1 v1.0
1. After connecting the power cord, the unit will be operational in 60 seconds.
*Note: There is no record button on the unit. Please refer to the
Record Setup section for the proper record settings.
2. Press the “Menu” button ormove themouse pointer to thetop of the screen
and then select (Setup) in the Live Monitoringmenu, enter the password
then press the button. There is no default password when logging inthe
admin user for the first time. To assure thesecure management of the
system, setting up a password is strongly recommended.
1. Go to “System -> General” to name the site location, assign a System
ID number, select the language the screens are displayed in, display
software version number, upgrade the software, import or export the
DVR settings, show the System Log, clear all data and shut the
system down.
2. Go to “System -> Date/Time” to enter a new date and time.
3. Go to “System -> User” to add and delete groups and users.
4. Go to “System -> Storage” to display information about the DVR’s
storage devices.
5. Go to “System -> System Event” to check the system events and set
the actions the DVR will take when it detects system events.
*NOTE: Before powering down the DVR (or logging out the current
user) highlight System Shutdown from the System –General menu
and press the button, and confirm whether or not you want to
shut the system down (or logging out the current user).
1. Go to “Record -> General” to configure recording settings.
Highlighting Recycle and pressing the button toggles between
On and Off. In the Recycle mode, the DVR records over the oldest
video data once all available storage space has been used. When
Recycle is turned off, the DVR stops recording once all available
storage space has been used.
2. Go to “Record -> General” to configure recording settings. Highlight
Use Panic Recording and press the button to toggle between
On
and Off. When setting to On, set the length of time of the duration,
images per second and quality for panic recording.
3. Go to “Record -> Schedule” to program the DVR to record only
during certain times based on time, day of the week, and holidays.
Highlight Schedule On and press the button to toggle between
On
and Off. In the Schedule On mode, the DVR records video based
on the schedule established in the Schedule screen. When turning
Schedule recording Off, you will be asked to confirm your decision.
Panic recording will function even when Schedule is turned off.
4. Select the schedule mode between Simple Mode and Advanced
Mode first. Highlight the + and press the button to add a
schedule
item, and highlight the box under the X heading and press the
button to delete the recording settings.
*NOTE: Refer to the User’s Manual for each schedule mode
details.
5. Go to “Record -> Pre-Event” to set up pre-event recording. You can
turn individual cameras On or Off for pre-event recording and set
the image speed, image quality, resolution and the amount of time
to record prior to the event (dwell). When the DVR is in the Time
or Time & Event mode, it ignores the pre-event settings and
follows the time settings.
1. Go to “Network -> General” to set the transfer condition for remote
watch, limit bandwidth used to the remote site and configure the
WebGuard service.
2. Go to “Network -> LAN” to select the type of network configuration
first then set up LAN parameters for the selected network
configuration.
3. Go to “Network -> WebGuard” to set the DVR accessible from a
browser.
Go to “Event -> Motion, Alarm-In, Video Loss, Video Blind and Text-In” to
set up each event and set the actions the DVR will take when it detects
the event.
