AnyTone DORIS User manual
CB RADIO
DORIS
Instruction Manual
Microphone
Adjusting screws
(2 pieces)
DC Power Cable
with Fuse Holder
Self-tapping
Screws
(6 pieces)
Pads for
bracket
(6 pieces)
Microphone
Hanger
Mounting
Bracket
Spare Fuses
(5A,250V)
Radio
1. ACCESSORIES
1DORIS CB Radio
2. KNOW ABOUT THIS RADIO
2.1 Front panel function
After pressing the PUSH button, press the following buttons to enter function：
NO. Button Function
1 Power On/ Off button
2 Mute/ Keypad lock button
3 Squelch function/ Store memory channel function button
4 VOX function button
5ASQ (Automatic Squelch Control) function/
Store memory channel function button
6 Channel switch/ Store memory channel function button
7 Modulation switch button
8 CTCSS/DCS function / Store memory channel function button
9 Scan channel function button
10 Emergency channel button
11 Volume knob/ Push/ Function menu button
12 MIC Microphone interface
13 LCD Display the status of channel/frequency and various function settings
1
2
12
3 6 74
5 9 1113 10 8
Button Function
Choose storage memory channel M1
Choose storage memory channel M2
Choose storage memory channel M3
Choose storage memory channel M4
DORIS CB Radio 2
Down UP
Microphone cable
Mic
PTT
Connector
Hold on pressing the following buttons to enter function：
Button Function
Store/ delete memory channel M1
Store/ delete memory channel M2
Store/ delete memory channel M3
Store/ delete memory channel M4
Add/ remove scan channel list
2.2 Rear Panel
NO. Button Function
1 Antenna Interface Install the antenna here, the impedance is 50Ω
2External Speaker Jack Connect the optional external speaker SP01 here
3 Power cable Connect the standard DC (Direct Current) power cable here
1
3
2
2.3 Microphone
3DORIS CB Radio
3. HOW TO USE THIS RADIO
3.1 Power On/Off the Radio ....................................................................
3.3 Quick Mute Setting ...........................................................................
3.4 Enter Stored Memory Channel and Exit Out .......................................
3.5 Store Memory Channel .....................................................................
3.6 Delete Memory Channel ...................................................................
3.2 Volume Adjustment ..........................................................................
(1) Power On the radio: Press the button, the screen will light up and display
"WELCOME", then the radios will show the current frequency or channel, it's on.
(2) Power Off the radio: Press the button for 2 seconds, the screen will display
“CLOSING”, then all the display will disappear, it's off.
Note: Set the volume level during a call to adjust the desired volume more accurately.
When the radio is under standby, turn the VOL knob to adjust the volume, turn it
clockwise to increase the volume, and turn it counterclockwise to decrease the
volume.
Under standby state, short press the key, the screen will display the mute icon
to enter mute mode; Short press the key again or turn the VOL knob, the screen
displays the volume level to exit the mute mode.
Enter Stored Memory Channel: Short press the [PUSH] button, the screen will
displays the “FUNC” icon, then press the corresponding M1-M4 to enter the
memory channel mode; Short press the CH/M3 button when the channel number is
blue, and then turn the VOL knob to exit the memory channel mode out.
In the non-storage channel, select the channel you want to store, and hold on press
the corresponding M1-M4 button until the screen displays the storage channel
number and emits a "DiDi" sound, and the storage is completed.
Under the storage channel, hold on press the corresponding M1-M4 button until
the storage channel number displayed on the screen disappears and a "DiDi" beep
sounds, and the storage channel deletion is completed.
DORIS CB Radio 4
4. KEYPAD FUNCTION
4.1 Button ......................................................................................
4.2 Button .......................................................................................
4.3 Button .......................................................................................
4.4 Button .......................................................................................
4.5 Button .......................................................................................
4.6 Button .......................................................................................
Keypad Lock Function
(1) Hold on press the key for 2 seconds to turn on the keypad lock function, and
the screen will display the '' '' icon.
