AMP VST1 User manual
AMN-V-C
TABLE OF CONTENTS
1.!INTRODUCTION 1!
1.1.!Purpose and Function 1!
1.2.!Capabilities 1!
1.3.!Environmental Requirements 1!
2.!VST1 TRANSMITTER 2!
2.1.!VST1 Specifications 2!
2.2.!VST1 Mechanical Drawing and Connector Pin-Outs 3!
2.3.!VST1 List of Items Furnished 3!
2.4.!VST1 Optional Accessories 3!
2.5.!VST1 List of Items Required 3!
3.!VSR1 RECEIVER 4!
3.1.!VSR1 Specifications 4!
3.2.!VSR1 Mechanical Drawing and Connector Pin-Outs 5!
3.3.!VSR1 List of Items Furnished 5!
3.4.!VSR1 Optional Accessories 5!
3.5.!VSR1 List of Items Required 5!
4.!VDR1 DIVERSITY RECEIVER 6!
4.1.!VDR1 Specifications 6!
4.2.!VDR1 Mechanical Drawing and Connector Pin-Outs 7!
4.3.!VDR1 List of Items Furnished 7!
4.4.!VDR1 Optional Accessories 7!
4.5.!VDR1 List of Items Required 7!
5.!SAFETY PRECAUTIONS 8!
6.!PREPARATION FOR USE 9!
6.1.!Unpacking 9!
6.2.!Transmitter Pre-Test 9!
6.3.!Receiver Pre-Test 9!
7.!INSTALLATION AND OPERATING INSTRUCTIONS 10!
7.1.!Use and Function of Connectors 10!
7.2.!Use and Function of Switches 10!
7.2.1.!Frequency Selection Switches: 10!
7.2.2.!LINE – MIC Switch (transmitters only) 10!
7.2.3.!RS232 – TTL Switch (transmitters only) 10!
7.2.4.!AUD ON – AUD OFF Switch 11!
7.2.5.!DAT ON – DAT OFF Switch 11!
7.2.6.!HIGH PWR – LOW PWR (transmitters only) 11!
7.2.7.!SECURE - CLEAR Switch 11!
7.2.8.!DIM / BRIGHT / OFF (receivers only) 11!
7.3.!Camera Supply Output (transmitters only) 11!
7.4.!Auxiliary Supply Output (receivers only) 12!
7.5.!Audio Output(s) (receivers only) 12!
7.6.!Signal Strength Meters (receivers only) 12!
7.7.!Use of Heat Sink 13!
7.8.!Mating Connectors 13!
7.9.!Initial Adjustments and Settings 14!
7.10.!Shut Down 14!
AMN-V-C
8.!MAINTENANCE INSTRUCTIONS 14!
8.1.!Cleaning 14!
8.2.!Troubleshooting 14!
8.3.!Preparation for Reshipment 15!
8.4.!Returning an Item 15!
9.!WARRANTY STATEMENT 16!
10.!FREQUENCY PROGRAMMING CHART 17!
AMN-V-C 1
1. INTRODUCTION
Thank you for choosing this AMP Wireless Video Product. Every effort has been made to design and
manufacture a quality product that will meet your surveillance needs for many years. Please visit our
website (www.advmw.com) for information on other products and for datasheets, quick start guides,
model number builders, operation manuals, and other related materials.
If you have any questions regarding this product or if you require technical assistance, please feel free to
contact us at (775) 345-9933.
1.1. Purpose and Function
V series Video/Audio/Data Transmitters and Receivers are developed and manufactured by Advanced
Microwave Products (AMP).
V series products are designed for color or monochrome video, audio, and data transmission. V series
transmitters/receivers are best operated with AMP’s V or P series receivers/transmitters but are
compatible with most other analog FM video receivers/transmitters on the market.
1.2. Capabilities
AMP Transmitters and Receivers are designed for harsh environments and feature robust packaging and
connectors. Compact package sizes provide versatility in unit placement and system applications.
