ATCOM AT-610 User manual
AT-610 Quick Start Guide
ATCOM TECHNOLOGY CO., LIMITED
AT-610 Quick Start Guide
ISSUE 1.0
2009-9-11
AT-610 Quick Start Guide
ATCOM TECHNOLOGY CO., LIMITED
1、Installation and access.................................................................................................................3
2、Configure AT-610 to make VoIP calls.........................................................................................4
A、WAN Config ..............................................................................................................................4
B、SIP Config..................................................................................................................................5
AT-610 Quick Start Guide
ATCOM TECHNOLOGY CO., LIMITED
1、Installation and access
Installation:
Set up AT-610 as below:
If AT-610 is connect to your network. Press Info key to get the WAN IP address.
Modify your computer’s IP address to the same network as AT-610
Key in AT-610’s IP address in the web browser and press enter, then you can
access AT-610’s web manage interface. Remember the account is admin/admin
for administrator and guest/guest for user.
AT-610 Quick Start Guide
ATCOM TECHNOLOGY CO., LIMITED
2、Configure AT-610 to make VoIP calls
A、WAN Config
Enter Network
Æ
WAN Config to set the WAN setting:
AT-610 supports three different IP types: Static IP, Dynamic obtain IP (DHCP)
and PPPoE. You can use either of these IP types to connect the internet.
Use Static IP:
----Select “Static”;
----Enter the AT-610’s IP address in the “IP address” field.
----Set the “Net mask”, default 255.255.255.0
----Enter the AT-610’s upper gateway IP address (for example: Router) in the
“Gateway” field
----Key in the DNS information in the “Primary DNS” and “Alter DNS” fields.
Use DHCP:
----Select DHCP
If you have a DHCP server in your network, AT-610 will automatically obtain the
network information from your DHCP server.
Use PPPoE:
----Select PPPoE
----Type your PPPoE dialup information in the PPPoE setting fields: PPPoE server
(option), Username and password.
Then the AT-610 will connect to the internet through PPPoE, and automatically
obtain the IP address, Net mask, Gateway, Primary DNS and Alter DNS
information.
AT-610 Quick Start Guide
ATCOM TECHNOLOGY CO., LIMITED
B、SIP Config
Enter VoIP setting page and set the sip information
----Register ServerAddr: sip server address;
----Register Server Port : sip server register port;
----Register Username : username of your sip account;
----Register Password : password of your sip account;
----Register Number : Phone number of your sip account; the same as username
if none
----check Enable Register；
Then you can make VoIP calls if the WAN and SIP config is correct.
Notice: Please go to the “Config Manage” and save the config, otherwise you will lose the setting
after device reboot.
Other manuals for AT-610
3
Table of contents
Other ATCOM IP Phone manuals
ATCOM
ATCOM AT-320 H323 User manual
ATCOM
ATCOM AT820 series User manual
ATCOM
ATCOM AT-610P User manual
ATCOM
ATCOM Rainbow1 User manual
ATCOM
ATCOM AT800D User manual
ATCOM
ATCOM AT-620 User manual
ATCOM
ATCOM AT810 series User manual
ATCOM
ATCOM AT840 series User manual
ATCOM
ATCOM AT840P Owner's manual
ATCOM
ATCOM D2SV User manual
ATCOM
ATCOM AT-620P User manual
ATCOM
ATCOM AT-640P User manual
ATCOM
ATCOM A1XW series User manual
ATCOM
ATCOM D2SV-LW User manual
ATCOM
ATCOM A2SV Series User manual
ATCOM
ATCOM A68w User manual
ATCOM
ATCOM AT530P User manual
ATCOM
ATCOM AT800D User manual
ATCOM
ATCOM Rainbow4(s) User manual
ATCOM
ATCOM AT-323 User manual
