Atmel ATSAMB11 BluSDK SMART User manual

ATSAMB11 BluSDK SMART

Health Thermometer Profile - Getting Started Guide

USER GUIDE

Introduction

The Health Thermometer Profile is used to enable a data collection device to obtain data from a

thermometer sensor that exposes the Health Thermometer Service.

The profile defines two roles:

Thermometer:

The Thermometer is the device that measures the temperature.

Collector:

The Collector is the device that receives the temperature measurement and other data from a

thermometer.

Features

Device Discovery and Disconnection

Pairing/Bonding

RSSI Sampling

Health Thermometer Service

Health Thermometer Profile iOS/Android Application

Atmel-42601A-ATSAMB11-BluSDK-SMART-Health-Thermometer-Profile-Getting-Started-Guide_UserGuide_112015

ATSAMB11 BluSDK SMART –Health Thermometer Profile –Getting Started Guide [USER GUIDE]

Atmel-42601A-ATSAMB11-BluSDK-SMART-Health-Thermometer-Profile-Getting-Started-Guide_UserGuide_112015

Table of Contents

1Purpose .....................................................................................................................3

2Services and Characteristics......................................................................................3

3Demo Setup..................................................................................................................3

4Hardware Setup ...........................................................................................................3

5Temperature Measurement Location..........................................................................4

6Temperature Type........................................................................................................4

7Software Setup.............................................................................................................5

7.1 Installation Steps...................................................................................................................................5

7.2 Build Procedure.....................................................................................................................................5

8Console Logging .........................................................................................................7

9Running the Demo.......................................................................................................7

10 BluSDK SMART Software Architecture....................................................................10

11 ATMEL EVALUATION BOARD/KIT IMPORTANT NOTICE AND DISCLAIMER........11

12 Revision History ........................................................................................................12

ATSAMB11 BluSDK SMART –Health Thermometer Profile –Getting Started Guide [USER GUIDE]

Atmel-42601A-ATSAMB11-BluSDK-SMART-Health-Thermometer-Profile-Getting-Started-Guide_UserGuide_112015

1 Purpose

This getting started guide describes the setup of an Atmel®ATSAMB11 Xplained board and bringing up

an example profile supplied as part of BluSDK SMART release. The Bluetooth®Health Thermometer

Profile is an example profile application that is embedded as part of the software release package. The

device advertises itself as a Health Thermometer. The ATSAMB11 Xplained board includes an on-board

temperature sensor (accessible from the host MCU) for the purpose of sensing the ambient temperature.

2 Services and Characteristics

The thermometer implements the one and only one Health Thermometer Service in addition to the Device

Information Service to display the information about the thermometer device.

The current thermometer profile implementation implements the following characteristics:

Temperature Measurement

Intermediate Temperature

Measurement Interval

3 Demo Setup

4 Hardware Setup

Connect the ATSAMB11 board to the host PC using a Micro-USB cable.

Figure 4-1. EDBG USB Port

BLE Link

iPhone®/Android

Running the Sensor App

(Collector)

ATSAMB11

(Thermometer)

ATSAMB11 BluSDK SMART –Health Thermometer Profile –Getting Started Guide [USER GUIDE]

Atmel-42601A-ATSAMB11-BluSDK-SMART-Health-Thermometer-Profile-Getting-Started-Guide_UserGuide_112015

5 Temperature Measurement Location

Onboard the ATSAMB11, the user button is configured to change the temperature measurement location

in the human body.

The Health Thermometer profile specifies the following locations at which temperature measurements can

be read:

Body (general)

Ear (usually ear lobe)

Finger

Gastro-intestinal Tract

Mouth

Rectum

Toe

Tympanum (ear drum)

In order to simulate the change of temperature measurement location from the Thermometer Sensor

device, the user button is preprogrammed; Every time the user button is pressed, the temperature location

will be changed as per the above list.

This can clearly be observed on a Health Thermometer Collector (Mobile Application).

6 Temperature Type

One more parameter that needs to be simulated is the temperature measurement type which contains two

units of measurement; Centigrade and Fahrenheit.

To simulate this change on the peripheral side, as there is only one user button available on board which

had already been used for changing the temperature location, the trigger that is used for this is to run

through all the locations once. Then the application shall toggle the temperature type.

