Alliance Laundry Systems SCA020VC Operation instructions

Programming

Washer-Extractor

Cabinet Hardmount

Quantum Touch Vend Control

Refer to Page 13 for Model Identification

Original Instructions

Keep These Instructions for Future Reference.

CAUTION: Read the instructions before using the machine.

(If this machine changes ownership, this manual must accompany machine.)

www.alliancelaundry.com Part No. F8669401ENR4

September 2019

WARNING

Machine installations must comply with minimum

specifications and requirements stated in the appli-

cable Installation Manual, any applicable municipal

building codes, water supply requirements, electrical

wiring regulations and any other relevant statutory

regulations. Due to varied requirements and applica-

ble local codes, this machine must be installed, ad-

justed, and serviced by qualified maintenance per-

sonnel familiar with applicable local codes and the

construction and operation of this type of machinery.

They must also be familiar with the potential hazards

involved. Failure to observe this warning may result

in personal injury, property damage, and/or equip-

ment damage, and will void the warranty.

W820

NOTE: The WARNINGS and IMPORTANT SAFETY IN-

STRUCTIONS appearing in this manual are not meant

to cover all possible conditions and situations that may

occur. Common sense, caution, and care must be exer-

cised when installing, maintaining, or operating the

machine.

Any problems or conditions not understood should be reported to

the dealer, distributor, service agent or the manufacturer.

Regulatory Statements

PRODUCT COMPLIANCE

Users of this product are cautioned not to make modifications or

changes that are not approved by Alliance Laundry Systems,

LLC. Doing so may void the compliance of this product with ap-

plicable laws and regulatory requirements and may result in the

loss of the user’s authority to operate the equipment.

UNITED STATES

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions; (1) This device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause un-

desired operation.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. How-

ever, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful inter-

ference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following meas-

ures:

• Reorient or relocate the radio or television receiving antenna.

• Increase the separation between the computer equipment or

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the radio or television receiver is connect-

ed.

• Consult the dealer or experienced radio television technician

for help.

CAUTION

To comply with the limits of the Class B device, pur-

suant to Part 15 of the FCC Rules, this device is to

comply with Class B limits. All peripherals must be

shielded and grounded. Operation with non-certified

peripherals or non-shielded cables is likely to result

in interference and reception of the device.

W1004

Radiation Exposure Statement: This equipment complies with

FCC radiation exposure limits set forth for an uncontrolled envi-

ronment. The radio installed in this equipment and is intended to

operate with minimum distance 20cm between the radiator and

your body.

Limited Channels Fixed For Use In USA: IEEE 802.11b or

802.11g or 802.11n(HT20) operation of this product in the U.S. is

firmware-limited to Channel 1 through 11.

CANADA - CAN ICES-3(B)/NMB-3(B)

This device contains license-exempt transmitter(s)/receiver(s)

that comply with Innovation, Science and Economic Develop-

ment Canada’s license-exempt RSS(s) standards. Operation is

subject to the following two conditions:

• This device may not cause interference.

• This device must accept any interference, including interfer-

ence that may cause undesired operation of the device.

Radiation Exposure Statement: This equipment complies with

Innovation, Science and Economic Development Canada’s radia-

tion exposure limits set forth for in RSS-102. The radio installed

in this equipment is installed and is intended to operate with min-

imum distance 20cm between the radiator and your body.

EUROPE

Products bearing the CE mark comply with the following EU di-

rectives:

DO NOT COPY or TRANSMIT

3 Part No. F8669401ENR4

• EMC Directive 2014/30/EU

• Low Voltage Directive 2014/35/EU

• Ecodesign Directive 2009/125/EC

• RoHS Directive 2011/65/EU

If the product has telecommunications functionality, it also com-

plies with the requirements of the following EU directive:

• Radio Equipment Directive 2014/53/EU

Compliance with these Directives implies conformity to harmon-

ized European standards that are noted in the EU Declaration of

Conformity which is available upon request.

Alliance Laundry Systems products comply with the requirement

of Article 10(2) as it can be operated in at least one Member State

as examined and the product is compliant with Article 10(10) as

it has no restrictions on putting into service in all EU member

states.

This device contains a 2.4GHz transceiver, intended for indoor

use only in all EU member states, EFTA states, and Switzerland.

