AirLive Wl-5460apv2 User manual

QuickSetupGuide

WL-5460APv2

Wireless Access Poin

English ●●●

Polski ●●●

Español ●●●

Deutsch ●●●

Česky ●●●

Português ●●●

日本語 ●●●

Wireless Access Point

WL5460AP v2English

Important Information



The AP mode’s default IP address is 192.168.100.252



The default Subnet Mask is 255.255.255.0



The default SSID is airlive



The default Channel is 13



The default DHCP server is Disabled



The default is set to AP mode



support all 7 modes of wirless functions :

AP, Client, Bridge,WDS Repeater,Universal Repeater,

WISP(Client Router) , WISP+ Universal Repeater mode



Note: if you setup the wireless mode and push the setup button but

can’t pop-up window, please disable the pop-up blocker function

of Yahoo or Google toolbar to allow pop-up window on your browser.

LED Indicators

LED Status

Indicator Color Solid Flashing

Power Green Turns solid green when power is

applied to this device. N/A.

Status Red

Turns solid red when the device is

booting, after boot successfully, the

light turn off.

Link/Act. Green

Turns solid green when connected

and associated to at least a client

station.

Receiving/

Sending data

WEP/WPA Orange Turns solid orange when wireless

security is enabled. N/A

MAC Ctrl Orange Turns solid orange when MAC

Control is enabled. N/A

Bridge /

Repeater Orange Turn solid orange when Bridge or

Repeater is enabled. N/A

LAN 1

LAN 2 Green Turns solid green when linked to a

local network.

Receiving/

Sending data

English

Wireless Access Point

WL5460AP v

English

Wireless mode setting

This page includes all primary and major parameters for wireless mode

setting. Any parameter change will cause the device to reboot for the new

settings to take effect.

Wireless Mode: AP, Client, Bridge, Repeater , WISP mode

The default is set to AP mode. you can select to change it to other modes. .

Network Type: When in Client mode, you can select between Ad-Hoc

andInfrastructure

Repeater Type: When in Repeater mode, you can select between

WDS Repeater and Universal Repeater

WISP Type: When in WISP mode, you can setup WISP(Client Router) ,

or also select enable Universal Repeater that active

WISP+ Universal Repeater mode

Installation Steps

1. Please install your network cards first before the AP

2. Screw-in the antenna (clockwise) into the Antenna connector

3. Connect the power and LAN cable to the back

4. Use your wireless card to do a site survey, the default SSID is

airlive and Channel is 13

5. If you need to change AP’s configuration, please follow the

procedure below:

The AP’s default IP address is 192.168.100.252. Please make

sure your computer IP is in the same subnet as the AP (i.e.

192.168.100.x)

Open the web browser and enter 192.168.100.252.

English

Wireless Access Point

WL5460AP v

English

Client, Bridge mode setup

Bridge Mode

Device B:

Mode: Bridge

Device A:

Mode: Bridge

Please make sure both A and B are set to the same channel

Client Mode

Device B:

WISP Outdoor AP

Network Type: Infrastructure

Device A:

Mode: Client

Please make sure both A and B are set to the same ESSID and channel

English

Wireless Access Point

WL5460AP v

English

Device A:

Mode: WDS Repeater

Mac Address: Device B’s AP

Mac Address

WDS Repeater mode setup

Device B:

WDS Wireless AP/ Router

Mac Address: Device A’s AP Mac

Address

WDS Repeater Mode

1. Please make sure both A and B are set to the same channel number

2. Add other’s AP MAC Address(BSSID) that the Repeater want to connect

(Please make sure remote wireless AP/Router support WDS function)

3. Setup Wireless security function (Repeater->Security->Setup)

between WDS repeater and Wireless Client use same authentication

and encryption for wirless LAN connection. For details,please refer the

user’s manual

English

Wireless Access Point

WL5460AP v

English

Universal Repeater Mode

Device B:

Wireless Router

Universal Repeater doesn’t require the remote device to have WDS function

Universal Repeater setup

Device A:

Mode: Universal Repeater

1. Please make sure both A and B are set to the same channel number

2. type the other AP/Router’s SSID in the “SSID of Extended Interface”

field that the repeater want to connect.