ATSAMB11 BluSDK SMART –Health Thermometer Profile –Getting Started Guide [USER GUIDE]

Atmel-42601A-ATSAMB11-BluSDK-SMART-Health-Thermometer-Profile-Getting-Started-Guide_UserGuide_112015

7 Software Setup

7.1 Installation Steps

1. Install the latest Atmel Studio [Atmel Studio 7.0 (build 629 or later) web installer

(recommended)]

http://www.atmel.com/tools/ATMELSTUDIO.aspx.

2. Install the latest Atmel Software Framework.

This package will install the following examples within the Atmel Studio environment:

Health Thermometer Application for ATSAMB11

7.2 Build Procedure

The following procedure is explained for ATSAMB11 application example.

1. Select New Example Project.

Figure 7-1. Creating a New Example Project

2. Select “SAMB11” in device family, enter “HTP” in the search window, and expand Atmel Corp

Projects. The location and the name of the project can be selected in the respective fields. Click

OK.

Figure 7-2. Selecting Scan Parameter Service Application from Example Projects

3. Accept the license Agreement. The studio will generate the Health Thermometer Profile project for

ATSAMB11.

4. Build the solution.

ATSAMB11 BluSDK SMART –Health Thermometer Profile –Getting Started Guide [USER GUIDE]

Atmel-42601A-ATSAMB11-BluSDK-SMART-Health-Thermometer-Profile-Getting-Started-Guide_UserGuide_112015

Figure 7-3. Building the HTPT Temperature Sensor Application

5. Download the application via the USB to the ATSAMB11 board.

Figure 7-4. Flashing the Application on Atmel MCU

6. Inside the device programming the user has to select the correct configuration for the device and

finally program the device by using the program button.

Figure 7-5. Flash Programming

7. Once the application is flashed, it is ready to be simulated as Health Thermometer Device.

ATSAMB11 BluSDK SMART –Health Thermometer Profile –Getting Started Guide [USER GUIDE]

Atmel-42601A-ATSAMB11-BluSDK-SMART-Health-Thermometer-Profile-Getting-Started-Guide_UserGuide_112015

8 Console Logging

For the purpose of debugging, a logging interface has been implemented in the Health Thermometer

Application.

The logging interface utilizes the same EDBG port that connects to ATSAMB11. A serial port monitor

application (for example TeraTerm) shall be opened and attached to the EDBG COM port.

9 Running the Demo

1. Power on the ATSAMB11 by connecting the USB cable.

2. Open the console using TeraTerm or any serial port monitor application and connect to the

corresponding COM port of “EDBG”. Serial port settings: Baudrate 115200, None Parity, one Stop

bit, one Start bit, no Hardware Handshake.

3. Press the Reset button on the ATSAMB11 board.

4. The board should be in advertising mode. Ensure that the console log looks as shown below.

Figure 9-1. Console Log for Advertising Mode

App_entry ====================

AT_BLE_HTPT_CREATE_DB_CFM / 0

Please fine ATMEL-B11-HTP device

5. Start the Thermometer application on the iPhone/Android.

Figure 9-2. iOS(left)/Android(right) Thermometer Profile App Launch Screen

6. Enable the scan option through the sliding switch. The application is implemented in such a way

that it filters out all the other UUID’s and connects to only those peripherals that advertise with

Health Thermometer UUID (0x1809).

ATSAMB11 BluSDK SMART –Health Thermometer Profile –Getting Started Guide [USER GUIDE]

Atmel-42601A-ATSAMB11-BluSDK-SMART-Health-Thermometer-Profile-Getting-Started-Guide_UserGuide_112015

Figure 9-3. iOS(Left-1-image)/Android(Right-2-images) App Health Thermometer Initial Screen

7. The temperature value, RSSI, and the device name are all displayed on the Mobile App. Console

log will be as shown below.