Attention has been given to allowed operational frequencies. For

detailed information concerning installations in France, the user

should contact the national spectrum authority in France (http://

www.arcep.fr/ )

Be aware that outdoor installations require special attention and

will only be handled by trained and qualified installation person-

nel. No one from the general-public is permitted to install wire-

less products outdoors when external antennas, power and

grounding must be installed for use.

AUSTRALIA/NEW ZEALAND

The radio in this equipment complies with and is certified to the

Australian and New Zealand regulatory requirements.

BRAZIL ANATEL

This equipment operates in secondary status, that is, it is not enti-

tled to protection against harmful interference, even for type sta-

tions, and cannout cause interference to systems operating in pri-

mary status.

CHINA SRRC

The radio device has recieved certification of conformance in ac-

cordance with the People's Republic of China State Radio Regu-

lation Committee (SRRC) certification scheme. Integrations of

this radio into a final product does not require additional radio

certification provided installation instructions are followed. No

changes are authorized to the radio or the antenna of the ap-

proved device.

JAPAN

This product is equipped with a certified wireless device pursuant

to Article 2-1-19 of the Certification Ordinance. No changes are

authorized to the radio or the antenna of the approved device.

MEXICO IFETEL

“The operation of this equipment is subject to the following two

conditions: (1) it is possible that this equipment or device does

not cause harmful interference and (2) this equipment or device

must accept any interference, including that which may cause its

unwanted operation.”

SOUTH KOREA (KC)

The radio device has received certification of conformance in ac-

cordance with the Radio Waves Act. Integration of this radio into

a final product does not require additional radio certification pro-

vided installation instructions are followed. No changes are au-

thorized to the radio or the antenna of the approved device.

TAIWAN

The information in this section applies to products bearing the

Taiwan National Communications Commission mark:

This telecom equipment has complied with NCC regulations.

According to “Administrative Regulations of Low Power Radio

Waves Radiated Devices:

Article 12 The low-power radio-frequency devices must not be

altered by changing the frequency, enhancing emission power,

adding external antenna, and modification of original design

characteristic as well as function.

Article 14 The operation of the low-power radio-frequency devi-

ces is subject to the conditions that no harmful interference is

caused. The user must stop operating the device immediately

should harmful interference is caused and shall not resume until

the condition causing the harmful interference has been correct-

ed.

Moreover, the interference must be accepted that may be caused

by the operation of an authorized communications, or ISM equip-

ment. (1) Precautions (marked in the product manual and on out-

er packaging)

THAILAND

The information in this section applies to products approved by

the Thailand National Communications Commission:

These telecommunication and device are compliance with the re-

quirements of National Broadcasting and Telecommunication

Commission.

DO NOT COPY or TRANSMIT

4 Part No. F8669401ENR4

MIX4N_SVG

Figure 1

DO NOT COPY or TRANSMIT

5 Part No. F8669401ENR4

Table of Contents

Safety Information..................................................................................9

Explanation of Safety Messages....................................................................... 9

Important Safety Instructions........................................................................... 9

Safety Decals................................................................................................10

Operator Safety.............................................................................................10

Introduction..........................................................................................12

Model Identification......................................................................................12

Serial Plate Location..................................................................................... 17

Replacement Parts ........................................................................................18

Customer Service..........................................................................................18

Preliminary Information.......................................................................19

About the Control......................................................................................... 19

IR Communications...................................................................................... 19

IR Communications Menu..........................................................................19

Wi-Fi Communications..................................................................................19

Audit Information......................................................................................... 19

Special Features....................................................................................20

Break-In Alarm.............................................................................................20

Cycle Time Display.......................................................................................20

Cycle Completed Timer.................................................................................20

Passcode Security......................................................................................... 20

Language Selection....................................................................................... 20

Lucky Cycle.................................................................................................20

Speed Cycle................................................................................................. 20

Special Vend.................................................................................................20

Increased Water Levels..................................................................................20

Increased Spin Speed.................................................................................... 20

Dispense Soap.............................................................................................. 20

Control Identification........................................................................... 21

Operational Touch Display.............................................................................21

Operation Modes.......................................................................................... 22

Ready Mode............................................................................................. 22

Lockout Mode...........................................................................................22

Drop Off Mode......................................................................................... 22

Auto-Flush Mode...................................................................................... 23

Overflow Mode.........................................................................................23

written consent of the publisher.