Note: the device SSID and the SSID of extended interface can be the same

or different. When you are using the universal repeater mode,

please make sure the remote AP/Router WDS function is turned off..

WISP Mode (Client Router)

Device B: WISP outdoor AP

Device A:

Mode: WISP (Client Router)

WISP mode setup

English

Wireless Access Point

WL5460AP v

English

WISP+Universal Repeater mode

Device B: WISP outdoor AP Device A:

Mode: WISP+Universal

In this mode,WL-5460APv2 behaves virtually the same as WISP mode

but the AP can also send wireless signal to the LAN side.

the output power is divided between 2 wireless side and proper antenna

installation can influence the performance greatly.

1. please click the “Site Survey” buttion to search and connect the WISP

Outdoor AP device

2. in WISP mode,please click the WAN port setup button for WAN

port configuration,choose the WAN Access Type and type some

Information in other filed. For details,pleaser refer the user’s manual.

As the Client Router mode In WISP mode settings , also select the

“Enable Universal Repeater Mode” And enter the SSIDO in the SSID of

Extended intferface field that will enable WISP+Universal Reapter mode.

English

Wireless Access Point

WL5460AP v2Polski

Ważne Informacje



Domyślnie adres IP to 192.168.100.252



Domyślnie maska podsieci to 255.255.255.0



Domyślnie SSID to airlive



Domyślnie kanał13



Domyślnie urządzenie pracuje w trybie AP



Wsparcie dla 7 trybów pracy

AP, Client, Bridge,WDS Repeater,Universal Repeater,WISP(Client

Router) , WISP+ Universal Repeater



Uwaga: Jeżeli podczas konfiguracji sekcji sieci bezprzewodowej nie

możesz uzyskaćdostępu do panelu konfiguracyjnego, sprawdźczy

Twoja przeglądarka internetowa nie blokuje okienek typu pop-up.

Wzkaźniki LED

Polski

LED Status

Wzkaźnik Kolor Wskaźnik świeci stale Wzkaźnik mruga

Power Zielony Sygnalizacja zasilania

urządzenia. -

Status Czerwony Kolor czerowny oznacza

wczytywanie konfiguracji. -

Link/Act. Zielony

Sygnalizacja połączenia

radiowego z co najmniej

jednym klientem sieci

bezprzewodowej.

Nadawanie/Odbiór

WEP/WPA Pomarańczowy

Sygnalizuje włączony

protokółszyfrowania

transmisji WiFi.

MAC Ctrl Pomarańczowy Sygnalizuje włączonąfunkcję

filtrowania adresów MAC. -

Bridge /

Repeater Pomarańczowy Sygnalizuje tryb pracy Bidge

lub Repeater. -

LAN 1

LAN 2 Zielony Sygnalizuje podłączenie stacji

roboczych do portów LAN1/2. Nadawanie/Odbiór

Wireless Access Point

WL5460AP v

Polski

Wsparcie dla 7 trybów pracy

Poniższe informacje dotycząkonfiguracji podstawowych parametrów

urządzenia. Zmiana konfiguracji prowadzi do ponownego uruchomienia

urządzenia.

Tryb pracy: AP, Client, Bridge, Repeater , WISP.

Fabrycznie punkt dostępowy pracuje w trybie AP.. .

Topologia sieci:

W trybie Client możesz wybraćtopologięAd-Hoc lub Infrastructure

Tryb Repeater:

W trybie Repeater możesz wymusićtryb pracy WDS Repeater lub

Universal Repeater.

Tryb WISP:

W trybie WISP możesz wybraćfunkcjęWISP(Client Router) oraz

dodatkowo zaznaczyćopcjęUniversal Repeater.

