American Dryer Corp. AD-210 User manual

AD-210 / ML-210

Installation Manual

Phase 7 / Non-Coin / 650,000 Btu/hr

with Non-Tilting Options

ADC Part No. 113549-8

AVERTISSEMENT:

RISQUE D’INCENDIE OU D’EXPLOSION

Le non-respect des avertissements de

sécurité pourrait entraîner des blessures

graves, la mort ou des dommages

matériels.

– N’entreposer pas et n’utilisez pas

d’essence ni d’autres vapeurs ou

liquides inflammables dans le voisinage

de cet appareil ou de tout autre appareil.

– QUE FAIRE SI VOUS SENTEZ UNE

ODEUR DE GAZ

●●

●Ne tentez pas d’allumer d’appareil.

●●

●Ne touchez à aucun interrupteur. Ne

vous servez pas des téléphones se

trouvant dans le bâtiment où vous

vous trouvez.

●●

●Évacuez la pièce, le bâtiment ou la zone.

●●

●Appelez immédiatement votre

fournisseur de gaz depuis un voisin.

Suivez les instructions du fournisseur.

●●

●Si vous ne pouvez rejoindre le

fournisseur de gaz, appelez le service

des incendies.

– L’installation et l’entretien doivent être

assurés par un installateur ou un service

d’entretien qualifié ou par le fournisseur

de gaz.

WARNING:

FIRE OR EXPLOSION HAZARD

Failure to follow safety warnings exactly

could result in serious injury, death or

property damage.

– Do not store or use gasoline or other

flammable vapors and liquids in the

vicinity of this or any other appliance.

– WHAT TO DO IF YOU SMELL GAS

●●

●Do not try to light any appliances.

●●

●Do not touch any electrical switch;

do not use any phone in your

building.

●●

●Clear the room, building or area of

all occupants.

●●

●Immediately call your gas supplier

from a neighbor’s phone. Follow

the gas supplier’s instructions.

●●

●If you cannot reach your gas

supplier, call the fire department.

– Installation and service must be

performed by a qualified installer, service

agency or the gas supplier.

!!!

American Dryer Corporation

88 Currant Road, Fall River MA 02720-4781 USA

Telephone: +1 (269) 923-3000 / Fax: +1 (508) 678-9447

e-mail: [email protected] / www.adclaundry.com

We have tried to make this manual as complete as possible and hope you will find it useful. The manufacturer reserves the

right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to

change or discontinue models. The illustrations included in this manual may not depict your particular dryer exactly.

IMPORTANT

For your convenience, log the following information:

DATE OF PURCHASE ______________________________________________ MODEL NO. _________________________

RESELLER’S NAME ___________________________________________________________________________________

SERIAL NUMBER(S) ___________________________________________________________________________________

____________________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the

factory, you can FAX your order to ADC at +1 (508) 678-9447 or telephone your order directly to the ADC Parts

Department at +1 (269) 923-3000. Please specify the dryer model number and serial number in addition to the description

and part number, so that your order is processed accurately and promptly.

These instructions are only valid if the following country code is on the appliance… If this code is not present on the

appliance, it is necessary to refer to the technical instructions which will provide the necessary information concerning

the modification of the appliance to the condition of use for the country.

In accordance with EN ISO 3166-1, the names of countries shall be represented by the following codes:

GB United Kingdom

IE Ireland

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the

instructions to be followed if the user smells gas. These

instructions must be posted in a prominent location near the dryer.

Retain This Manual in a Safe Place for Future Reference

This product embodies advanced concepts in engineering, design, and safety. If this product is properly

maintained, it will provide many years of safe, efficient, and trouble free operation.

Only qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation

manual included with the dryer.

The following “FOR YOUR SAFETY CAUTION” must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

Do not store or use gasoline

or other flammable vapors

and liquids in the vicinity of

this or any other appliance.

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser d’essence

ni d’autres vapeurs ou liquides

inflammables à proximité de cet appareil

ou de tout autre appareil.

Caution: Label all wires prior to

disconnection when servicing

controls. Wiring errors can

cause improper operation.

Attention: Au moment de l’entretien des commandes,

étiquetez tous les fils avant de les débrancher. Des

erreurs de câblage peuvent entraîner un fonctionnement

inadéquat.

WARNING

CHILDREN SHOULD NOT BE ALLOWED TO PLAY ON OR NEAR THE DRYERS.

CHILDREN SHOULD BE SUPERVISED IF NEAR DRYERS IN OPERATION.

IMPORTANT

YOU MUST DISCONNECT AND LOCKOUT THE ELECTRIC SUPPLY AND THE GAS

SUPPLY OR THE STEAM SUPPLY BEFORE ANY COVERS OR GUARDS ARE

REMOVED FROM THE MACHINE TOALLOW ACCESS FOR CLEANING, ADJUSTING,

INSTALLATION, OR TESTING OF ANY EQUIPMENT PER OCCUPATIONAL SAFETY

AND HEALTH ADMINISTRATION (OSHA) STANDARDS.