DO NOT COPY or TRANSMIT

6 Part No. F8669401ENR4

Machine Error Mode..................................................................................23

Internal Control Failure..............................................................................23

Coast Down Mode.....................................................................................24

Shutdown Mode........................................................................................ 24

Out of Order Mode.................................................................................... 24

Menu Navigation.................................................................................. 26

Opening the Service Door..................................................................... 29

Stacked Washer-Extractor/Tumble Dryer.........................................................29

Machine Cycle Definition and Operation.............................................. 31

Machine Cycle Operation.............................................................................. 31

Approach Screen...........................................................................................31

Cycle Preset ................................................................................................ 32

Speed Cycle................................................................................................. 33

Pre-Clean (If Available).................................................................................33

Help Menu .................................................................................................. 34

Language Selection Panel ............................................................................. 34

Start a Cycle.................................................................................................34

Close Door Menu..........................................................................................35

Run Menu ................................................................................................... 35

Cycle Pause Menu ........................................................................................37

Cycle Complete Menu...................................................................................37

Lucky Cycle Mode........................................................................................37

Manual Programming...........................................................................38

System Menu................................................................................................38

Passcode Menu......................................................................................... 38

Save Changes Menu.................................................................................. 38

Rapid Advance Activation..........................................................................39

Cancel Cycle.............................................................................................39

Clear Active Error .................................................................................... 39

Clear Partial Vend .....................................................................................40

Change Vend Price ................................................................................... 40

Settings Menu.......................................................................................41

Vend Settings ...............................................................................................41

Basic Settings .............................................................................................. 53

Machine Settings ......................................................................................... 57

Cycle Settings...............................................................................................61

Audit Data Menu.................................................................................. 84

Diagnostics Menu..................................................................................85

Machine ID Menu.........................................................................................85

Alarms Menu................................................................................................85

DO NOT COPY or TRANSMIT

7 Part No. F8669401ENR4

Inputs/Outputs Menu.....................................................................................86

Factory Test Menu........................................................................................ 86

Individual Tests Menu................................................................................... 90

Machine Errors......................................................................................... 92

Service Schedule Menu......................................................................... 99

Reset Menu.........................................................................................100

Default Cycles.....................................................................................101

DO NOT COPY or TRANSMIT

8 Part No. F8669401ENR4

Safety Information

Explanation of Safety Messages

Precautionary statements (“DANGER,” “WARNING,” and

“CAUTION”), followed by specific instructions, are found in this

manual and on machine decals. These precautions are intended

for the personal safety of the operator, user, servicer, and those

maintaining the machine.

DANGER

Indicates an imminently hazardous situation that, if

not avoided, will cause severe personal injury or

death.

WARNING

Indicates a hazardous situation that, if not avoided,

could cause severe personal injury or death.

CAUTION

Indicates a hazardous situation that, if not avoided,

may cause minor or moderate personal injury or

property damage.

Additional precautionary statements (“IMPORTANT” and

“NOTE”) are followed by specific instructions.

IMPORTANT: The word “IMPORTANT” is used to in-

form the reader of specific procedures where minor

machine damage will occur if the procedure is not fol-

lowed.

NOTE: The word “NOTE” is used to communicate in-

stallation, operation, maintenance or servicing informa-

tion that is important but not hazard related.

Important Safety Instructions

WARNING

To reduce the risk of fire, electric shock, serious in-

jury or death to persons when using your washer,

follow these basic precautions:

W023

• Read all instructions before using the washer.

• Install the washer according the INSTALLATION instruc-

tions. Refer to the EARTH/GROUND instructions in the IN-

STALLATION manual for the proper earth/ground connection

of the washer. All connections for water, drain, electrical

power and earth/ground must comply with local codes and be

made by licensed personnel when required. It is recommend-

ed that the machine be installed by qualified technicians.

• Do not install or store the washer where it will be exposed to

water and/or weather.

• To prevent fire and explosion, keep the area around machine

free from flammable and combustible products. Do not add

the following substances or textiles containing traces of the

following substances to the wash water: gasoline, kerosene,

waxes, cooking oils, vegetable oils, machine oils, dry-clean-

ing solvents, flammable chemicals, thinners, or other flamma-

ble or explosive substances. These substances give off vapors

that could ignite, explode or cause the fabric to catch fire by

itself.

• Under certain conditions, hydrogen gas may be produced in a

hot water system that has not been used for two weeks or

more. HYDROGEN GAS IS EXPLOSIVE. If the hot water

system has not been used for such a period, before using a

washing machine or combination washer-dryer, turn on all hot

water faucets and let the water flow from each for several mi-

nutes. This will release any accumulated hydrogen gas. The

gas is flammable, do not smoke or use an open flame during

this time.