Procedura Instalacji

Polski

1. Przed przystąpieniem do instalacji upewnij się, że karty radiowe

działająpoprawnie.

2. Przykręć dołączonądo urządzenia antenkędo gniazda antenowego.

3. Podłącz zasilanie i kable Ethernet do portów LAN/LAN2.

4. Uruchom na komputerze z aktywnąkartąradiowąfunkcję

wyszukiwania sieci bezprzewodowych. Domyślnie SSID to airlive,

kanał13.

5. W celu modyfikacji domyślnych ustaleńuruchom przeglądarkęWEB

Domyślny adres IP to 192.168.100.252. Upewnij się, że komputer

jest zaadresowany adresem IP z tej samej podsieci

(np. 192.168.100.x)

W przeglądarce w polu adres wprowadź192.168.100.252.

Wireless Access Point

WL5460AP v

Polski

Konfiguracja trybu Client,Bridge

Tryb Bridge

Urządzenie B:

Tryb: Bridge

Urządzenie A

Tryb: Bridge

UWAGA: Urządzenia musząpracowaćna tym samym kanałe i miećtaki

sam indentyfikator sieci ESSID

UWAGA: Urządzenia musząpracowaćna tym samym kanałe i miećtaki

sam indentyfikator sieci ESSID

Tryb Client

Urządzenie B:

Connect:: WISP Outdoor AP

Network Type: Infrastructure

Urządzenie A:

Tryb: Client

Polski

Table of contents

Languages:

Other AirLive Wireless Access Point manuals

AirLive

AirLive WH-5000A User manual

AirLive

AirLive WL-5450AP User manual

AirLive

AirLive WH-9200AP User manual

AirLive

AirLive WH-5400CPE User manual

AirLive

AirLive AP60 User manual

AirLive

AirLive AP60-EU User manual

AirLive

AirLive WLA-500AP User manual

AirLive

AirLive WL-5450AP User manual

AirLive

AirLive WHA-5500CPE User manual

AirLive

AirLive WH-9200AP User manual

AirLive

AirLive WT-2000AP User manual

AirLive

AirLive WMM-3000AP User manual

AirLive

AirLive WHP-1100 User manual

AirLive

AirLive TOP-12AC Installation and operation manual

AirLive

AirLive WH-5400CPE User manual

AirLive

AirLive WIAS-1200G User manual

AirLive

AirLive AC.Top1 Setup guide

AirLive

AirLive WLA-5000AP User manual

AirLive

AirLive AC-1200R User manual

AirLive

AirLive WL-5450AP User manual

AirLive

AirLive WL-5450AP User manual

AirLive

AirLive WL-1100AP Setup guide

AirLive

AirLive WLA-5200AP-G User manual

AirLive

AirLive AC.TOP User manual

Popular Wireless Access Point manuals by other brands

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Quick installation guide

Ubiquiti

Ubiquiti NanoStation NSM2 quick start guide

Cisco

Cisco Aironet 1550 Series Getting started guide

Aruba

Aruba IAP-335 user guide

Advantek Networks

Advantek Networks AWN-AP-54MR user manual

IP-COM

IP-COM AP355 user guide

Buffalo

Buffalo AirStation WLA-L11G user manual

EnGenius

EnGenius EnStationACv2 user manual

D-Link

D-Link DAP-3662 Quick installation guide

xG Technology

xG Technology xMax CN1300 installation guide

Widelink

Widelink ezWave WAP-1100 Series user guide

Edimax

Edimax CAP1200 user manual

Ubiquiti

Ubiquiti LBE-5AC-Gen2 quick start guide

Aruba

Aruba AP-203R installation guide

LuXout Shades

LuXout Shades LUXSHADE MOTION manual

CreatComm

CreatComm TB5F user manual

SineDigital

SineDigital MW-1500AP(H) installation guide

TP-Link

TP-Link AP9650 V1 Quick installation guide

AirLive wl-5460apv2 User manual

Popular Wireless Access Point manuals by other brands