Billion BiPAC 4700ZU User manual

BiPAC 4700ZU(L)

4G LTE Outdoor (VPN) Router

* Only BiPAC 4700ZU support VPN feature

Quick Start Guide

BiPAC 4700ZU(L) 4G/LTE Outdoor (VPN) Router

Package Contents



BiPAC 4700ZU(L)

4G/LTE Outdoor (VPN)

Router



M25 Cable Gland



This Quick Installation

Guide



Outdoor LAN Cable



Gigabit Power-over-

Ethernet (PoE) Injector



Grounding Wire



Mounting Kit

PLEASE READ THE QUICK START GUIDE AND FOLLOW THE STEPS

CAREFULLY. THIS QUICK START GUIDE WILL HELP YOU INSTALL THE

DEVICE PROPERLY AND AVOID IMPROPER USAGE. IF YOU NEED MORE

INFORMATION ON THIS SOFTWARE CONFIGURATION, PLEASE REFER TO

THE ON-LINE USER MANUAL.



Please follow Router Installation Instructions to power on your ODU,

Never disassemble or modify this product, tampering with this product

may result in WARRANTY VOID.



This equipment should be installed and operated with minimum distance

20cm away from your body.

Quick Start Guide

Hardware Overview

LED Description:

CONNECTORS

DESCRIPTION

SIM / LED / Reset

Insert the SIM card into the SIM slot.

Press the reset button to reset device or restore to factory default settings.

Gigabit LAN(PoE)

Connect with the supplied PoE injector, 802.3at compliant, using an Ethernet

cable.

LED STATUS DESCRIPTION

Orange System is either in initial startup phase or has boot failure

Green System is up and ready

1 Power

Off No input power

Green Transmission speed is at Gigabit speed (1000Mbps)

Orange Transmission speed is at 10/100Mbps

Blinking Data being transmitted/received

2 LAN(PoE)

Off No device is being connected

Green IP connected and traffic is passing thru the device

3 Internet

Orange IP request failed or System is in initial booting phase

Green RSSI greater than -69 dBm. Excellent signal condition

Green

Flashing quickly

RSSI from -81 to -69 dBm. Good signal condition

Orange

Flashing quickly

RSSI from -99 to -81 dBm. Fair signal condition.

Orange

Flashing slowly RSSI less than -99 dBm. Poor signal condition.

Orange No signal. 4G_LTE module is still in connected mode

3G/4G-LTE

(Received

Signal

Strength

Indicator)

Off No LTE module or LTE module fails

BiPAC 4700ZU(L) 4G/LTE Outdoor (VPN) Router

Mounting Kit Installation

1. Attach the Articulation Pole to the Enclosure

Attach the articulation pole to the back of the BiPAC 4700ZU(L) enclosure using the supplied

M6 screws, M6 spring washers and M6x16 screws which are included in the mounting kit.

Step 1:

Step 2:

Step 3: Use Wrench to tighten or loosen the bolt(s).

Quick Start Guide

2. Wall or Pole Mounting

2.1 Mounting on Wall

Fix the T-formed Bracket to the wall by using wood screws and Gyprock plugs.

2.2 Mounting on a Pole

2.2.1 Mounting for pole 1.5” (38mm) to 3”(80mm)

Attach the T-formed Bracket and the W-bar to the pole then use M6x60 bolts, M6 spring

washers and M6 washers to fix the mounting kit onto the pole.

2.2.2 Mounting for pole 3” (80mm) or above

BiPAC 4700ZU(L) 4G/LTE Outdoor (VPN) Router

3. Install the Articulation Pole with the T-formed Bracket

Attach the articulation pole (BiPAC 4700ZU(L) enclosure) to the T-formed bracket using the

supplied M8 nut, M8 spring washer, M8 washer and M8x40 screw bolts.

4. Position Adjustment

Find the location and best angle for getting the strongest signal from the base station. The

BiPAC 4700ZU(L) must be directed towards the nearest base station.

Adjusting the router position to get a better reception and/or fine-tuning the router orientation

(45-degree angle position or in horizontal/vertical position) to have the best signal strength.