Figure 9-4. iOS(Left)/Android(Right-2-images) App Health Thermometer Connected Screen

ATSAMB11 BluSDK SMART –Health Thermometer Profile –Getting Started Guide [USER GUIDE]

Atmel-42601A-ATSAMB11-BluSDK-SMART-Health-Thermometer-Profile-Getting-Started-Guide_UserGuide_112015

Figure 9-5. Console Log for Connected State

app_entry =======================

AT_BLE_HTPT_CREATE_DB_CFM / 0

Please find ATMEL-B11-HTP device

AT_BLE_CONNECTED / 2, 0x43, 0x15, 0xdb, 0x9c, 0xd0, 0x53, 0, 0

AT_BLE_PAIR_REQUEST /

AT_BLE_PAIR_DONE /

AT_BLE_HTPT_CFG_INDNTF_IND / 0, 2, 0

AT_BLE_HTPT_CFG_INDNTF_IND / measurement_interval 5

AT_BLE_HTPT_CFG_INDNTF_IND / 0, 1, 2

htpt_temperature_send / at_ble_htpt_temp_send / 28.062500

HTPT_TEMP_SEND_CFM / 0, 0, cfm_type 1

htpt_temperature_send / at_ble_htpt_temp_send / 28.062500

HTPT_TEMP_SEND_CFM / 0, 0, cfm_type 1

8. To change the body measurement location, press the user button on the ATSAMB11. The new

value should be updated in the application.

Figure 9-6. The User Button

9. In the iOS app, pull the slider to disconnect the device with mobile application. On the Atmel

SmartBLU Android application, going back to the scanning screen will disconnect the device with

mobile application.

ATSAMB11 BluSDK SMART –Health Thermometer Profile –Getting Started Guide [USER GUIDE]

Atmel-42601A-ATSAMB11-BluSDK-SMART-Health-Thermometer-Profile-Getting-Started-Guide_UserGuide_112015

10 BluSDK SMART Software Architecture

Figure 10-1 illustrates the top level diagram for the ATSAMB11 configuration.

Figure 10-1. ATSAMB11 Software Architecture

Other manuals for ATSAMB11 BluSDK SMART

Table of contents

Other Atmel Microcontroller manuals

Atmel

Atmel AVR User manual

Atmel

Atmel ATmega48A User manual

Atmel

Atmel ATmega32M1 User manual

Atmel

Atmel AT43DK325 User manual

Atmel

Atmel AVR365 User manual

Atmel

Atmel ATmega168PB Xplained Mini User manual

Atmel

Atmel UC3 Series User manual

Atmel

Atmel AVR2060 User manual

Atmel

Atmel XMEGA A3 series User manual

Atmel

Atmel AT89C5131A-L User manual

Atmel

Atmel AVR262 Installation and operating instructions

Atmel

Atmel SAM L21 Xplained Pro User manual

Atmel

Atmel AT90S2313 User manual

Atmel

Atmel AT97SC3205T-SDK2 User manual

Atmel

Atmel AVR461 User manual

Atmel

Atmel AVR XMEGA D Series User manual

Atmel

Atmel ATBTLC1000 BluSDK User manual

Atmel

Atmel ATSAMB11 BluSDK SMART User manual

Atmel

Atmel AT88CK109STK3 Installation manual

Atmel

Atmel Atmel-ICE User manual

Atmel

Atmel AT88RF1354 User manual

Atmel

Atmel AVR AT90S4434 User manual

Atmel

Atmel ATF15 DK2 Series User manual

Atmel

Atmel AT90USB162 User manual

Popular Microcontroller manuals by other brands

AMS

AMS AS7261 Demo Kit user guide

Novatek

Novatek NT6861 manual

Espressif Systems

Espressif Systems ESP8266 SDK AT Instruction Set

Nuvoton

Nuvoton ISD61S00 ChipCorder Design guide

STMicrolectronics

STMicrolectronics ST7 Assembler Linker user manual

Texas Instruments

Texas Instruments Chipcon CC2420DK user manual

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM user guide

NEC

NEC 78GK0S/K 1+ Series Application note

Mikroe

Mikroe SEMITECH N-PLC Click Application note

Intel

Intel Agilex user guide

Cypress

Cypress CY4607 HX2VL quick start guide

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE manual

Texas Instruments

Texas Instruments TMS320F2837 D Series Workshop Guide and Lab Manual

CYPRES

CYPRES CY14NVSRAMKIT-001 user guide

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM user guide

Espressif Systems

Espressif Systems ESP8266EX Programming guide

Abov

Abov AC33M8128L user manual

Laird

Laird BL654PA user guide