• To reduce the risk of an electric shock or fire, DO NOT use an

extension cord or an adapter to connect the washer to the elec-

trical power source.

• Do not allow children to play on or in the washer. Close su-

pervision of children is necessary when the washer is used

near children. This appliance is not intended for use by young

children or infirm persons without supervision. Young chil-

dren should be supervised to ensure that they do not play with

the appliance. This is a safety rule for all appliances.

• DO NOT reach and/or climb into the tub or onto the washer,

ESPECIALLY if the wash drum is moving. This is an immi-

nently hazardous situation that, if not avoided, will cause se-

vere personal injury or death.

• Never operate the washer with any guards, panels and/or parts

removed or broken. DO NOT bypass any safety devices or

tamper with the controls.

• Use washer only for its intended purpose, washing textiles.

Never wash machine parts or automotive parts in the ma-

chine. This could result in serious damage to the basket or

tub.

• Use only low-sudsing, no-foaming types of commercial deter-

gent. Be aware that hazardous chemicals may be present.

Wear hand and eye protection when adding detergents and

chemicals. Always read and follow manufacturer’s instruc-

tions on packages of laundry and cleaning aids. Heed all

warnings or precautions. To reduce the risk of poisoning or

Safety Information

DO NOT COPY or TRANSMIT

9 Part No. F8669401ENR4

chemical burns, keep them out of the reach of children at all

times [preferably in a locked cabinet].

• Do not use fabric softeners or products to eliminate static un-

less recommended by the manufacturer of the fabric softener

or product.

• Always follow the fabric care instructions supplied by the tex-

tile manufacturer.

• Loading door MUST BE CLOSED any time the washer is to

fill, tumble or spin. DO NOT bypass the loading door switch

by permitting the washer to operate with the loading door

open. Do not attempt to open the door until the washer has

drained and all moving parts have stopped.

• Be aware that hot water is used to flush the supply dispenser.

Avoid opening the dispenser lid while the machine is running.

• Do not attach anything to the supply dispenser’s nozzles, if

applicable. The air gap must be maintained.

• Do not operate the machine without the water reuse plug or

water reuse system in place, if applicable.

• Be sure water connections have a shut-off valve and that fill

hose connections are tight. CLOSE the shut-off valves at the

end of each wash day.

• Keep washer in good condition. Bumping or dropping the

washer can damage safety features. If this occurs, have wash-

er checked by a qualified service person.

• DANGER: Before inspecting or servicing machine, power

supply must be turned OFF. The servicer needs to wait for at

least 5 minutes after turning the power OFF and needs to

check for residual voltage with a voltage meter. The inverter

capacitor or EMC filter remains charged with high voltage for

some time after powering OFF. This is an imminently hazard-

ous situation that, if not avoided, will cause severe personal

injury or death.

• Do not repair or replace any part of the washer, or attempt any

servicing unless specifically recommended in the user-mainte-

nance instructions or in published user-repair instructions that

the user understands and has the skills to carry out. ALWAYS

disconnect the washer from electrical, power and water sup-

plies before attempting any service.

• Disconnect the power by turning off the circuit breaker or by

unplugging the machine. Replace worn power cords.

• Before the washer is removed from service or discarded, re-

move the door to the washing compartment.

• Failure to install, maintain, and/or operate this washer accord-

ing to the manufacturer’s instructions may result in conditions

which can produce bodily injury and/or property damage.

NOTE: The WARNINGS and IMPORTANT SAFETY IN-

STRUCTIONS appearing in this manual are not meant

to cover all possible conditions and situations that may

occur. Common sense, caution and care must be exer-

cised when installing, maintaining, or operating the

washer.

Any problems or conditions not understood should be reported to

the dealer, distributor, service agent or the manufacturer.

WARNING

Machine installations must comply with minimum

specifications and requirements stated in the appli-

cable Installation Manual, any applicable municipal

building codes, water supply requirements, electrical

wiring regulations and any other relevant statutory

regulations. Due to varied requirements and applica-

ble local codes, this machine must be installed, ad-

justed, and serviced by qualified maintenance per-

sonnel familiar with applicable local codes and the

construction and operation of this type of machinery.

They must also be familiar with the potential hazards

involved. Failure to observe this warning may result

in personal injury, property damage, and/or equip-

ment damage, and will void the warranty.

