Arlo Arlo Go User manual
1
Arlo Go Quick Start Guide
3
What’s in the box
Arlo Go camera Rechargeable
battery
Mount and screws Synthetic
grease
Arlo Go
USB port cap
Arlo Go
wind bracket
Outdoor power adapter
(varies by region)
4
Your mobile network access
A Verizon SIM card comes with your Arlo Go camera. The SIM card is
installed and activated by Verizon Wireless.
Your Arlo Go camera uses the mobile network during setup and to send
recordings to your Arlo account in the cloud.
Consider the following mobile network support options:
My Verizon. Manage your account, track your usage, edit account
information, pay your bill and more at verizonwireless.com/MyVerizon or
with the My Verizon app on your mobile device.
Customer service. Call (800) 922-0204. Follow us at @VZWSupport.
Documentation. Download the User Manual from
verizonwireless.com/support/phones-and-devices/.
5
Insert your SIM card
The Arlo Go camera comes with a Verizon SIM card installed. If a SIM card
is not installed, insert a card into the SIM card slot.
1. Unlock the Arlo Go battery compartment by pressing and holding
the latch.
2. Gently pull the battery door back to open the compartment.
3. Align the gold SIM contacts.
4. Insert the SIM card into the SIM card slot.
6
Insert the battery
1. Unlock the battery compartment by pressing and holding the
latch.
2. Gently pull the battery door back to open the compartment.
3. If you plan to store video recordings on an SD card, insert the SD
card now.
4. Align the battery contacts.
5. Insert the battery.
6. Close the battery door.
7
Get the app
Download the free Arlo app to get started.
The app guides you through installation.
8
Mount your camera
1. Place the wall plate and secure it with three screws.
2. Attach the camera to the wall plate.
If you’re mounting the camera to drywall, be sure to use the
included plastic drywall anchors.
9
If you’re plugging in the camera outdoors
Pay attention to the weather and to power outlet safety considerations:
• You must use an Arlo Go outdoor
power adapter. Do not use any other
power adapter.
• Install the the wind bracket for
support between the camera and the
power adapter.
• Connect the Arlo Go outdoor power
adapter only to a weatherproof power
outlet.
10
Install the wind bracket
1. Remove the USB port cap from the camera by pulling firmly on
the cap.
2. Slide the wind bracket onto the power adapter cable.
3. Apply a thin layer of synthetic grease around the cable
connector end.
4. Connect the cable connector to the USB port on your camera
and press in firmly.
Extra USB port caps
are included so that
you can use the camera
wire-free later.
Other manuals for Arlo Go
5
Table of contents
Other Arlo Security Camera manuals
Arlo
Arlo VMC2020 User manual
Arlo
Arlo Arlo Go User manual
Arlo
Arlo VMC3030 User manual
Arlo
Arlo Pro 2 User manual
Arlo
Arlo Pro HD 2 User manual
Arlo
Arlo Arlo Go User manual
Arlo
Arlo FlexPower VNC4030-111PAS User manual
Arlo
Arlo Essential XL Outdoor Cameras User manual
Arlo
Arlo Pro 2 User manual
Arlo
Arlo Go 2 User manual