Quick Start Guide

Router Installation Instructions

1. Grounding the BiPAC 4700ZU(L) to Complete the Installation

Attach the grounding wire to the BiPAC 4700ZU(L) and tighten the screw

2. Power on your BiPAC 4700ZU(L)

Step 1: Assemble M25 cable gland. Unscrew the LAN (PoE) port and insert the supplied

outdoor Ethernet cable (RJ-45) through material A-D, and then connect the RJ-45 Ethernet

cable into the LAN (PoE) port.

Step 2:

3.1: Insert

○

C at the back end of

○

3.2: clip

○

B on

○

3.3: keep

○

B close to

○

3.4: then tighten

○

A .

BiPAC 4700ZU(L) 4G/LTE Outdoor (VPN) Router

It is recommended to use an Industrial-grade SIM card.

MUST use a Mini-SIM (2FF) Card with dimensions of 25x15x0.76mm.

Step 3: Insert the other end of outdoor Ethernet cable (RJ-45) to the supplied Gigabit PoE

injector Data+Power port. Connect another Ethernet cable (RJ-45) directly to the Data port

and the other end of cable to a switch or broadband router.

IMPORTANT: It is recommended to put the Gigabit PoE Injector on an UPS or Surge

Protector. Use the supplied grounding wire to ground your BiPAC 4700ZU(L) ODU is

REQUIRED!

3. Set up your 4G/LTE Internet Connection

Step 1: Unscrew the cap of SIM card slot.

Step 2: Slide the SIM card with the mental

contacts (gold plate) facing down to the SIM

slot then push it all the way in until you hear

the clicking sound.

Quick Start Guide

Step 3: Screw the cap back tightly.

NOTE: Please power off the device before

inserting or removing the SIM card.

Step 4: Login to your BiPAC 4700ZU(L)

The default IP of modem is 192.168.1.254 with subnet 255.255.255.0. Make sure the

attached PC to this router is in the same subnet and has an IP address in the range between

192.168.1.1 ~ 192.168.1.253.

Open a web browser and type http://192.168.1.254 in the URL address bar.

The login prompt will appear. Input the default username (admin) and password (admin) for

Account type, Administrator.

<*This username / password may vary by different Internet Service

Providers.>

Please see the relevant sections of user manual for detailed instructions on how to

configure your BiPAC 4700ZU(L).

Step 5: Use the Quick Start wizard for fast Internet connection setups.

4.1 Change administration password: Setup a new password for “admin” account for device

management. The default password is “admin”. Click Continue to go on to the next step.

*The password may vary by different Internet Service Providers.

4.2 Time Zone Configuration: Enable and select your Time Zone then click Continue to go on

to the next step

URL Address bar:

type

http://192.168.1.254

New Password:

assign a new,

unique password

Confirm Password: re-

enter the

new password again

Next Step: click Next

Time Zone:

select your time zone

Next Step: click Next

This manual suits for next models

Table of contents

Other Billion Network Router manuals

Billion

Billion BiPAC 5200G Series User manual

Billion

Billion BiPAC 7401V(G)P R4 User manual

Billion

Billion BiPAC 7404V series User manual

Billion

Billion BiPAC 7404V series User manual

Billion

Billion BiPAC 7300N User manual

Billion

Billion BIPAC-5100W User manual

Billion

Billion Modem/Router ADSL BIPAC-7100S User manual

Billion

Billion BiPAC 6300NXL User manual

Billion

Billion BiPAC 7402R2 User manual

Billion

Billion BiPAC 5200G Series User manual

Billion

Billion MWEB W40 User manual

Billion

Billion BiPAC 5100S User manual

Billion

Billion BiPAC 5210G RC User manual

Billion

Billion BiPAC 7800 User manual

Billion

Billion BiPAC 6404VP User manual

Billion

Billion BiPAC 7800 User manual

Billion

Billion BiPAC 8200N User manual

Billion

Billion BiPAC 5200 User manual

Billion

Billion BIPAC- 8500 User manual

Billion

Billion BiPAC 7301VGP User manual

Billion

Billion BiPAC 711C2 User manual

Billion

Billion BiPAC 7404VNOX User manual

Billion

Billion BiPAC 5200G Series User manual

Billion

Billion BiPAC 7404VNOX User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview

LevelOne

LevelOne FBR-1416 user manual