/ OFF ==> Power-on Button

JSD1

Pin1 ==> Ground , Pin2 ==> SD1

Pin3 ==> 3.3V , Pin4 ==> SD2

Pin5 ==> SD3 , Pin6 ==> SD4

Pin7 ==> S 5 , Pin8 ==> SDCLK

Pin9 ==> SDPWCTL#

Pin10 ==> SDLED

iip

iio

Smart Card Header: JSC1 (optional)

Audio Subsystem: JAUDIO1/ JTAD1(Optional)/

JCDIN1/ JCDIN2(Optional)

Back Panel Connectors

JSC1

Pin1 ==> 5V , Pin2 ==> Ground

Pin3 ==> SCAPWRCTL#

Pin4 ==> SCAR5#

Pin5 ==> SCAC4 , Pin6 ==> SCALED

Pin7 ==> SCAIO , Pin8 ==> SCAC8

Pin9 ==> SCACLK

Pin10 ==> SCAPSNT

JAUDIO1

(Front Audio Header) JTAD1 => optional

(Telephony Audio Header)

JCDIN2 => optional

(CD-ROM Audio-In Header) JCDIN1

(CD-ROM Audio-In Header)

PS/2

Keyboard

PS/2

Mouse

COM1

Parallel

Game Port/

USB Ports (optional)

JPRNT1

JGAME1_USB1

JCOM1

JKBMS1

USB

LAN(Optional)

RJ45USB1

COM1 Speaker

Out Line In

Mic

JVGA1

VGA1

Other manuals for P4TDK

Table of contents

Languages:

Other Biostar Motherboard manuals

Biostar

Biostar I915G-M7 User guide

Biostar

Biostar B560GTQ User manual

Biostar

Biostar Z270GT9 User manual

Biostar

Biostar G41D3C User guide

Biostar

Biostar M7VKF User manual

Biostar

Biostar M6VCG User manual

Biostar

Biostar M7NCD Pro User guide

Biostar

Biostar M6VCF User manual

Biostar

Biostar N68S3PLUS - BIOS User guide

Biostar

Biostar TA785G3 HD - BIOS User guide

Biostar

Biostar 945GC-M7 TE User guide

Biostar

Biostar M6TBC User manual

Biostar

Biostar K8NHA-M Grand User manual

Biostar

Biostar U8868 User guide

Biostar

Biostar 6100 AM2 User guide

Biostar

Biostar Hi-Fi K1-I User guide

Biostar

Biostar P4VMA-M User guide

Biostar

Biostar A690E-IS User guide

Biostar

Biostar A10N-9830E User manual

Biostar

Biostar TA785G3 HD - BIOS User guide

Biostar

Biostar U8668-D User manual

Biostar

Biostar Racing X370GT7 User manual

Biostar

Biostar TPower I45 User guide

Biostar

Biostar J3710NH User guide

Popular Motherboard manuals by other brands

DFI

DFI SD170 user manual

ASROCK

ASROCK ROMED8-2T user manual

Asus

Asus P2L97A user manual

Winmate

Winmate IC70 user manual

Asus

Asus MES-B user manual

Grantech

Grantech SYS8F377VGGA-3OMN user manual

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR user guide

Gigabyte

Gigabyte GA-9IVDT user manual

Texas Instruments

Texas Instruments ADS8372EVM user guide

Commell

Commell MS-C73 user manual

IBT Technologies

IBT Technologies MB860 user manual

Nvidia

Nvidia TEGRA DG-04927-001_V01 user guide

Intel

Intel D33217CK specification

Asus

Asus F1A55-M LX PLUS R2.0 user manual

EPC

EPC EPC9147C quick start guide

Asus

Asus EX-B760M-V5 D4 quick start guide

EPOX

EPOX MU-8KHA0010 user manual

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 user guide