W820

IMPORTANT: Ensure that the machine is installed on a

level floor of sufficient strength. Ensure that the recom-

mended clearances for inspection and maintenance are

provided. Never allow the inspection and maintenance

space to be blocked.

WARNING

Never touch internal or external steam pipes, con-

nections, or components. These surfaces can be ex-

tremely hot and will cause severe burns. The steam

must be turned off and the pipe, connections, and

components allowed to cool before the pipe can be

touched.

SW014

NOTE: All appliances are produced according the EMC-

directive (Electro-Magnetic-Compatibility). They can be

used in restricted surroundings only (comply minimally

with class A requirements). For safety reasons there

must be kept the necessary precaution distances with

sensitive electrical or electronic device(s). These ma-

chines are not intended for domestic use by private

consumers in the home environment.

Safety Decals

Safety decals appear at crucial locations on the machine. Failure

to maintain legible safety decals could result in injury to the oper-

ator or service technician.

Use manufacturer-authorized spare parts to avoid safety hazards.

Safety Information

DO NOT COPY or TRANSMIT

10 Part No. F8669401ENR4

This manual suits for next models

Table of contents

Other Alliance Laundry Systems Washer manuals

Alliance Laundry Systems

Alliance Laundry Systems 801529 Service manual

Alliance Laundry Systems

Alliance Laundry Systems Speed Queen TV2000WN User manual

Alliance Laundry Systems

Alliance Laundry Systems AR105M X CONTROL Owner's manual

Alliance Laundry Systems

Alliance Laundry Systems Cygnus Premium User manual

Alliance Laundry Systems

Alliance Laundry Systems UM202 Series Owner's manual

Alliance Laundry Systems

Alliance Laundry Systems BWT820*N1102 Programming manual

Alliance Laundry Systems

Alliance Laundry Systems B-Series Installation and operation manual

Alliance Laundry Systems

Alliance Laundry Systems HC125BYV Troubleshooting guide

Alliance Laundry Systems

Alliance Laundry Systems UW100AV Troubleshooting guide

Alliance Laundry Systems

Alliance Laundry Systems EA2011 Series Assembly instructions

Alliance Laundry Systems

Alliance Laundry Systems IYB180J Owner's manual

Alliance Laundry Systems

Alliance Laundry Systems 801479R2 Guide

Alliance Laundry Systems

Alliance Laundry Systems UW60TV Operating instructions

Alliance Laundry Systems

Alliance Laundry Systems LWS16A series User manual

Alliance Laundry Systems

Alliance Laundry Systems FLW1526C Original operating instructions

Alliance Laundry Systems

Alliance Laundry Systems HX18PVQM6 Troubleshooting guide

Alliance Laundry Systems

Alliance Laundry Systems CS2000 Parts list manual

Alliance Laundry Systems

Alliance Laundry Systems HCL020HDF User manual

Alliance Laundry Systems

Alliance Laundry Systems HX SERIES Operating instructions

Alliance Laundry Systems

Alliance Laundry Systems CCN020HNF User manual

Alliance Laundry Systems

Alliance Laundry Systems F232136R5 Troubleshooting guide

Alliance Laundry Systems

Alliance Laundry Systems SFNBXFSP122DW01 User manual

Alliance Laundry Systems

Alliance Laundry Systems UW100TV User manual

Alliance Laundry Systems

Alliance Laundry Systems Home laundry Automatic Clothes Washers User manual

Popular Washer manuals by other brands

Tricity Bendix

Tricity Bendix AW 1000 W Operating & installation instructions

Panasonic

Panasonic NA-F60L5WRB operating instructions

GE WSLP1500 Dimensions and installation information

Electrolux

Electrolux EWF1284EDW Service manual

Bosch

Bosch WAN2829BSN User manual and installation instructions

LG TV2516DV3B owner's manual

LG TH2517DSAV owner's manual

VESTEL

VESTEL CMH-XL 7510 TE user manual

AEG

AEG 74335 User information

Johnson

Johnson JWF721A user manual

Beko

Beko WTE7604XLW0 owner's manual

Danby

Danby DTT100A1WDB Owner's use and care guide

Amica

Amica WA 14 Ex operating instructions

Daewoo

Daewoo DWD-F1222 instruction manual

Bosch

Bosch WAS28461AU instruction manual

Miele

Miele PW 6080 Vario manual

Finlux

Finlux FLX108CF220 user manual

Whirlpool

Whirlpool 3LBR5132AN0 Use and care guide