CAUTION

DRYERS SHOULD NEVER BE LEFT UNATTENDED WHILE IN OPERATION.

FOR YOUR SAFETY

DO NOT DRY MOP HEADS IN THE DRYER.

DO NOT USE DRYER IN THE PRESENCE OF DRY CLEANING FUMES.

In the State of Massachusetts, the following installation instructions apply:

■Installations and repairs must be performed by a qualified or licensed contractor,

plumber, or gas fitter qualified or licensed by the State of Massachusetts.

■Acceptable Shut-off Devices: Gas Cocks and Ball Valves installed for use shall be

listed.

■A flexible gas connector, when used, must not exceed 4 feet (121.9 cm).

IMPORTANT

PLEASE OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment and/

or specified in the installation manual included with the dryer.

Dryer

must not be

installed or stored in an area where it will be exposed to water and/or

weather.

IMPORTANT

Dryer

must be

installed in a location/environment, which the ambient temperature

remains between 40° F (4.44° C) and 130° F (54.44° C).

The wiring diagram for the dryer is located in the front electrical control box area.

WARNING

UNDER NO CIRCUMSTANCES should the dryer door switches, lint drawer switch,

heat safety circuit ever be disabled.

DO NOT MODIFY THISAPPLIANCE.

The dryer

must never be

operated with any of the back guards, outer tops, or

service panels removed. PERSONAL INJURY OR FIRE COULD RESULT.

DRYER

MUST NEVER BE

OPERATED WITHOUT THE LINT FILTER/SCREEN IN

PLACE, EVEN IF AN EXTERNAL LINT COLLECTION SYSTEM IS USED.

Table of Contents

SECTION I

IMPORTANT INFORMATION ............................................................................... 3

A. Receiving and Handling ................................................................................................................... 3

B. Safety Precautions .......................................................................................................................... 4

SECTION II

SPECIFICATIONS/DIMENSIONS AND COMPONENT LOCATION................... 7

A. Specifications (Gas and Steam) ...................................................................................................... 7

B. Dimensions and Component Location ............................................................................................ 8

SECTION III

INSTALLATION PROCEDURES ........................................................................ 10

A. Reassembly of Dryer .................................................................................................................... 10

B. Location Requirements ................................................................................................................. 15

C. Fresh Air Supply Requirements .................................................................................................... 16

D. Exhaust Requirements ................................................................................................................. 17

E. Compressed Air Supply System ................................................................................................... 23

F. Electrical Information ..................................................................................................................... 25

G. Gas Information ............................................................................................................................. 29

H. Water Supply Connection for Sensor Activated Fire Extinguishing (S.A.F.E.) System ................. 32

I. Steam Information ......................................................................................................................... 33

J. Preoperational Test ....................................................................................................................... 38

K. Preparation for Operation / Start-Up .............................................................................................. 40

L. Shutdown Instructions ................................................................................................................... 41

SECTION IV

SERVICE / PARTS INFORMATION ................................................................... 42

A. Service .......................................................................................................................................... 42

B. Parts .............................................................................................................................................. 42

SECTION V

WARRANTY INFORMATION .............................................................................. 43

A. Returning Warranty Cards ............................................................................................................ 43

B. Warranty ........................................................................................................................................ 43

C. Returning Warranty Parts.............................................................................................................. 43

SECTION VI

ROUTINE MAINTENANCE ................................................................................. 45

A. Cleaning ........................................................................................................................................ 45

B. Adjustments .................................................................................................................................. 47

C. Lubrication ..................................................................................................................................... 47

SECTION VII

COMPONENT SYSTEM DESCRIPTIONS........................................................ 48

A. Tumbler Drive System .................................................................................................................. 48

B. Tumbler ......................................................................................................................................... 49

C. Air Blower Drive System ............................................................................................................... 49

D. Safety Devices .............................................................................................................................. 49

E. Steam Damper Actuator System ..................................................................................................51

SECTION VIII

MANUAL RESET BURNER HI-LIMIT INSTRUCTIONS .................................... 52

SECTION IX

DATA LABEL INFORMATION ............................................................................ 53

SECTION X

PROCEDURE FOR FUNCTIONAL CHECK

OF REPLACEMENT COMPONENTS ............................................................... 54

SECTION XI

OPTIONAL SENSOR ACTIVATED

FIRE EXTINGUISHING (S.A.F.E.) SYSTEM ...................................................... 55

SECTION XII

NON-COIN PROGRAMMING.............................................................................. 60

113549 - 8 www.adclaundry.com 3

SECTIONI

IMPORTANTINFORMATION

A. RECEIVINGAND HANDLING

The dryer is shipped in a protective stretch wrap cover with protective cardboard corners and top cover (or optional

box) as a means of preventing damage in transit. Upon delivery, the dryer and/or packaging, and wooden skid should

be visually inspected for shipping damage. If any damage whatsoever is noticed, inspect further before delivering

carrier leaves.

