Product Specifications
Important Points:
1. The installation, commissioning and maintenance of this product must be carried out
in accordance with instructions given in this manual, and must be conducted by
designated, qualified and competent personnel.
2. Installation must comply with all local/National Water Supply Authority
Regulations/Bye-laws and Building and Plumbing Regulations.
3. Warning: continued use of this product in conditions outside the limits listed in this
section can severely affect the performance and reduce the effective service life and
can present potential risk to users.
Table 1: Conditions for normal use
NOTE: Mixer Valves operating outside these conditions cannot be guaranteed by
the scheme to operate as TMV3 valves.
3
Operating pressure range High pressure Low pressure
Maximum static pressure (bar) 10 10
Flow pressure, hot and cold (bar) 1to 5 0.2 to 1
Hot supply temperature (°C) 52 to 65 52 to 65
Cold supply temperature (°C) 5to 20 5to 20
Minimum temperaturedifferential
between blended water and hot or
cold supply (°C)
10 10
The SMV-001 Mixer is precision-engineered and should give continued superior and
safe performance, provided that:
1. The SMV-001 is installed, commissioned, operated and maintained in accordance
with the recommendations given in this manual.
2. Periodic attention is given, as necessary, to maintain the product in good functional
order.
The SMV-001 is designed to deliver water consistently at a safe temperature. In keeping
with every other mechanism, the SMV-001 mixer cannot be considered as being
functionally infallible therefore the SMV-001 mixer cannot totally replace the vigilance of
nursing / supervisory staff where that is necessary.
Provided it is installed, commissioned, operated and maintained within these
recommendations, the risk of failure is not eliminated but can be reduced to a minimum.
SAFETY WARNINGS
