ATCOM AT-620 User manual
AT-620 Quick Start Guide
ATCOM TECHNOLOGY CO., LIMITED
AT-620 Quick Start Guide
ISSUE 1.0
2009-7-6
AT-620 Quick Start Guide
ATCOM TECHNOLOGY CO., LIMITED
1、Installation and access.................................................................................................................3
2、Configure AT-620 to make VoIP calls.........................................................................................4
A、WAN Config ..............................................................................................................................4
B、SIP Config..................................................................................................................................5
C、IAX2 config................................................................................................................................5
AT-620 Quick Start Guide
ATCOM TECHNOLOGY CO., LIMITED
1、Installation and access
Installation:
Set up AT-620 as below:
If AT-620 is connect to your network. Press Navigation button up or down to get
the WAN IP address.
Modify your computer’s IP address to the same network as AT-620
Key in AT-620’s IP address in the web browser and press enter, then you can
access AT-620’s web manage interface. Remember the account is admin/admin
for administrator and guest/guest for user.
AT-620 Quick Start Guide
ATCOM TECHNOLOGY CO., LIMITED
2、Configure AT-620 to make VoIP calls
A、WAN Config
Enter Network
Æ
WAN Config to set the WAN setting:
AT-620 supports three different IP types: Static IP, Dynamic obtain IP (DHCP)
and PPPoE. You can use either of these IP types to connect the internet.
Use Static IP:
----Select “Static”;
----Enter the AT-620’s IP address in the “IP address” field.
----Set the “Net mask”, default 255.255.255.0
----Enter the AT-620’s upper gateway IP address (for example: Router) in the
“Gateway” field
----Key in the DNS information in the “Primary DNS” and “Alter DNS” fields.
Use DHCP:
----Select DHCP
If you have a DHCP server in your network, AT-620 will automatically obtain the
network information from your DHCP server.
Use PPPoE:
----Select PPPoE
----Type your PPPoE dialup information in the PPPoE setting fields: PPPoE server
(option), Username and password.
Then the AT-620 will connect to the internet through PPPoE, and automatically
obtain the IP address, Net mask, Gateway, Primary DNS and Alter DNS
information.
AT-620 Quick Start Guide
ATCOM TECHNOLOGY CO., LIMITED
B、SIP Config
Enter VoIP
Æ
SIP Config setting page and set the sip information
----Register ServerAddr: sip server address;
----Register Server Port : sip server register port;
----Register Username : username of your sip account;
----Register Password : password of your sip account;
----Register Number : Phone number of your sip account; the same as username
if none
----check Enable Register；
Then you can make VoIP calls if the WAN and SIP config is correct.
Notice: Please go to the “Config Manage” and save the config, otherwise you will lose the setting
after device reboot.
C、IAX2 config
AT-620 Quick Start Guide
ATCOM TECHNOLOGY CO., LIMITED
9Above is the IAX server configuration page
9IAX Server Addr: Register address of public IAX server
9IAX Server Port: Register port of public IAX server，default port is 4569
9Account Name: Username of your SIP account (Always the same as the
phone number)
9Account Password: Password of your IAX account.
9Local port: Signal port of local, default port is 4569
9Phone Number: Phone number of your IAX account.
9Voice mail number: If the IAX support voice mail, but your username of the
voice mail is letters which you cannot input with the ATA , then you use the
number to stand for your username.
9Voice mail text: if IAX support voice mail, config the domain name of your
mail box here.
9Echo test number: If the platform support echo test , and the number is test
form , the config the test number to replace the text format The echo test is
to test the error status of terminals and platform
9Echo test text: echo test number in text format
9Refresh time: IAX refresh time
9Enable Register: enable or disable register
9Enable G.729: Using G.729 speech coding mandatory consultations
Other manuals for AT-620
1
Table of contents
Other ATCOM IP Phone manuals
ATCOM
ATCOM A2SV Series User manual
ATCOM
ATCOM Rainbow4(s) User manual
ATCOM
ATCOM A10 User manual
ATCOM
ATCOM R3(s) User manual
ATCOM
ATCOM D2SV User manual
ATCOM
ATCOM AT810 series User manual
ATCOM
ATCOM D2SV-LW User manual
ATCOM
ATCOM AT800 Series User manual
ATCOM
ATCOM AT810P Owner's manual
ATCOM
ATCOM AT800 Series User manual
ATCOM
ATCOM 5520 User manual
ATCOM
ATCOM Nimbus CQ400 User manual
ATCOM
ATCOM AT840 series User manual
ATCOM
ATCOM A20 User manual
ATCOM
ATCOM AU120 User manual
ATCOM
ATCOM r2 User manual
ATCOM
ATCOM AT820 series Owner's manual
ATCOM
ATCOM AT840 series User manual
ATCOM
ATCOM AT-640P User manual
ATCOM
ATCOM D2X User manual
