Billion BiPAC 7402X Series User manual
BiPAC 7402X(L),
7402GX(L), 7402NX,
7402VNOX
ADSL2/2+ Modem/Routers with 3G back-up
QoS VPN Firewall Wired/Wireless
Multi-Port Switching Hub
UK Quick Install Guide
LThis guide covers only the initial
Internet set-up. Please refer to
the full User Manual on the CD-
ROM for more advanced
settings. This guide is based on
the Billion BiPAC 7402GX
3G/ADSL2+ VPN Firewall
Modem/Router. Screen shots in
this guide may vary slightly from
the actual router.
www.billion.uk.com
2
This symbol on the product or in the instructions means that your electrical and electronic
equipment should be disposed at the end of its life separately from your household waste.
There are separate collection systems for recycling in the EU.
For more information, please contact the local authority or your retailer where you purchased
the product.
3
QUICK INSTALL GUIDE
Billion 7402X/GX 3G/ADSL2+ VPN Firewall Modem/Router Set Up
The Billion 7402X/GX 3G/ADSL2/2+ VPN Firewall Modem/Router has a Dual
WAN interface for use with fixed line ADSL services or mobile 3G services.
You can set up the router with:
1. ADSL as the primary WAN interface with 3G as a back-up (Autofailover
mode) or,
2. You can set 3G as the primary WAN interface to create a portable
hotspot, for instance at an exhibition, road show, field trip etc.
This installation guide will take you through the process of initial configuration of
your ADSL settings with 3G as a back-up (see sections 2.1 and 2.3). Once you have
configured your ADSL and 3G settings you can then change the primary WAN
interface to 3G for use as a stand alone 3G router or portable hotspot mode (see
section 2.4).
1.1 Starting out:
Before you can establish an Internet connection through your Billion 7402X/GX
Modem/Router make sure you have the following:
1. A Computer or Notebook with an installed Network Adaptor (sometimes called
an Ethernet Adaptor, Network Card or NIC)
2. An ADSL or DSL service account and configuration information provided by
your Internet Service Provider (ISP). You should need only a User Name and
Password, but you can check with your ISP to see if you require any of the
other following configuration parameters to connect your Billion 7402X/GX
Modem/Router to the Internet :
a. ISP User Name and Password
b. VPI/VCI parameters
c. Multiplexing Method
d. Host and Domain Names
e. ISP Domain Name Server ( DNS ) Address
f. Fixed or Static IPAddress.
3. A compatible 3G USB dongle or USB stick for 3G connectivity with SIM card
(see www.billion.uk.com/compatible-3G.htm for a full list of compatible cards)
from your mobile service provider.
4. Username and Password and APN from your mobile service provider.
4
1.2 Steps for Connection:
The following are the steps to properly connect your Billion 7402X/GX
Modem/Router:
1. Turn off your computer.
2. If you do not have an ADSL faceplate installed by your service provider, you
must ensure ADSL splitters (also called microfilters or filters) are fitted to all
telephone sockets in use.
3. Connect the supplied ADSL (RJ-11) cable from the splitter/filter of your chosen
telephone socket (or ADSL faceplate if you have one) to the DSL Port of your
Billion 7402X/GX Modem/Router.
4. Connect the yellow Ethernet cable (RJ-45) from one of the Ethernet ports of your
Billion 7402X/GX Modem/Router to the Network Adaptor in your computer.
5. Connect the Power adaptor to the Billion 7402X/GX Modem/Router and plug the
other end into a Power outlet. Power up the unit.
6. Turn on your computer. Please allow up to 45 seconds for your Network Adaptor
to locate the Router. Please wait for the DSL light on the front of the router to turn
to solid – this may take up to 1-2 mins (see 3.1 Troubleshooting the ADSL
connection).
7. You are now ready to configure your ADSL and Wireless connection for the
Billion 7402X/GX Modem/Router. All you need to do is to follow the instructions
that follow and enter your User Name and Password as supplied by your Service
Provider. No other changes should be necessary.
5
2.1 ADSL and Wireless Configuration:
1. Open Internet Explorer or your default web browser and type in
http://192.168.1.254 in the address bar (where you would normally enter the
web site address) as per the illustration below.
2. You will be presented with a user name and password prompt.* Simply enter
user name as admin, password as admin and click OK. This will take you to
the modem’s Status page.
* If the user name and password prompt box does not appear make sure that any
firewall or anti-virus such as Trend Micro or Norton is disabled. Also ensure that your
Internet settings are correct. (In Internet Explorer go to Tools/Internet
Options/Connections and make sure “Never dial a Connection” is checked. Then
Click on the LAN settings and ensure “Automatically detect settings” is checked and
all other fields are blank. Then go to Tools/Internet Options/Security and return your
Security settings to “default”. )
6
3. From the Menu on the left select Quick Start.
4. Ensure the Connect Mode is ADSL and click on Continue. (if you are using
the router in 3G mode only, you can Jump to Wireless settings and set up
your wireless security as outlined overleaf)
7
5. Enter your Username and Password as supplied by your Internet Service
Provider in the relevant fields, and click Apply.
6. From the drop down menu in the Security Mode field you can choose your
preferred wireless security (or keep the wireless security disabled.) Please ensure
your wireless adaptor or laptop is compatible with your chosen security mode.
8
7. For WPA you should enter an alphanumeric password (numbers and letters) of
between 8 and 64 characters in the WPA Shared Key field and click Apply.
8. Please wait while the router applies the new settings.
9
9. This completes the ADSL and wireless security configuration.
10. You should now be connected to the Internet. You can check your connection
on the Status page by selecting Status from the menu on the left-hand side.
10
11. You are now ready to set up your 3G connection.
2.2 Setting up your 3G connection:
You can configure your 3G connection to act as a backup (Autofailover mode),
or as your primary connection. In Autofailover mode the router is designed to
automatically failover to 3G should your ADSL line go down, and automatically
revert back to ADSL (failback) when your line is reconnected.
Please insert your 3G USB dongle or USB stick with SIM firmly into the
USB port in the back of the router.
N.B. For setting up the router in 3G mode only, please go to section 2.4.
now.
2.3 Configuration of your 3G connection in Autofailover mode:
1. From Status page, select Advanced>Configuration>WAN>WAN Interface.
Other manuals for BiPAC 7402X Series
1
This manual suits for next models
5
Table of contents
Other Billion Network Router manuals
Billion
Billion BiPAC 7402 User manual
Billion
Billion BiPAC 5200N RC User manual
Billion
Billion BiPAC VGL User manual
Billion
Billion BiPAC 7401VP User manual
Billion
Billion BiPAC 5200G R4 Series User manual
Billion
Billion BiPAC 7401V(G)PX User manual
Billion
Billion BiPAC 8800NL User manual
Billion
Billion BiPAC 5210S RC Owner's manual
Billion
Billion M500 User manual
Billion
Billion BiPAC 4700ZUL User manual
Billion
Billion BiPAC 5100 User manual
Billion
Billion BiPAC 7300M User manual
Billion
Billion BiPAC 7300VGP User manual
Billion
Billion BiPAC 7402X Series User manual
Billion
Billion BiPAC 7402(G)(L) R3 Series User manual
Billion
Billion BiPAC 7300G User manual
Billion
Billion BIPAC-645 User manual
Billion
Billion BiPAC 7800VDPX User manual
Billion
Billion BiPAC 8501 User manual
Billion
Billion BiPAC 5200G Series User manual