(2) Hold on press the key again for 2 seconds to turn off the keypad lock function.
Modulation Mode Selection
(1) Short press the button to switch the communication modulation mode AM/FM.
(2) The selected modulation mode will be displayed on the LCD.
SQ Level Selection
Short press the button to display the current SQ level on the LCD. You can select
the desired SQ level by rotating the VOL switch or pressing the [UP/DOWN] button of
the microphone. There are OFF and 1-34 levels to choose.
VOX Function
Short press the button to turn on the voice control function, short press the
button again to turn off the voice control function.
Automatic Squelch Level Selection
Short press the button to display the current ASQ level on the LCD. You can
select the desired ASQ level by rotating the VOL knob or pressing the [UP/DOWN]
button of the microphone. There are 1-9 levels to choose.
Channel Selection
In the channel mode, short press the button, when the channel number is blue,
turn the VOL knob or press the [UP/DOWN] button of the microphone to select the
desired channel. Turn clockwise to adjust to the next channel , turn counterclockwise
to the previous channel.
Note: When the key is locked, the PTT key /VOL switch knob is valid, and the other
keys are invalid.
5DORIS CB Radio
4.7 Button .......................................................................................
4.9 Button ....................................................................................
4.10 【PUSH】Button..............................................................................
4.8 Button ......................................................................................
CTCSS/ DCS Code Function
(1) Short press the button to enter the CTCSS/DCS encode and decode function,
and the screen will displays the "CTC or DCS" icon.
(2) Short press the button for the first time to enter the CTCSS encode and
decode signaling function.
(3) Short press the button for the second time to enter the DCS encode and
decode signaling function.
(4) Short press the button for the third time to turn off the CTCSS/DCS codec
encode and decode signaling function.
Emergency Channel Function
Short press the button to enter the emergency channel function, and the screen
displays the "EMG" icon.
(1) Short press the button once to choose the CH9 channel.
(2) Short press the button twice to choose the CH19 channel.
(3) Short press the key thrice to return to the original channel.
Hold on press the [PUSH] button for 2 seconds to enter the function menu setting.
Scan Function
(1) Short press the button to enter the scan function, and the screen will flashes
a red "S" icon.
(2) Under the scanning state, press the button and then turn the VOL knob or
press the [UP/DOWN] button of microphone to change the scanning direction.
(3) Short press the button or the PTT button again to exit scan.
Add/ Delete Scan List
(1) Hold on press the key for 2 seconds to set the current channel to be added to
the scan list or deleted it from the scan list.
(2) When the screen shows "S" icon, it means that the current channel is not in the
scan list, and the channel will not be scanned during scanning.
(3) When the screen doesn’t show "S" icon, it means that the current channel has
been added to the scan list, and the channel will be scanned when scanning.
DORIS CB Radio 6
4.11 Norms and Frequency .....................................................................
4.12 Install External Speakers .................................................................
(1) In the power off state, hold on press the A/F button to power on the radio and
displays the norms in LCD.
(2) Turn the knob or press the UP/DN button of the microphone to select norms.
(3) Turn off the radio to confirm selected norms and exit.
If you plan to install external speakers, choose speakers with 8Ω and a 3.5mm mono
(two-conductor) plug.
(1) Install the external speakers in an ideal position.
(2) Plug the speaker connector into jack.
Hold on press the [PUSH] button to enter SELECT MENU list, rotate the VOL knob to
select the FUNC MENU function;
Press the [PUSH] button to enter the FUNC MENU function menu list, rotate the VOL
knob to select the function options;
Press the [PUSH] button to enter the selected function, rotate the VOL knob for
setting, and press the [PUSH] button to save the setting;
Short press the EMG button to exit the function setting menu step by step.
