Billion Bipac 74 Series User manual

Instructions on how to capture logs from Bipac 74xx.

1. Please turn off your Bipac 74xx.

2. Unplug the USB dongle from your router.

3. Plug the serial (RS232) 9 pins connecter to Ethernet converter to the computer’s

RS232 serial port.

4. Connect up an Ethernet cable (RJ45) from the RS232 to Ethernet converter to the

74xx LAN port 4, then insert a second RJ45 cable into the computer’s LAN port and

the other end of the RJ45 cable to LAN port 1 on the 74xx.

Go to your computer then start Hyper Terminal program in windows.

Enter test and pick any icon and click on “OK”. The next page will load and look like

this.

Please select “COM1” and click on “OK”

On the Bits per second please select “9600” as shown above. Also please select

“None” on the Flow control and click on “OK”.

You should now have this page.

Please now turn on your device without the usb connected.

You should see the following messages.

Please wait for a while as the unit fully boots up. Once it has failed to detect the USB

dongle you will see this page.

If you are prompted to enter the username and password before the detection of the

USB dongle please enter the default username “admin” and the password “admin”.

If not then the page will look the same as above.

Enter your username as “admin” and the password “admin”

Once you are logged in your will get the message “Login Successful”, as shown

below.

The cursor should be flashing next to admin as shown above.

Then type “system trace enable usb_host debug” then press enter

Then type “console enable” then press enter

Then type “event show” then press enter

After typing those commands your page should look like this.

Now please plug in your USB dongle into your device.

The following logs will start to appear.

Please wait around 3 minutes.

Once three minutes are passed, please click on file, save as, and save the file to a

location.

Please run this test three times and capture all three logs for us and send them back to

us.

Thanks once again for helping capture these results.

Other Billion Network Router manuals

Billion

Billion BiPAC 7404V series User manual

Billion

Billion BiPAC 5200N User manual

Billion

Billion BiPAC 7202 User manual

Billion

Billion BiPAC 5200 User manual

Billion

Billion BiPAC 7401VP User manual

Billion

Billion BiPAC 7404VGOX User manual

Billion

Billion BiPAC 9800 User manual

Billion

Billion BiPAC 7560G User manual

Billion

Billion BiPAC 7401VP User manual

Billion

Billion BIPAC-645 User manual

Billion

Billion BiPAC 5210S User manual

Billion

Billion BiPAC 7202 User manual

Billion

Billion BiPAC 7404VGP User manual

Billion

Billion BiPAC 7301VGP User manual

Billion

Billion myGuard 7500GL User manual

Billion

Billion BiPAC 7100 User manual

Billion

Billion BIPAC 7500 User manual

Billion

Billion BiPAC 7404VOX User manual

Billion

Billion BiPAC 4700ZU User manual

Billion

Billion BiPAC 7402VGO User manual

Billion

Billion BiPAC 7560G User manual

Billion

Billion 800VGT User manual

Billion

Billion myGuard 7500GL User manual

Billion

Billion BiPAC 5200 User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview

LevelOne

LevelOne FBR-1416 user manual