Dryers damaged in shipment:

1. ALL dryers should be inspected upon receipt and before they are signed for.

2. If there is suspected damage or actual damage, the trucker’s receipt should be so noted.

3. If the dryer is damaged beyond repair, it should be refused. Those dryers, which were not damaged in a

damaged shipment should be accepted, but the number received and the number refused must be noted on the

receipt.

4. If you determine that the dryer was damaged after the trucker has left your location, you should call the delivering

carrier’s freight terminal immediately and file a claim. The freight company considers this concealed damage.

This type of freight claim is very difficult to get paid and becomes extremely difficult when more than a day or two

passes after the freight was delivered. It is your responsibility to file freight claims. Dryer/parts damaged in

transit cannot be claimed under warranty.

5. Freight claims are the responsibility of the consignee, and ALL claims must be filed at the receiving end. ADC

assumes no responsibility for freight claims or damages.

6. If you need assistance in handling the situation, please contact the ADC Traffic Manager at +1 (269) 923-3000.

IMPORTANT: Thetumbler section ofthe dryermustbe transportedandhandled in anupright positionat

ALLtimes.

4 American Dryer Corporation 113549-8

B. SAFETY PRECAUTIONS

WARNING: Foryour safety, the information in this manual mustbe followedto minimize the risk of fire or

explosionortoprevent property damage,personal injury,orlossof life.

WARNING: Thedryermust never be operatedwithany of thebackguards, outer tops,orservice

panelsremoved. PERSONALINJURYOR FIRECOULDRESULT.

1. DONOT store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

2. DO NOT spray aerosols in the vicinity of this appliance while it is in operation.

3. Purchaser/user should consult the local gas supplier for proper instructions to be followed in the event the user

smells gas. The instructions should be posted in a prominent location.

4. WHAT TO DO IF YOU SMELL GAS...

a. DO NOT try to light any appliance.

b. DO NOT touch any electrical switch.

c. DO NOT use any phone in your building.

d. Clear the room, building, or area of ALL occupants.

e. Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

f. If you cannot reach your gas supplier, call the fire department.

5. Installation and service must be performed by a qualified installer, service agency, or gas supplier.

6. Dryer(s) must be exhausted to the outdoors.

7. AlthoughADC produces a very versatile dryer, there are some articles that, due to fabric composition or cleaning

method, should not be dried in it.

WARNING: Dryonly water washedfabrics. DONOTdry articles spottedor washed indry cleaning

solvents,a combustible detergent,industrial chemicals, or “allpurpose”cleaner.

EXPLOSIONCOULDRESULT.

WARNING: DONOTdry ragsor articlescoatedor contaminatedwithgasoline, kerosene,oil, paint, or

wax. EXPLOSIONCOULDRESULT.

WARNING: DONOTdry mopheads. Contaminationbywax or flammablesolventswill create afire

hazard.

WARNING: DONOTuse heat fordrying articlesthatcontainplastic,foam, sponge rubber, orsimilarly

texturedrubbermaterials. Dryingina heated tumblermay damageplastics orrubber andmay

bea fire hazard.

113549 - 8 www.adclaundry.com 5

8. The possible presence of residual quantities of aggressive or decomposed chemicals in the load may produce

damage to the machine and harmful fumes.

9. A program shouldbeestablished for the inspection and cleaning of lint in the heating unit area, exhaust ductwork,

and inside the dryer. The frequency of inspection and cleaning can best be determined from experience at each

location.

WARNING: The collection of lintintheburnerarea and exhaustductwork cancreate apotential fire

hazard.

10. For personal safety, the dryer must be electrically grounded in accordance with local codes and/or National

Electric Code ANSI/NFPA 70, or in Canada, Canadian Electric Code CSA C22.1.

NOTE: Failuretodo sowillVOIDTHEWARRANTY.

11. UNDER NO CIRCUMSTANCES should the dryer door switches, lint drawer switch, heat safety circuit ever

be disabled.

WARNING: PERSONALINJURYORFIRECOULDRESULT.

12. This dryer is not to be used in the presence of dry cleaning solvents or fumes.

13. Remove articles from the dryer as soon as the drying cycle has been completed.

WARNING: Articles left in thedryerafterthedrying and coolingcycles havebeencompletedcancreate a

firehazard.

14. DO NOT operate steam dryers with more than 125 PSI (8.62 bar) steam pressure. Excessive steam pressure

can damage steam coil and/or harm personnel.

