Atdec AWM-HS User manual

AWM-HS Page 1 of 2

Installation Guide

AWM-HS

Slider

COMPONENT CHECKLIST

REQUIRED TOOLS

• Phillips Head Screwdriver

A

Slider

Assembly

(x1)

C

Screw

M4x10mm

(x4)

B

2.5mm

Allen key

(x1)

0 - 7kg

(0 - 15lbs)

Monitor weight should be

within the weight range of

all modular elements that

make up the complete

monitor mounting solution.

IMPORTANT INFORMATION

! Please ensure this product is installed as per these installation instructions.

! Curved monitors, deep devices (such as all-in-one PCs) and offset VESA locations exert additional leverage that can exceed

the capacity of the mount even though the monitor weight may be within the stated range.

! The manufacturer accepts no responsibility for incorrect installation.

! This product is compatible with AWM Series monitor arms: AWM-A13, AWM-A46, AWM-A71 and AWM-AD.

WEIGHT RANGE

AWM-HS Page 2 of 2

1. Attach slider to monitor

1.1 Fix the slider onto

monitor using the

provided screws.

Slider orientation should match your desired

monitor orientation, landscape or portrait.

Note: Ensure the lever is unlocked when tting.

3. Adjust the monitor position

3.1 To adjust the monitor’s horizontal position,

tilt it back slightly and slide left or right.

3.2 To level the screen simply rotate it

to the desired position.

3.3 (Optional) Monitor rotation

tension may be adjusted by

tightening or loosening a small

screw with the provided allen key.

PUSH

SLIDE

+/-

10°

atdec.com | atdec.co.uk | atdec.com.au

No portion of this document or any artwork contained herein should be reproduced in any way without

the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer

reserves the right to alter specifications without notice. ©20190208

2. Mount slider on arm

2.1 Mount slider onto the monitor arm 2.3 Push the lever down to secure

it to the arm assembly

2.2 Ensure that the slider is seated fully into

the receptacle at the end of the monitor arm.

There should be no gap.

Gap No gap

Table of contents

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 