AMP Transmitters and Receivers require no tuning or adjustments. All units operate directly with any
standard video camera or display. Power can be derived from batteries, simple power supplies, or
vehicle power.
Whip or “rubber duck” antennas are adequate for most applications.
1.3. Environmental Requirements
AMP Transmitters and Receivers are designed for indoor or outdoor use. Precautions should be taken
when exposing the products to the elements. Do not expose to 100% humidity.
Transmitters and Receivers should be located in areas where the ambient temperature does not exceed
the maximum operating temperature indicated in the specifications. Placement in confined locations with
minimal airflow, in direct sunlight in areas of temperature extremes, or in proximity to other devices that
generate heat, such as power supplies, heating systems, etc., should be avoided. Temperatures
exceeding +75°C may cause permanent damage to the equipment.
When not used for extended periods of time, external connections, including power cable, video cable,
and antenna, should be removed and the units covered, boxed, or crated and stored in a clean, dry place.
AMN-V-C 2
2. VST1 TRANSMITTER
2.1. VST1 Specifications
AMN-V-C 3
2.2. VST1 Mechanical Drawing and Connector Pin-Outs
2.3. VST1 List of Items Furnished
• (1) VST1 Transmitter (configured as ordered)
2.4. VST1 Optional Accessories
• WHSMDM9-SSLH0 - MDM-9S (Socket) DC Power Cable
• WHSMDM9-SPLH0 - MDM-9P (Pin) Audio/Data Cable
• CBLVD75-SA360 - 36" SSMA/BNC Coax
• SNK3520-S05B0 - Heatsink
2.5. VST1 List of Items Required
• Antenna, Type SMA Plug (Male) Connector
• Camera, Type BNC Jack (Female) Connector
• Video connector adapter to SSMA adapter
• Microphone(s) (as applicable)
• Heatsink (for 500mW, 1W, 2W versions)
AMN-V-C 4
3. VSR1 RECEIVER
3.1. VSR1 Specifications
AMN-V-C 5
3.2. VSR1 Mechanical Drawing and Connector Pin-Outs
3.3. VSR1 List of Items Furnished
• (1) VSR1 Receiver (configured as ordered)
3.4. VSR1 Optional Accessories
• WHSMDM9-SSLH0 - MDM-9S (Socket) DC Power Cable
• WHSMDM9-SPLH0 - MDM-9P (Pin) Audio/Data Cable
3.5. VSR1 List of Items Required
• Antenna, Type SMA Plug (Male) Connector
• Monitor, Type BNC Jack (Female) Connector
• Type BNC Plug (Male) to BNC Plug (Male) Video Cable
• Video connector adapter to BNC, if monitor does not have BNC connector
• Speaker or Headphones
• 3.5mm Stereo Plug to Dual Mono Adapter (if monitoring two mono audio sources)
AMN-V-C 6
4. VDR1 DIVERSITY RECEIVER
4.1. VDR1 Specifications
AMN-V-C 7
4.2. VDR1 Mechanical Drawing and Connector Pin-Outs
4.3. VDR1 List of Items Furnished
• (1) VDR1 Receiver (configured as ordered)
4.4. VDR1 Optional Accessories
• WHSMDM9-SSLH0 - MDM-9S (Socket) DC Power Cable
• WHSMDM9-SPLH0 - MDM-9P (Pin) Audio/Data Cable
4.5. VDR1 List of Items Required
• Two (2) Antennas, Type SMA Plug (Male) Connector
• Monitor, Type BNC Jack (Female) Connector
• Type BNC Plug (Male) to BNC Plug (Male) Video Cable
• Video connector adapter to BNC, if monitor does not have BNC connector
• Speaker or Headphones
• 3.5mm Stereo Plug to Dual Mono Adapter (if monitoring two mono audio sources)
Other manuals for VST1
1
This manual suits for next models
2
Table of contents
Other AMP Receiver manuals