15. Replace leaking flexible hoses or other steam fixtures immediately. DO NOT operate the dryer with leaking

flexible hoses. PERSONAL INJURY MAY RESULT.

16. READ AND FOLLOW ALL CAUTION AND DIRECTION LABELS ATTACHED TO THE DRYER.

17. For safety, proper operation, and optimum performance, the dryer must not be operated with a load less than

sixty-six percent (66%), 132 lb (59.9 kg) of its rated capacity.

WARNING: YOUMUSTDISCONNECTANDLOCKOUTTHE ELECTRICSUPPLYANDTHE

GASSUPPLYORTHESTEAM SUPPLYBEFOREANYCOVERS ORGUARDS

AREREMOVED FROMTHE MACHINETOALLOWACCESS FOR

CLEANING,ADJUSTING,INSTALLATION,ORTESTINGOFANYEQUIPMENT

PEROSHA(OccupationalSafetyandHealthAdministration)STANDARDS.

IMPORTANT: Dryermust beinstalledinalocation/environment, whichthe ambienttemperature

remainsbetween 40° F(4.44° C)and130° F(54.44° C).

6 American Dryer Corporation 113549-8

CE ONLY

IMPORTANT: Thisappliancemustonlybeinstalledandoperatedinthecountryof destination indicated on

thedryer’s dataplate. Ifthe applianceis to beinstalled and operatedin acountryother

thanthe one indicatedonthe data plate,adata plateamendmentmust be obtainedfrom

AmericanDryerCorporation.

IEC335 applies.

NOTES __________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________

This manual suits for next models

Table of contents

Other American Dryer Corp. Dryer manuals

American Dryer Corp.

American Dryer Corp. AD-75T Administrator Guide

American Dryer Corp.

American Dryer Corp. AD-202 User manual

American Dryer Corp.

American Dryer Corp. AD-120ES II User manual

American Dryer Corp.

American Dryer Corp. Wet Wash ML-79 Administrator Guide

American Dryer Corp.

American Dryer Corp. AD-15 Phase 7 User manual

American Dryer Corp.

American Dryer Corp. ADE-50S User manual

American Dryer Corp.

American Dryer Corp. AD-75THS User manual

American Dryer Corp.

American Dryer Corp. Gas/Steam Models ML-82 User manual

American Dryer Corp.

American Dryer Corp. ML-122 User manual

American Dryer Corp.

American Dryer Corp. CE 96-190 User manual

American Dryer Corp.

American Dryer Corp. AD-24 Phase 7 User manual

American Dryer Corp.

American Dryer Corp. AD-285 User manual

American Dryer Corp.

American Dryer Corp. AD-25V User manual

American Dryer Corp.

American Dryer Corp. AD/ML-310 Non-Tilt User manual

American Dryer Corp.

American Dryer Corp. AD-400 User manual

American Dryer Corp.

American Dryer Corp. AD-20 User manual

American Dryer Corp.

American Dryer Corp. AD-120ES II User manual

American Dryer Corp.

American Dryer Corp. AD-24 II User manual

American Dryer Corp.

American Dryer Corp. AD-95HS Administrator Guide

American Dryer Corp.

American Dryer Corp. ML-78III User manual

American Dryer Corp.

American Dryer Corp. Gas HSI - Phase 7/FSS AD-78 III User manual

American Dryer Corp.

American Dryer Corp. AD-360X2 User manual

American Dryer Corp.

American Dryer Corp. AD-30 (Export) Administrator Guide

American Dryer Corp.

American Dryer Corp. AD-758DV User manual

Popular Dryer manuals by other brands

Bosch

Bosch WTA79200GB Installation and operating instructions

Amana

Amana W10233410A Use and care guide

Miele

Miele TWH 780 WP operating instructions

Asko

Asko T760 user guide

Alliance Laundry Systems

Alliance Laundry Systems 25 Series Original instructions

Bosch

Bosch Logixx 10 WTB76556GB Instruction manual and installation instructions

STIEBEL ELTRON

STIEBEL ELTRON Ultronic S Operation and installation

Electrolux

Electrolux EW2H328R2 user manual

Beko

Beko DS8433RX1M user manual

Dawlance

Dawlance Spinner DS 6000 C owner's manual

Electrolux

Electrolux TP5080TW user manual

AEG

AEG TR838P4OB user manual

Indesit

Indesit IDV 75 instruction manual

Infiniton

Infiniton SD-DG85C manual

BOMANN

BOMANN WT 5019 instruction manual

Alliance Laundry Systems

Alliance Laundry Systems TMB795C Installation

Asko

Asko T793C operating instructions

Kenmore

Kenmore 8041 - 5.8 cu. Ft. Capacity Electric Dryer installation instructions