AnyTone AT-D578UV Setup guide

COPYRIGHT BY CONNECT SYSTEMS INC. PERMISSION IS GRANTED TO DISTRIBUTE OR POST

1

SETTING THE AT-D578UV RADIO TO THE DESIRED MODE

When you get the AnyTone mobile radio it might be set to a band you don’t really

want. You might want to use it commercially with FCC Part 90 certification, so you

set it to Mode 0 or 1. If you want to be triband, then set it to mode 18. This lesson

will explain how to set it to the desired band.

AnyTone Defines the bands to be used as follows:

Mode Use

0 European Commercial

1 U.S. Commercial

3 European Amateur

4 Band 4

5 Band 5

7 U.S. Amateur

8 Commercial

10 Canada/Australia Amateur

13 Commercial

16 Thailand Amateur

17 Thailand Commercial

18 Band 19 (US Amateur Tri-band)

COPYRIGHT BY CONNECT SYSTEMS INC. PERMISSION IS GRANTED TO DISTRIBUTE OR POST

2

The following is the frequency allocation of the bands available in the AnyTone

AT-D578UV

Mode # VHF Frequency UHF Frequency 220 Band Tx/Rx

0 136-174 400-480 Tx

136-174 400-480 Rx

1 136-174 400-480 Tx

136-174 400-480 Rx

3 144-146 430-440 Tx

136-174 400-480 Rx

4 144-146 434-438 Tx

144-146 434-438 Rx

5 144-146 434-437 Tx

144-146 434-437 Rx

7 144-148 420-450 Tx

136-174 400-480 Rx

8 136-174 400-470 Tx

136-174 400-470 Rx

10 144-148 430-450 Tx

136-174 400-480 Rx

13 136-174 403-470 Tx

136-174 400-480 Rx

16 144-147 430-440 Tx

144-147 430-440 Rx

17 136-174 Off Tx

136-174 430-440 Rx

18 144-148 420-450 222-225 Tx

136-174 400-480 220-225 Rx

COPYRIGHT BY CONNECT SYSTEMS INC. PERMISSION IS GRANTED TO DISTRIBUTE OR POST

3

To change bands, go through the following steps:

1. Connect radio to power, turn on power supply and turn off radio. The radio

should look like the following:

2. Press the P4 Key, Press the Channel Selector Switch, and press the power

switch in that order. Keep those three keys pressed.

3. In a short time, the screen should look like this:

COPYRIGHT BY CONNECT SYSTEMS INC. PERMISSION IS GRANTED TO DISTRIBUTE OR POST

4

4. Keep the keys pressed and in a short time, the screen should look like this:

5. Now let go of the three keys and the screen should look like the following:

COPYRIGHT BY CONNECT SYSTEMS INC. PERMISSION IS GRANTED TO DISTRIBUTE OR POST

5

6. A short time later the screen will change to the following:

7. Use the channel selector switch to change the mode from 00001 to 000018.

When you get your desired mode, press the menu key and you are finished.

8. Now attach your radio to your computer, activate the CPS, and read the

radio. Then click the “Model” pull down menu and you should get the

following:

9. The mode here should correspond to the mode you set the radio to.

Other manuals for AT-D578UV

2

Table of contents

Other AnyTone Radio manuals

Popular Radio manuals by other brands

EisSound

EisSound KBSound iSelect user manual

Midland

Midland 1001LWX owner's manual

Konig

Konig HAV-SR41 manual

Roberts

Roberts exprssion manual 

VDigi

VDigi DD3.0 Operation manual

Radio Shack

Radio Shack 21-1863 owner's manual

Roberts

Roberts Stream 207 instruction manual

Sony

Sony Walkman SRF-M97 Service manual

Stanley

Stanley FatMax FMC770 manual

auna

auna DAB-Radio 10026947 manual

SOUNDMASTER

SOUNDMASTER UR190 instruction manual

HYT

HYT TC-320 user manual

auna multimedia

auna multimedia Yellowstone 10026851 instructions

B-Tech

B-Tech GMRS-V2 manual

Weierwei

Weierwei VEV-V8 user manual

SOUNDMASTER

SOUNDMASTER DAB750 instruction manual

Telefunken

Telefunken TF-1505 instruction manual

Makita

Makita LXRM03 instruction manual