5. FUNCTION MENU OPERATION
7DORIS CB Radio
5.1 FUNCTION MENU SETTING
NO. LCD display Function detail Setting details
1.1 Display brightness of
backlight setting
Option 1~5, there are 5 levels to choose;
Default: 5
1.2 Keypad brightness of
backlight setting
1~5, there are 5 levels to choose;
Default: 5
1.3 Keypad beep setting
OFF:Shut beep function
ON:Open beep function
Default: ON
1.4 Power on setting OFF:Turn off the automatic power-on function
ON:Turn on the automatic power-on function
1.5 Scan type setting SQ:SQ scan function
TI:Time scan function
1.6 Scan range setting
OFF:Turn off scan range function
ON:Turn on scan range function
Default: ON
Note: Set the scan begin channel or frequency
when “S” is displayed in the menu, and set the
scan stop channel or frequency when “E” is
displayed
1.7 Dual watch channel
setting
One of 1-40 channels can be set, the channel
before entering menu is another dual watch
channel
Default: 09
1.8 Dual watch function
setting
OFF: turn off the dual watch function.
ON: turn on the dual watch function.
Default : OFF
1.9 TOT settings
OFF~600S, 10 minutes to choose, OFF is to
turn off TOT function;
Default: 60S
1.10 RF gain setting
OFF/ AU/ 03/ 06/ 09~48, total 18 types to
select, OFF is to turn off the RF gain function;
Default: OFF
Note: If set the AUTO RFG function, the radio
will turn on the automatic RFG function.
DORIS CB Radio 8
1.11 Microphone type
settings
DY：Dynamic MIC
EL：Electronic MIC
Default: EL
1.12 Microphone
sensitivity settings
1~9, total 9 levels, the higher level the higher
sensitivity of microphone;
Default: level 6
1.13 TALK BACK function
settings
OFF/ 1~9, total 10 levels, the higher level the
louder it will sound;
Default: OFF
1.14 NC function settings
OFF：turn off NC function;
ON：turn on NC function;
Default: OFF
1.15 NG function settings
OFF：turn off NG function;
ON：turn on NG function;
Default: OFF
1.16 PA function settings
OFF：turn off PA function;
ON：turn on PA function;
Default: OFF
1.17 VOX sensitivity
settings
1~9, total 9 levels, the higher level the higher
sensitivity of VOX;
Default: level 3
1.18 VOX delay time
settings
1~9, total 9 levels, the higher level the longer
delay time of VOX;
Default: level 4
1.19 SWR protection
settings
OFF/ 2.0/ 2.5/ 3.0/ 4.0/ 5.0/ 10.0, OFF is to
turn off SWR protection function
Default: OFF
1.20 Power on display
settings
DEF PIC: default picture display
USET PIC: Customized picture display (can be
written by PC software)
CHAR: indicates the name
BAT: voltage display
Default : DEF PIC
1.21
RX NRC(Noise
reduction) function
setting
OFF: Turn off NRC function
ON: Turn on NRC function
Default: OFF (**Optional function, only have
this function when NRC PCB added)
1.22 Factory reset settings ALL the channels, function settings will be
back to factory default settings
Table of contents
Other AnyTone Radio manuals
AnyTone
AnyTone DMR AT-D878U User manual
AnyTone
AnyTone APOLLO I User manual
AnyTone
AnyTone ARES II User manual
AnyTone
AnyTone SMART II User manual
AnyTone
AnyTone AM-580 User manual
AnyTone
AnyTone AT-D868UV Operating instructions
AnyTone
AnyTone 578 Go Box DIY Kit User manual
AnyTone
AnyTone AT888 User manual
AnyTone
AnyTone AT-5289 User manual
AnyTone
AnyTone GRACES User manual
AnyTone
AnyTone MINI CB User manual
AnyTone
AnyTone AT-588UV User manual
AnyTone
AnyTone 868 User manual
AnyTone
AnyTone SMART User manual
AnyTone
AnyTone AT-500M User manual
AnyTone
AnyTone AT-D578UV User manual
AnyTone
AnyTone SMART User manual
AnyTone
AnyTone AT 778 User manual
AnyTone
AnyTone AT-598 User manual
AnyTone
AnyTone Ares User manual
